• Journal of the Korean Mathematical Society
• /
• v.55 no.4
• /
• pp.987-1004
• /
• 2018

In this paper, we get several centroaffine invariant properties for a ruled surface in ${\mathbb{R}}^4$ with centroaffine theories of codimension two. Then by solving certain partial differential equations and studying a centroaffine surface with some centroaffine invariant properties in ${\mathbb{R}}^4$, we obtain such a surface is centroaffinely equivalent to a ruled surface or one of the flat centered cyclic surfaces. Furthermore, some centroaffine invariant properties for centered cyclic surfaces are considered.

• Steel and Composite Structures
• /
• v.21 no.3
• /
• pp.517-536
• /
• 2016

Thick steel plate is commonly found with mega steel structures but its properties have not been fully explored. Grade Q345GJ-C steel plate with thickness ranging from 60 mm to 120 mm are studied in this paper. Both the static and cyclic performance of material in different directions (horizontal and through-thickness directions) and locations (outer surface, 1/4 thickness and mid-depth) are experimentally obtained. The accumulative damage during cyclic loading is also calculated by using bilinear mixed hardening (BMH) constitutive relationship together with the Lemaitre's damage model. Results show that the static properties are better at the outer surface of thick steel plates than those at mid-depth. Properties in through-thickness direction are similar to those at mid-depth in the horizontal direction. The cyclic performance at different locations of a given plate is similar within the range of strain amplitude studied. However, when damage parameters identified from monotonic tensile tests are included in the numerical simulation of cyclic loading tests, damage is found accumulating faster at mid-depth than close to outer surface.

• Journal of the Korean Society of Tobacco Science
• /
• v.20 no.1
• /
• pp.19-25
• /
• 1998

The bulk curing experiment to the improve the quality of flue-cured leaves were carried out to evaluate relationship between cyclic curing and conventional curing method. We studied the effect of the cyclic change of wet bulb temperature at the yellowing stage of flue curing on chemical properties of cured leaves. The wet bulb temperature was automatically controlled between preset high($38^{\circ}C$) and low point ($35^{\circ}C$) everyone hour cyclically during 12 hours after starting luring. As a result, the acceleration of the increase in the chemical properties of cured leaves were observed. As to the chemical properties, there was decreased in citric acid, increased in malic acid of the nonvolatile organic acids and all higher fatty acids content of leaves cured by this method compared with in that of conventional curing method, while a major chemical compounds in relation to aromatic essence of cigarette smoke in essential oil components of lured leaves was mostly higher in this method than those of conventional ones, and it was evaluated that there was decreased in CO, TPM, Tar, and $CO_2$ content of the cigarette smoke comparing to the conventional luring method.

• Journal of applied mathematics & informatics
• /
• v.16 no.1_2
• /
• pp.595-604
• /
• 2004

In this paper We shall give some characterizations for mX＊ derived from the relationships between S(m) and C(m). Also we shall discuss the minimal, maximal, strongly cyclic and minmaxCR-automata. There is an interesting part for the relationship between mX＊ and S(m). That is to say, that mX＊ is minimal has the same meaning as S(m) is strongly cyclic. We shall note that the minimality implies ‘ strongly cyclic’ and ‘strongly cyclic’ implies ‘cyclic’ and ‘cyclic’ implies ‘a MaxCR-automaton’.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.30 no.1
• /
• pp.29-43
• /
• 1998

This study was to investigate the effect of .compressive load and cyclic humidity(2$0^{\circ}C$, 65% and 90% RH) on the physical and mechanical properties of corrugated board. Corrugated boards in the study were under compressive load and under cyclic humidity, and their properties were compared to those without load. Results were summarized as follows ; 1 Statistically significant correlation was shown between the ring crush of the boards and the compressive strength of cylinder specimen made from the boards. So we could study the compressive behavior of board with cylinder specimen. 2. The boards under the compressive load increased their moisture content and thickness much more than those without load both in constant and in cyclic RH. 3. The compressive and tensile strength of board samples were inversely and closely proportional to the sheet moisture content regardless of their load and humidity history. 4. The moisture content did not show any significant proportionality to the change of burst strength of boards within this experiment. 5. Board reconditioning in standard condition led to the recovery of the strength loss that had occurred under various load and humidity condition. 6. The handsheets prepared from the boards that had experienced compressive load and cyclic humidity, and those with no-load and 65% RH did not show any significant difference in strength properties. No physical damage or load-carrying properties of the wood fiber were observed by the compressive load and cyclic humidity history.

• Korean Journal of Mathematics
• /
• v.28 no.3
• /
• pp.421-438
• /
• 2020

In this paper we enumerate all commutative single power cyclic hypergroups of order 4 and period 2. Moreover, we prove some interesting properties regarding cyclic hypergroups.

• Food Science and Biotechnology
• /
• v.16 no.4
• /
• pp.520-525
• /
• 2007

The physicochemical properties of sun-dried and cyclic freeze-thaw dried Alaska pollack were analyzed to compare the 2 drying processes. The moisture content and water activity of sun-dried Alaska pollack were higher than cyclic freeze-thaw dried and 1 year-aged cyclic freeze-thaw dried Alaska pollack (hwangtae). The relatively low temperatures used in cyclic freeze-thaw drying retards lipid oxidation compared to sun drying based on the acid and peroxide values, and the levels of thiobarbituric acid-reactive substances (TBARS) in the dried fish. The water holding capacity of cyclic freeze-thaw dried Alaska pollack aged for 1 year (hwangtae) under ambient conditions at the drying location was higher than that of sun-dried Alaska pollack. The swelling of myofibrilar filaments during cyclic freeze-thaw drying may be responsible for the softening of the dried muscle protein. Aging the cyclic freeze-thaw dried Alaska pollack for 1 year contributed to an increased yellowish color of the hwangtae.

• Journal of the Korean Society of Tobacco Science
• /
• v.20 no.1
• /
• pp.13-18
• /
• 1998

In the flue curing process, the wet bulb temperature is usually controlled at a constant level. To improve the quality of flue cured leaves, we studied the effect of the cyclic change of wet bulb temperature at the yellowing stage of flue curing on physical properties of cured leaves. The wet bulb temperature was automatically controlled between preset high (38℃) and low point (35℃) every one hour cyclically. As a result, the acceleration of the increase in the physical properties of cured leaves were observed. The leaves cured by this method were more or less orange in color, better bodied, and less brittle compared with the leaves produced by conventional curing. However, the leaves cured by this method had a little sharpness and harshness. As to the physical properties, there was decreased in occurrence of flat leaves than that of conventional ones. On the other hand, in case of cyclic curing method, increase of price per kg reached to 2-3% compared with those of conventional ones.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.617-620
• /
• 1999

The purpose of this study is to find the influence of interface and confinement on bond between reinforcing steel and concrete subjected to monotonic and cyclic loading. The key variables for the experimental program include rib height, rib spacing for reinforcing bars and confinement. From the results obtained in this study, the following main observations can be made for the bond properties. Bond strength increases when confinement increases under monotonic and cyclic loading. Bond stiffness and strength drop remarkably after the maximum bond strength. Both bond stiffness and strength also drop at a constant slip when the number of cyclic loading increase. The bond resistance subjected to cyclic loading decreases significantly for reinforcing bars with low rib height.

• Journal of the Korean Ceramic Society
• /
• v.31 no.8
• /
• pp.829-834
• /
• 1994

The aim of this study is to investigate the changes in dielectric properties, Young's modulus and remnant compressive strength with compressive cyclic loading in PZT of tetragonal, MPB and rhombohedral composition. Higher relative dielectric constants appeared in the poled condition than the unpoled condition for all the compositions. After poling treatment remarkably higher relative dielectric constants were observed particularly in MPB, tetragonal compositions. Until five percent of the expected fatigue life was exhausted, the dielectric constant increased with compressive cyclic stress in MPB and rhombohedral while it remained nearly constant in tetragonal. During the subsequent compressive cyclic stress, dielectric constant decreased in all the three compositions. As the compressive cyclic stress is applied the change of Young's modulus was coincided with the change of remnant compressive strength.