• Korean Journal of Optics and Photonics
• /
• v.16 no.4
• /
• pp.384-391
• /
• 2005

A polymer optical microring resonator, which is laterally coupled to a straight bus waveguide, has been proposed and demonstrated using a nanoimprint technique. The propagation loss of the ring waveguide and the optical power coupling between the ring and bus waveguides was calculated by using a beam propagation method, then the dependence of the device performance on them was investigated using a transfer matrix method. We have especially introduced an imprint stamp incorporating a smoothing buffer layer made of a silicon nitride thin film. This layer played an efficient role in improving the sidewall roughness of the waveguide pattern engraved on the stamp and thus reducing the scattering loss. As a result the overall Q factor of the resonator was greatly increased. Also it reduced the gap between the ring and bus waveguides effectively to enhance the coupling between them, without relying on the direct writing method based on an e-beam writer. As for the achieved device performance at the wavelength of 1550 nm, the quality factor, the extinction ratio, and the free spectral range were ~103800, ~11 dB, and 1.16 m, respectively.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6D
• /
• pp.541-552
• /
• 2010

The light rail transit (LRT) having bus lines as subsystem is being constructed or planned in the suburban area of metropolitans and medium size cities. However, there is difficulty in establishing the service coverage (SC) of the LRT because the LRT is a completely new transit mode in Korea. The purpose of this study is to provide the basic data and techniques to be used for establishing the SC of the future LRT by understanding the SC characteristics of buses and subways and building models to estimate the walking distances of their users. Busan City is selected as the study city and the SC's of buses and subways are surveyed simultaneously. A total of 9 variables for 82 stations are collected and the cluster analysis is conducted about the variables. The station areas are divided to three types of CBD (Central Business District), sub-CBD and regional center based on the analysis. A station in each area is selected as the study station. At the walking distance (WD) analysis for each mode, the 80 percentile WD of the subway is 672 m and that of the bus is 472 m. In comparing the SC's of both modes by the type of station areas, there are not significant differences between the SC's of sub-CBD and regional center except CBD. At analysis of the relationship between the personal attributes and the WD, for subway users the WD of female is longer than that of male and apartment residents use subway more positively than single house residents do. For the models to estimate the walking distances, the simple regression models were built employing the income as independent variable by dividing the stations into CBD abd non-CBD stations.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1D
• /
• pp.17-23
• /
• 2009

Due to the rapid increase of vehicles on the street, Korean society is facing worsening traffic congestions and air pollutions. Also, the oil price pickup has led to increasing need for the use of public transportation. In particular, transfering among public transportation may be a main factor for riders who are commuting for a long distance journey. In order to ensure such connectivity, transfer stations have been actively built in Korea. However, it would be necessary to shift those vehicles, from cars to public transportations by enhancing the users' satisfaction with public transportation through strategies for minimizing the users' waiting cost by building an efficient connective system between transportation modes as well as the preparation of aforementioned transfer stations. Therefore, this study aimed to develop an algorithm for minimizing transferring passengers' waiting costs based on service intervals of linked buses within the transfer facilities. In order to adjust the service interval, we calculated the total costs, involving the wait cost of transfer passengers and bus operation costs, and produced an allocation interval, that would minimize the costs. We selected a KTX departing from Seoul station, and a No. 6014 bus route in Gwangmyeong city where it starts from the Gwangmyeong station in order to for verifying the model. Then, the transfer passengers' total waitting cost was reduced equivalent to the maximum of 212 minutes, and it revealed that the model performed very effectively.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4D
• /
• pp.467-472
• /
• 2009

Even if Seoul City administration improved its public transportation service, transportation model share in seoul has not been increased. Subway user is also decreasing. Therefore, policy transition into TOD(Transit Oriented Development) should be applied in oder to enhance subway modal share. This paper develops a influencing model by using variables of transportation demand and supply. In addition, it provides major influencing factors for users in subway station area and level of transportation supply based on the analysis results. The results show that: first, cluster analysis presents that traffic pattern is proved to be different according to land use characteristics(residence, non-residence); second, main transportation variables such as transferring distance, the number of bus stop, the number of short distant bus lines, and the number of bicycle are more supplied in residential area compared to non-residential areas; third, the number of lines, bus dispatching interval, operating time, and distance between subway stations are more supplied in non-residential areas than residential areas. All in all, the results will be useful for providing priority of considerations in case of decision-making on public transportation policy in subway station area.

• International journal of advanced smart convergence
• /
• v.4 no.1
• /
• pp.64-70
• /
• 2015

This paper proposes fluorescent electronic ballast with high power factor and low line input current harmonics. The system performance can be improved by a charged pump circuit. Details of design and circuit operation are described. The proposed electronic ballast is modified from single-stage half bridge class D electronic ballast by adding capacitor parallel with each power switch and setting the circuit parameter to operate under class DE inverter condition. By using this proposed method the DC bus voltage can be reduced around by 50% compare with conventional class D inverter circuit. Because the power switches are operated at zero voltage switching condition and low dv/dt of class DE switching. The experimental results show that the proper frequency of the prototype is around 50 kHz with input power factor of 0.982, $THD_i$ 10.2% at full load and efficiency of more than 90%.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.4
• /
• pp.198-204
• /
• 2003

In this paper, we presented a new algebraic iterative algorithm for the optimal control of the nonlinear systems. The algorithm is based on two steps. The first step transforms nonlinear optimal control problem into a sequence of linear optimal control problem using the quasilinearization method. In the second step, TPBCP(two point boundary condition problem) is solved by algebraic equations instead of differential equations using the new integral operational matrix of BPF(block pulse functions). The proposed algorithm is simple and efficient in computation for the optimal control of nonlinear systems and is less error value than that by the conventional matrix. In computer simulation, the algorithm was verified through the optimal control design of synchronous machine connected to an infinite bus.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.296-297
• /
• 2011

Many applications involving induction motors that are controlled using variable frequency drives require the ability to stop quickly. These applications include emergency stops, quick stopping of fans, centrifuges, presses, etc. The technique that is widely accepted in the industry for achieving quick stopping makes use of brake resistors in series with a power semiconductor switch. The switch-resistor combination (brake-unit) is applied across the dc bus. The fastest decelerating time achievable depends on the size of the resistors and the switch employed. In this paper, the authors propose a novel method of achieving quick stopping times without the use of any brake-unit. Experimental test results with and without this method on a large inertia motor-load combination show that the proposed stopping method is able to reduce the stopping time significantly compared to normal decelerated stop without the need for a braking unit.

• Journal of Mechanical Science and Technology
• /
• v.18 no.11
• /
• pp.2049-2057
• /
• 2004

In this study, the combustion characteristics and durability of a diesel engine using emulsified fuel was investigated. Water was used in oil type emulsified fuel. In order to understand the effect of emulsified fuel in a wide range of engine running conditions, D-13 mode was selected as a test condition, and a durability test was included to understand the long-term effect of water. Combustion pressure in a cylinder, exhaust emissions, specific fuel consumption, sound level and maximum torque were measured. NOx and PM were simultaneously reduced and the specific fuel consumption was increased and decreased at low and high loads, respectively. There was no trouble and any damage on the parts of the cylinder during a 500 hour durability test.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.5
• /
• pp.199-204
• /
• 2006

To develop a safety-critical network in nuclear power plants that puts more stringent requirements than the competitive commercial ones do, we establish four design criteria - deterministic communication, explicit separation/isolation structure, reliability, verification & validation. According to those design criteria, the fundamental design elements are chosen as follows - a star topology, point-to-point physical link, connection-oriented link control and fixed allocation access control. After analyzing the design elements, we also build a communication architecture with TDM (Time Division Multiplexing) bus switching scheme. Finally, We develop a DDCNet (Deterministic Data Communication Network) based on the established architecture. The DDCNet is composed of 64 nodes and guarantees the transmission bandwidth of 10Mbps and the delay of 10 msec for each node. It turns out that the DDCNet satisfies the aforementioned design criteria and can be adequately utilized for our purpose.

• Proceedings of the KIEE Conference
• /
• 2000.11a
• /
• pp.196-198
• /
• 2000

The UPFC is a new transmission power flow controller that has the ability to provide dynamic bus voltage control, series real power flow control and series reactive power control. With all of these versatile capabilities, it can provide transmission planner with a new tool to resolve system concerns for a wide variety of system conditions. This paper will describe UPFC system characteristics, operation status under special network systems and outline some advantageous applications. The first UPFC in Korea will be installed and operated by KEPRI and Hyosung Co.