• Journal of Electrical Engineering and Technology
• /
• 제13권5호
• /
• pp.1901-1907
• /
• 2018

This paper is a study for accurate iron loss calculation of a cylindrical linear machine for free piston engine. This study presents that it is possible to accurately predict power loss in ferromagnetic laminations under magnetic flux by specially considering the dependence of hysteresis, classical, and excess loss components on the magnetic induction derivative. Significant iron loss in the armature core will not only compromise the machine efficiency, but may also result in excessive heating, which could lead to irreversible deterioration in the machine performance. Thus, correct prediction of power losses under a distorted flux waveform is therefore an important prerequisite to machine design, particularly when dealing with large apparatus where stringent efficiency standards are required. Finally, it will be discussed about the iron loss in various materials of cylindrical linear electric machine by geometric and electrical parameters. It will give elaborate information about the perfect design and design rules of cylindrical linear machine and in parallel tools for the calculation, simulation and design will be available.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권3호
• /
• pp.275-282
• /
• 2013

Applications such as vibration isolation, gravity compensation, pick-and-place machines, etc., would benefit from (long-stroke) cylindrical/tubular permanent magnet (PM) actuators with integrated passive gravity compensation to minimize the power consumption. As an example, in component placing (pick-and-place) machines on printed circuit boards, passive devices allow the powerless counteraction of translator including nozzles or tooling bits. In these applications, an increasing demand is arising for high-speed actuation with high precision and bandwidth capability mainly due to the placement head being at the foundation of the motion chain, hence, a large mass of this device will result in high force/power requirements for the driving mechanism (i.e. an H-bridge with three linear permanent magnet motors placed in an H-configuration). This paper investigates a tubular actuator topology combined with passive gravity compensation. These two functionalities are separately introduced, where the combination is verified using comprehensive three dimensional (3D) finite element analyses.

• 한국융합학회논문지
• /
• 제12권12호
• /
• pp.273-280
• /
• 2021

본 연구는 하이브리드 자동차의 리니어 오실레이팅 전기기기의 비교 연구를 위해 수행하였으며, 다섯 가지(직각좌표형, 영구자석 매입 원통형, 자속역전식, 릴럭턴스 원통형, 횡자속 형태.)의 제안된 형태의 비교를 통해 리니어 오실레이팅 전기기기의 연구결과를 제시하였다. 모든 형태는 초기 모델링으로서 누설을 고려한 등가자기회로법을 통해 수행되었다. 영구자석 형태의 이동자로 구성된 직각좌표형은 구속조건 아래에서 설계변수들의 파라미터 분석을 통한 최적화 과정이 수행되었고, 영구자석 매입 원통형은 이동자에 영구자석과 Back-iron이 결합된 구조를 제시하였다. 자속역전식은 영구자석형 이동자의 매입형태에 따른 분석과 향상된 모델을 제시하며, 릴럭턴스 원통형은 유효 자속의 증가와 리플을 저감하기 위한 이동자 치의 형태를 비교·분석하였다. 횡자속 형태에서는 2차원 분석기법과 3차원 분석을 통한 비교를 수행하였다. 본 연구는 설계 규칙과 리니어 오실레이팅 전기기기의 특성을 제공한다는 측면에서 의미가 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.19-21
• /
• 1997

This paper treated a new method that generates the dipole magnetic field for high speed machines by using Halbach array, which was suggested by Klaus Halbach. The Halbach array can produce the various field distribution without magnetic materials. Therefore, the iron losses can be reduced. This paper presented the magnetic characteristics on both linear and cylindrical Halbach array. And the Halbach array for dipole field was manufactured with Nd-Fe-B magnets having 1.17(T), the measured flux density was compared the theoretical values acquired by three dimensional FEM analysis. Finally, the magnetic characteristics of Halbach array were compared with those of other conventional dipole field systems.

• Journal of Biosystems Engineering
• /
• 제35권3호
• /
• pp.163-168
• /
• 2010

With income growth and "well-being" trends, sales of corn has been increased recently. Corns are processed at processing facilities on the main production site. Corn processing steps include removing bract, steaming, vacuum packing, and storing. To replace manual corn bract removing, some bract removing machines were imported and used. However, the machines were abandoned shortly, because of high damaging ratio of corns. In this research, factors of successful bract removing was studied with rotating rollers and air-injection nozzles to develop corn bract removing system. The test device was composed of a cylindrical roller, an air spray nozzle, a regulator, and a motor. Designing factors were roller type, diameter of air spraying nozzle, spraying angle, and spraying pressure. The measured factors were bract removing rate and damaging rate. It was found that optimum cylindrical roller surface shape was cylindrical roller and linear grove roller. This roller shape produced lowest damaging rate. Test results of the efficacy of preprocessing showed that the air spraying after preprocessing produced highest performance. The rotational speed and inclination of the roller didn't affect the bract removing performance. Optimum injection angle of the air jet nozzle was $70^{\circ}$. To increase bract removing rate and to reduce corn damage, required injection pressure and injection nozzle diameter were decided to less than 0.4 MPa and 2.5 mm, respectively. More than 3 times of nozzle passing produced good bract removing performance and there were no significant difference between the number of passing times.

• 한국정밀공학회지
• /
• 제31권12호
• /
• pp.1121-1126
• /
• 2014

To compensate location error of ultrasonic horn, the laser scanning system based on the galvanometer scanner is developed. It consists of the 3-Axis linear stage and the 2-Axis galvanometer scanner. To measure surface shape of three-dimensional free form surface, the dynamic focusing unit is adopted, which can maintain consistent focal plane. With combining the linear stage and the galvanometer scanner, the scanning area is enlarged. The scanning CAD system is developed by stage motion teaching and NURBS method. The laser scanning system is tested by marking experiment with the semi-cylindrical sample. Scanning accuracy is investigated by measured laser marked line width with various scanning speed.

• Journal of Yeungnam Medical Science
• /
• 제5권2호
• /
• pp.31-36
• /
• 1988

회전조사시 회전각도에 따른 계산치와 측정치를 비교, 검토하여 마음과 같은 결과를 얻었다. $90^{\circ}$ 회전시에는 계산치와 측정치와는 4.5%의 차이를 나타내었고 $120^{\circ}$ 회전시에는 4.4%, $180^{\circ}$ 회전시에는 3.9%, $240^{\circ}$ 회전시에는 2.9%, $360^{\circ}$ 회전시에는 2.1%의 차이를 나타내어 회전각도가 클수록 계산치와 측정치와의 차이는 적은 것으로 나타났다. 또한 회전각도에 따라 최고선량지점이 상부로 이동하는 정도는 $90^{\circ}$에서 $240^{\circ}$까지 회전할 때 tumor depth가 4.5cm일 경우에 는 1.67cm에서 1.10cm 정도 상부로 이동하였으며, tumor depth가 8cm일 경우에는 2.45cm에서 1.40cm 정도 상부로 이동하는 것으로 나타났다.