• Journal of the Korean Solar Energy Society
• /
• v.30 no.5
• /
• pp.63-68
• /
• 2010

To guarantee life time more than 20 years for manufacturer without stopping photovoltaic(PV) system, it is really important to test the module in realistic time and condition compared to outside weather. In here, we tested PV modules in highly stressed condition compared to IEC standards. In IEC 61215 and IEC 61646 standards, damp-heat, thermal cycle(TC200) and mechanical test are main test items for evaluating long-term durability of PV module in controlled temperature and humidity condition. So in this paper, we have lengthened the test time for TC200 and damp-heat test and increased the loading stress on surface of module. Through this test, we can get some clue of proper the method for measuring realistic life cycle of PV modules and suggested the minimum time for PV test method. The detail description is specified as the following paper.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.18 no.1
• /
• pp.47-52
• /
• 2013

Despite the usefulness of nitrogen isotope tracer experiments in nitrogen cycling studies, there are not such many measurement data mainly due to the difficulties in analytical methods. Although Gardner et al. (1996) developed a relatively simple and accurate method that can measure ammonium isotope using HPLC and used it widely in various N dynamics studies, the technique was not adopted to other laboratories. An HPLC-RTS system using updated HPLC pumps that can perform the same measurements as that of Gardner et al. (1996) was built. The result of standard sample showed linear increase of RTS with the $^{15}N$ proportions. Centroid retention times calculated with Matlab$^{(R)}$ program enhanced the linearity of the response. In a sea water incubation experiment spiked with $^{15}NH_4{^+}$, the uptake and regeneration of ammonium could be separately estimated using the temporal change of $^{15}N/^{14}N$.

• Journal of Korean Academy of Nursing
• /
• v.33 no.6
• /
• pp.743-752
• /
• 2003

Purpose: This study was conducted to combine the effects of pulmonary rehabilitation program (PRP) on exercise capacity/tolerance and general health status of COPD patients based on the primary research results examined the effects of PRP, Method: Seventeen studies were selected by the sampling criteria established to include the studies that reported enough statistics necessary to conduct meta-analysis. Result: According to the study results, the most effective indicators for exercise capacity/tolerance were exercise time (such as cycling time or treadmill walking time) and ground walking distance within given time (6 minutes or 12 minutes), whereas effects on such indicators as VE and VO$_2$ were not statistically significant. PRP induced significant effect on patients' general health status, frequently measured by physical, psycho-emotional, and holistic indicators, the enhancement on psycho-emotional dimension resulted from PRP was more prominent than those of the other dimensions. From the results, it was noted that the place where PRP was given and the contents of PRP exercised their influence on the outcome variables. Which body part was trained was also one of the important factors that influence on the patients' perception of dyspnea during exercise as well as on exercise capacity/tolerance. Conclusion: PRP including exercise training significantly improved the exercise capacity and general health status of COPD patients.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.2
• /
• pp.59-64
• /
• 2008

D. W. KANG, J. S. CHOI, and G. R. TACK, A Study on Real-Time Sports Activity Classification & Monitoring Using a Tri-axial Accelerometer. Korean Jouranl of Sport Biomechanics, Vol. 18, No. 2, pp. 59-64, 2008. This study was conducted to study the real-time sports activity classification and monitoring using single waist mounted tri-axial accelerometer. This monitoring system detects events of sports activities such as walking, running, cycling, transitions between movements, resting and emergency event of falls. Accelerometer module was developed small and easily attachable on waist using wireless communication system which does not constrain sports activities. The sensor signal was transferred to PC and each movement pattern was classified using the developed algorithm in real-time environment. To evaluate proposed algorithm, experiment was performed with several sports activities such as walking, running, cycling movement for 100sec each and falls, transition movements(sit to stand, lie to stand, stand to sit, lie to sit, stand to lie and sit to lie) for 20 times each with 5 healthy subjects. The results showed that successful detection rate of the system for all activities was 95.4%. In this study, through sports activity monitoring. it was possible to classify accurate sports activities and to notify emergency event such as falls. For further study, the accurate energy consumption algorithm for each sports activity is under development.

• Journal of the Korean Electrochemical Society
• /
• v.18 no.4
• /
• pp.161-171
• /
• 2015

High-yield zinc germanium oxide ($Zn_2GeO_4$) and zinc tin oxide ($Zn_2SnO_4$) nanowires were synthesized using a hydrothermal method. We investigated the electrochemical properties of these $Zn_2GeO_4$ and $Zn_2SnO_4$ nanowires as anode materials of lithium ion battery and sodium ion battery. The $Zn_2GeO_4$ and $Zn_2SnO_4$ nanowires showed excellent cycling performance of the lithium ion battery, with a maximum capacity of 1021 mAh/g and 692 mAh/g after 50 cycles, respectively, with a high Coulomb efficiency of 98 %. For the first time, we examined the cycling performance of $Zn_2GeO_4$ and $Zn_2SnO_4$ nanowires for sodium ion batteries. The maximum capacity is 168 mAh/g and 200 mAh/g after 50 cycles, respectively, with a high Coulomb efficiency of 97%. These nanowires are expected as promising electrode materials for the development of high-performance lithium ion batteries as well as sodium ion batteries.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.5
• /
• pp.2661-2665
• /
• 2016

Silibinin is a natural polyphenol with high antioxidant and anticancer properties. In this study, its influence on two of the most commonly employed human breast cancer cell lines, MCF-7 and T47D, and one non-malignant MCF-10A cell line, were investigated and compared. Cell viability, the cell cycle distribution and apoptosis induction were analyzed by MTT and flow cytometry, respectively. The effect of silibinin on PTEN, Bcl-2, P21, and P27 mRNAs expression was also investigated by real-time RT-PCR. It was found that silibinin caused G1 cell cycle arrest in MCF-7 and MCF-10A cells but had no effect on the T47D cell cycle. Silibinin induced cytotoxic and apoptotic effects in T47D cells more than the MCF-7 cells and had no cytotoxic effect in MCF-10A cells under the same conditions. Silibinin upregulated PTEN in MCF-7 and caused slightly increased P21 mRNA expression in T47D cells and slightly increased PTEN and P21 expression in MCF-10A cells. Bcl-2 expression decreased in all of the examined cells under silibinin treatment. P27 mRNA expression upregulated in T47D and MCF-10A cells under silibinin treatment. PTEN mRNA in T47D and P21 and P27 mRNAsin MCF-7 were not affected by silibinin. These results suggest that silibinin has mostly different inhibitory effects in breast cancer cells and might be an effective anticancer agent for some cells linked to influence on cell cycle progression.

• Journal of Pharmaceutical Investigation
• /
• v.33 no.4
• /
• pp.293-298
• /
• 2003

This study was attempted to develop the physicochemical ad morphological stability test methods for the cream and lotion formulations among the cosmetic foundations and to provide the guidance for the stability methods with respect to basic emulsions and creams. With these developed stability test methods, we can evaluate the expired date or life time of the available basic cosmetics, especially basic lotions ad creams. Also, the stability test methods established in this study can be used as a guideline to test physical and morphological stability of cosmetics in the future. Thus, we selected two types of basic cosmetics such as lotions and creams made by four different cosmetic companies ad applied them to the stability test methods depending on the temperature changes such as temperature cycling and freezing-thawing cycling test. After the temperature changes, the conductivity, turbidity, particle size, creaming ratio and pH changes of the creams and lotions were evaluated and morphological changes such as crystal formation, odor, color and feeling of the creams and lotions were also tested. As the results of the stability tests, all the tested creams and lotions except for one lotion were stable. Therefore, it may be concluded that these short-term accelerated stability tests as physical stability test depending on the temperature change study were suitable for the stability testing methods for the basic cosmetics and may be useful for the establishment of the guideline for the stability test of cosmetics.

• Journal of Welding and Joining
• /
• v.33 no.3
• /
• pp.25-31
• /
• 2015

Due to environmental regulations (RoHS, WEEE and ELV) of the European Union, electronics and automotive electronics have to eliminate toxic substance from electronic devices and system. Specifically, reliability issue of lead-free solder joint have an increasing demand for the car electronics caused by ELV banning. The authors prepared engine control unit and cabin electronics soldered with Sn-3.0Ag-0.5Cu (SAC305). To compare with the degradation characteristics of solder joint strength, thermal cycling test (TC), power-thermal cycling test (PTC) and series tests were conducted. Series tests were conducted for TC and PTC combined stress test using the same sample in sequence and continuously. TC test was performed at $-40{\sim}125^{\circ}C$ and soak time 10 min for 1000 cycles. PTC test was applied by pulse power and full function conditions during 100 cycles. Combined stress test was tested in accordance with automotive company standard. Solder joint degradation was observed by optical microscopy and environment scanning electron microscopy (ESEM). In addition, to compare with deterioration of bond strength of quad flat package (QFP) and chip components, we have measured lead pull and shear strength. Based on the series test results, consequently, we have validated of series test method for lifetime and reliability of Pb-free solder joint in automotive electronics.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.1 s.34
• /
• pp.65-71
• /
• 2005

At present, Electronic industries push ahead to eliminate the Pb(Lead) -a hazardous material-from all products. Especially, we have performed to select the optimum standard composition of lead free alloy for the application to products for about 3 years from 2000. These days, we have the chance for applying to the mass-production. This project constructed the system for applying the lead free solders on consumer electronic products, which is one of the major products of the LG Electronics. To select the lead free solders with corresponding to the product features, we have passed through the test and applied with Sn-3.0Ag-0.5Cu alloy system to our products, and for the application to the high melting temperature composition, we secured the thermal resistance of the many parts and substrate and optimized the processing conditions. We have operated the temperature cycling test and the high temperature storage test under the standards to confirm the reliability of the products. On these samples, we considered the consequence of our decision by the operating test. For the long life time of the product, we have operated the temperature cycling test at $-45^{\circ}C\;-\;+125^{\circ}C$, 1 cycle/hour, 1000 cycles. Also we have tested the tin whisker growth about lead free plating on lead finish. We have analyzed with the SEM, EDS and any other equipment for confirming the failure mode at the joint and the tin whisker growth on lead free finish.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.1
• /
• pp.180-186
• /
• 2017

In this paper we propose a traffic aware Demand Wakeup MAC(TADW-MAC) protocol, in which low data delay and high throughput can be achieved, for wireless sensor networks. With the TADW-MAC protocol, the problem of the DW-MAC protocol, which schedules only one packet to deliver during the Sleep period in a multi-hop transmission is resolved. DW-MAC is not adequate for the applications such as object tracking and fire detection, in which busty data should be transmitted in a limited time when an event occurs [6-8]. When an event occurs, duty cycle can be adjusted in the TADW-MAC protocol to get less energy consumption and low latency. The duty cycle mechanism has been widely used to save energy consumption of sensor node due to idle listening in wireless sensor networks. But additional delay in packet transmission may be increased in the mechanism. Our simulation results show that TADW-MAC outperforms RMAC and DW-MAC in terms of energy efficiency while achieving low latency.