• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.6
• /
• pp.900-906
• /
• 2000

The remarkable progress of electronics and radio communications technology has made our life abundant. On the other hand, the countermeasure of EMl/EMC becomes more important socially according to the increased use of electromagnetic waves. It had been required that the absorbing ability of an electromagnetic wave absorber is more than 20 dB, the bandwidth of which is required through 30 MHz to 1,000 MHz for satisfying the international standard about an anechoic chamber for EMl/EMS measurement. From November of 1998, however, the CISPR11 has accepted the extended frequency band to 18 GHz in the bandwidth of EMI measurement. In this paper, we proposed the cut corn type and cylinder type absorbers satisfying the above requirments and carried out broadband design using the equivalent material constants method.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.166-166
• /
• 2003

Muskmelon(Cucumis melo L.)은 독특한 향기와 높은 당도로 각광받고 있는 과일로 주로 지중해, 아시아, 북유럽과 미주지역에서 광범위하게 재배되고 있으며 우리나라에서는 주로 시설 내에서 재배되고 있다. 점차 그 수요가 증가하고 있는 fresh-cut제품은 유통, 저장 기간 동안 제품의 신선함 유지가 요구된다. 본 연구에서는 가공 전 열처리가 fresh-cut muskmelon의 품질에 미치는 영향과 최적 열처리 조건을 조사하였다. Half-cut melon을 대상으로 blanching 온도 설정을 위한 예비 실험을 한 결과 5$0^{\circ}C$ 열처리한 구가 향, 연화 저해 정도, 그리고 전체적인 기호도에 대한 관능평가 가장 우수하였다. 이를 바탕으로 5$0^{\circ}C$의 water bath상에서 whole melon을 10, 20, 30, 40분 blanching하여 5$^{\circ}C$에서 24시간 저장한 후 cork borer를 이용하여 cylinder 형의 fresh-cut melon을 가공하였다. 가공한 melon은 5$^{\circ}C$에서 6일 저장하면서 L-value, chroma-value, soluble solid, pH, 경도, 호흡 변화 등을 통해 품질변화를 측정하였다. 저장 6일후 L-value의 변화는 대조구에서 가장 크게 나타났으며, chroma-value는 저장 시간이 경과함에 따라 감소하였으며 10분 열처리 한 구에서 변화정도가 가장 낮게 나타났다. 수용성 고형분 함량은 저장기간의 경과에 따른 큰 변화는 없었으나 40분 열처리한 구에서 수용성 고형분 함량이 가장 낮았으며 20, 30분 열처리한 구에서 높게 나타났다. 저장 중 fresh-cut melon의 pH는 증가하는 경향을 보였으며 10분 열처리한 구에서 가장 낮게 나타났다. 호흡변화는 저장 기간이 경과함에 따라 $O_2$는 감소하고 $CO_2$는 증가했으며 특히 20분 열처리한 구에서 $CO_2$가 크게 증가한 것으로 나타났다. 증가 정도가 가장 크게 나타났다. 열처리한 fresh-cut melon의 hardness는 저장 3일 후 대조구와 40분 열처리 구에서 가장 낮아 연화현상을 확인했으며 20분 열처리구에서 초기 hardness가 유지되는 것으로 확인했다. 따라서 fresh-cut melon을 위한 가공 전 열처리를 위해서는 5$0^{\circ}C$에서 10분 열처리가 품질 변화를 유지하는데 적당하다고 판단된다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.12 no.1
• /
• pp.28-36
• /
• 1988

Since the oil shocks of 1970s, the quality of the fuel oil for marine diesel engines has become more degarded than ever. When the poorer quality fuel is burned, carbon residues of the fuel oil cause blockage of the fuel injection valve nozzle and troubles of fuel injection system. The mis-firing of engine occurs due to the decrease of fuel quantity injected, the decrease of compression pressure in the slow speed range, the increase of fuel leaked and the high ignition temperature of degraded fuel etc. This paper is to investigate theoretically the effects of mis-firing on the crankshaft axial vibration of diesel engine. The cylinder pressure in operation is calculated by the computer aided simulation of closed cycle for a large two-stroke diesel engine and also the exciting force of axial vibration and the resonance amplitudes are calculated. And then, the condition of normal state, misfiring and one-cylinder cut-off operation are analyzed. The results of calculations show good agreements with those of the actual measurements.

• Journal of the Korean Institute of Gas
• /
• v.19 no.6
• /
• pp.80-84
• /
• 2015

In this paper, the valves for a LPG gas cylinder have been investigated on the body height and weight by comparing design data between typical automatic shut-off vertical and newly developed horizontal valves. The height of an automatic shut-off horizontal valve is radically reduced by 41~42% compared with that of a typical automatic shut-off vertical valve. And, the body weight of a horizontal valve is also reduced by 29~40% compared with that of a vertical shut-off valve. This result is just achieved by a structural design modification from typical vertical valve to horizontal arrangement of various valve components.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.04a
• /
• pp.116-120
• /
• 2009

A two-dimensional unsteady inviscid flow solver has been developed for the simulation of complex geometric configurations on adaptive Cartesian meshes. Embedded condition was used for boundary condition and a predictor-corrector explicit time marching scheme was used for time-accurate numerical simulation. The Cartesian mesh generator, which was previously developed for steady problem, was used grid generation for unsteady flow. The solver was based on ALE formulation for body motion. For diminishing the effects of cut-cells, the cell merging method was used. Using cell merging method, it was eliminated the CFL constraints. The conservation problem, which is caused cell-type variation around region swept by solid boundary, was also solved using cell merging method. The results are presented for 2D circular cylinder and missile launching problem.

• Proceedings of the Safety Management and Science Conference
• /
• 2004.11a
• /
• pp.53-60
• /
• 2004

본 연구에서는 현재 일반가정이나 영업소에서 사용중인 액화석유가스 용기용밸브의 문제점을 제시하고, L.P 가스사고를 예방할 수 있는 LPG용 과류밸브의 과류차단장치를 개발${\cdot}$제작함에 있어 고압가스 안전관리기준 통합고시 ${\lceil}$제12장 4절 과류차단형 액화석유가스 용기용밸브${\rfloor}$에서 규정한 과류차단 성능시험을 실시하는데 필요한 여러 가지 변수를 선정하여 차단장치의 형상에 따른 최적의 차단 유량 범위를 찾고자 실험을 실시하였으며, 보다 궁극적으로는 일반 용기용밸브가 가진 문제점을 조속히 해결하고 진정한 의미의 안전밸브를 개발하는데 목적이 있다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.5
• /
• pp.640-650
• /
• 1998

Pumping performances of a helical molecular drag dump(MDP) and of a radial MDPs are numerically analyzed by using the direct simulation Monte Carlo (DSMC) method. A helical- and radial-MDP have rotating pumping channels cut on a cylinder and on a disk, respectively. For a helical MDP, the present results agree quantitatively with the previously known numerical results. For radial MDPs, both of the Type 1 (having pumping channels cut on the stationary disk) and of the Type 2 (having pumping channels cut on the rotating disk) are analyzed to predict their performances for various parameters, i.e., the radius of curvature center of the channel wall, the depth of the channel, the clearance between housing and disk, and the rotating speed. The results show that the performance of the Type 2 is superior to that of the Type 1, and that for all types the pumping efficiency decreases as the clearance increases. Also, the radial type MDP has larger leakage losses in the direction of pumping channel than does the helical one.

• Restorative Dentistry and Endodontics
• /
• v.6 no.1
• /
• pp.115-122
• /
• 1980

The corrosion of silver amalgam is regarded as one of major causes in the failures of dental amalgam restorations. To evaluate the corrosion resistance of dental amalgam alloys, electrochemical tests such as potential and polarization measurement were used widely. But these commonly used methods have not provided the sufficient informations on relative resistance of amalgam to corrosion. In this experiment, the corrosion currents were measured using electronic potentiostat to compare some commercial dental amalgam alloys. All alloys were triturated in a amalgamator and condensed into a mold described in A.D.A. Specification No. 1 to produce cylinder form specimens of 4mm diameter by 5mm long. After specimen kept for 1 week at $37^{\circ}C$, each specimen was embedded in epoxy resin. The surfaces of specimens were then polished with a emery paper, diamond dust, and $Al_2O_3$. These specimens were immersed in artifical saliva kept at $37^{\circ}C$, and currents of each specimen were measured for 24 hours at 0.0volt (SCE). The author obtained conclusions as follows: 1. High copper amalgam showed superior resistance against corrosion to conventional amalgam, but a pellet form of high copper amalgam seemed to be susceptible to corrosion. 2. In lathe-cut alloys, fine-cut had superior resistance against corrosion to regular-cut. 3. Non-zinc conventional amalgam alloys were more resistant to corrosion than that of zinc containing conventional amalgam alloys. 4. In both of high copper and conventional amalgams, predispensed forms tended to have better resisitance to corrosion than that of pellet forms.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.10a
• /
• pp.58-63
• /
• 1996

A study is drawn up its result's tables and graphs by measuring tools(outside micrometer cylinder gauge and dial caliper gauge) on the difference of diameter volumes from before-discharge and after-discharge under 52 Kind's experimental condition by cupper and graphite electrode of CNC EDM. The EDM is attached with A.V.R. and memory scope for keep up accuracy and the fixed table of work piece is used in order to eliminate the noise by the internal resistance of it and forcing to eradicate the discharge liquid. It is analyzed cutting conditions to compare its wave value and pulse time.(Ton Toff) through voltage and current for decreasing working error.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.553-558
• /
• 2015

교량의 주탑, 초고층빌딩과 같이 세장비가 큰 대형구조물의 경우 풍하중에 취약한 특성을 지니고 있어서 바람에 의해 직각 방향으로 발산 진동하는 갤로핑(galloping) 현상이 발생하게 된다. 구조물의 진동을 억제하려는 방안으로 단면 형상에 변화를 주어 공기역학적 불안정성을 감소시키는 방법이 사용되고 있다. 본 논문에서는 Edison_CFD를 이용하여 모서리 절단부의 비율과 받음각에 따른 공기력 특성에 대한 전산해석을 수행하였다.