• Korean Journal of Microbiology
• /
• v.42 no.3
• /
• pp.210-215
• /
• 2006

Diplodia gossypina ATCC10936 produced chiral specific (+)-jasmonic acid (JA) that is the most biologically active form. (+)-JA is a plant growth hormone and also one of the most important aroma compounds responsible for jasmin-like aroma note. In order to develop a commercial bioprocess for the production of (+)-JA, optimal culture conditions for D. gossypina ATCC10936 were investigated. D. gossypina produced (+)-JA using either fructose and glucose as a sole carbon source. As a nitrogen source, $NaNO_3$ gave relatively high (+)-JA production. The optimal temperature for the production of (+)-JA by D. gossypina was $28^{\circ}C$, and optimal agitation was found to be 200 rpm. D. gossypina produced (+)-JA upto 600 mg/L in SM medium, although the highest level of biomass was obtained in PDMYS medium.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.447-452
• /
• 1992

The optimal FIR filter and smoother for estimating the state of 2-D state-space model are derived. Using the 2-D state covariance propagation rule suggested in this paper, the efficient algorithm to find the impulse response of the optimal FIR filter and smoother can be found. The filter and smoother can be applied to the image restoration problems and some examples of the application will be given.

• Geomechanics and Engineering
• /
• v.32 no.4
• /
• pp.387-396
• /
• 2023

Ground subsidence, which is a current concern that affects piled raft foundations, has occurred at a high rate in Ho Chi Minh City, Viet Nam, due primarily to groundwater pumping for water supply. In this study, the groundwater level (GWL) change affect on a piled raft foundation was investigated based on the three-dimensional finite element method (3D-FEM) using the PLAXIS 3D software. The GWL change due to global groundwater pumping and dewatering were simulated in PLAXIS 3D based on the GWL reduction and consolidation. Settlement and the pile axial force of the piled raft foundation in Ho Chi Minh subsoil were investigated based on the actual design and the proposed optimal case. The actual design used the piled foundation concept, while the optimal case applied a pile spacing of 6D using a piled raft concept to reduce the number of piles, with little increased settlement. The results indicated that the settlement increased with the GWL reduction, caused by groundwater pumping and dewatering. The subsidence started to affect the piled raft foundation 2.5 years after construction for the actual design and after 3.4 years for the optimal case due to global groundwater pumping. The pile's axial force, which was affected by negative skin friction, increased during that time.

• Proceedings of the Technology Innovation Conference
• /
• 2005.02a
• /
• pp.42-56
• /
• 2005

Firms cooperating in R&D face a moral hazard problem, because with R&D effort not being observable each partner will focus on its own profit when choosing its effort level. This paper aims to explain the use of optimal license contract for R&D cooperation such as cross-licensing agreement. We argue that in the situations of asymmetric information, the optimal incentive scheme that can solve moral hazard problem is . a linear function of the likelihood ratio. Especially in the case of parallel research, each firm has an extra incentive for cooperative R&D effort, given by the license fee that considers the profit of the cooperating firm, which solely depends on his R&D success if the cooperating firm fails.

• The Korean Journal of Applied Statistics
• /
• v.10 no.1
• /
• pp.69-84
• /
• 1997

We consider a linear calibration problem, $y_i = $$\alpha + \beta (x_i - x_0) + \epsilon_i$, $i=1, 2, {\cdot}{\cdot},n$ $y_f = \alpha + \beta (x_f - x_0) + \epsilon, $ where we observe $(x_i, y_i)$'s for the controlled calibration experiments and later we make inference about $x_f$ from a new observation $y_f$. The objective of the calibration design problem is to find the optimal design $x = (x_i, \cdots, x_n$ that gives the best estimates for $x_f$. We compare Kim(1989)'s Bayesian design which minimizes the expected value of the posterior variance of $x_f$ and some optimal designs from literature. Kim suggested the Bayesian optimal design based on the analysis of the characteristics of the expected loss function and numerical must be equal to the prior mean and that the sum of squares be as large as possible. The designs to be compared are (1) Buonaccorsi(1986)'s AV optimal design that minimizes the average asymptotic variance of the classical estimators, (2) D-optimal and A-optimal design for the linear regression model that optimize some functions of $M(x) = \sum x_i x_i'$, and (3) Hunter & Lamboy (1981)'s reference design from their paper. In order to compare the designs which are optimal in some sense, we consider two criteria. First, we compare them by the expected posterior variance criterion and secondly, we perform the Monte Carlo simulation to obtain the HPD intervals and compare the lengths of them. If the prior mean of $x_f$ is at the center of the finite design interval, then the Bayesian, AV optimal, D-optimal and A-optimal designs are indentical and they are equally weighted end-point design. However if the prior mean is not at the center, then they are not expected to be identical.In this case, we demonstrate that the almost Bayesian-optimal design was slightly better than the approximate AV optimal design. We also investigate the effects of the prior variance of the parameters and solution for the case when the number of experiments is odd.

• Journal of Mechanical Science and Technology
• /
• v.16 no.1
• /
• pp.75-82
• /
• 2002

A simultaneous optimal design problem of structural and control systems is discussed by taking a 3-D truss structure as an object. We use descriptor forms for a controlled object and a generalized plant because the structural parameters appear naturally in these forms. We consider a minimum weight design problem for structural system and disturbance suppression problem for the control system. The structural objective function is the structural weight and the control objective function is $H_{\infty}$ norm from the disturbance input to the controlled output in the closed-loop system. The design variables are cross sectional areas of the truss members. The conditions for the existence of controller are expressed in terms of linear matrix inequalities (LMI) By minimizing the linear sum of the normalized structural objective function and control objective function, it is possible to make optimal design by which the balance of the structural weight and the control performance is taken. We showed in this paper the validity of simultaneous optimal design of structural and control systems.

• Journal of Bio-Environment Control
• /
• v.14 no.4
• /
• pp.269-274
• /
• 2005

The purpose of this experiment was to investigate optimal ionic concentration of nutrient solution for water culture of young welsh onion (Allium fistulosum). For the purpose of clarification of optimal nutrient concentration to maximize growth of young welsh onion, different nutrient concentrations of Yamazaki's solution for welsh onion seedling $(NO_3^--N\;9.0,\;NH_4^+-N\;3.0,\;PO_4^{3-}-P\;6.0,\;K^+7.0,\;Ca^{2+}\;2.0,\;Mg^{2+}\;2.0,\;and\;SO_4^{2-}-S\;4.4me{\cdot}L^{-1})$ which selected by prior experiment were treated as 0.6, 1.2, 1.8, and $2.4dS{\cdot}m^{-1}$. Increments of fresh weight, dry weight and top length were the highest in 1.2 and, in the next, were placed by the order of 1.8, 2.4, and $0.6dS{\cdot}m^{-1}$ The regression coefficients for the maximal growth of fresh weight of cv. 'Geurnjanguedaepa' and 'Tokyokuro' were $y=-42.091x^2+171.79x+11.047 (R^2=0.8946,\; R=0.9458^*)\;and\;y=-50.069x2+157.58x+15.414(R^2=0.9343,\;R=0.9692^{**})$, respectively, and optimal EC levels according to regression coefficients were 1.68 and $1.57dS{\cdot}m^{-1}$. As the conclusions, optimal nutrient levels far young welsh onion were $1.2dS{\cdot}m^{-1}$ EC in the early growth stage and $1.6\~l .7dS{\cdot}m^{-1}$ in the later growth stage.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.5
• /
• pp.42-49
• /
• 1994

In this paper we consider efficient 1-D and 2-D linear-phased half-band filter designs. We first introduce a new derivation of the existing Vaidynathan-Nguyen 's half-band filter design method, which verifies that the design provides optimal half-band filters. We then propose an approximately-linear-phased IIR half-band filter design method, which is based on the all-pass equalizer design with the linear phase -$\omega$/2. Finally, we propose an efficient method to design optimal 2-D half-band filters, for which we utilize a 2-D all pass prototype filter of half the order of the desired 2-D half-band filters.

• Journal of applied mathematics & informatics
• /
• v.16 no.1_2
• /
• pp.355-369
• /
• 2004

The paper determines by control-theoretic means the optimal dose of fertilizer to be used to two plants for maintaining optimal revival of their growths, which are retarded mainly due to the toxicity contributed by the plants jointly.

• Journal of Microbiology and Biotechnology
• /
• v.7 no.5
• /
• pp.318-322
• /
• 1997

In order to isolate a microorganism having preferential degradation of D-carnitine from DL-carnitine, a bacterium assimilating D-carnitine as a sole carbon and energy source was isolated from soil by enrichment culture and partially identified as Enterobacter sp. Also, a mutant having lessened L-carnitine decomposition rates was selected with nitrosoguanidine mutagenesis, which led to decrease the specific activities of carnitine dehydrogenase (7.6-fold) and ${\beta}$-hydroxybutyrate dehydrogenase (9.5-fold) as compared to the wild strain. Meanwhile, optimal culture conditions for optical resolution of DL-carnitine were investigated. Under optimal conditions, 3.53 g/l L-carnitine was obtained from 20 g/l DL-carnitine, which corresponded to 35.3% L-carnitine yield and 97.9% optical purity.