• Journal of the Korean Electrochemical Society
• /
• v.3 no.2
• /
• pp.90-95
• /
• 2000

Cycle life test was carried out to evaluate the failure modes of the gel type nth batteries at $C_5$ currents and $100\%$ DOD. When the batteries were charged at constant voltage of 2.40 V and 2.50 Vi respectively, cycle lift was over 1,000 cycles. The batteries lost 426.4 g and 391.2 g of electrolyte far each case after the weight measurement. The battery charged at 2.50 V was shown to have a better cyclic performance than charged at 2.40 V, and the amounts of electrolyte loss was proportional to charge factor. After cycle test, the micro-structure of positive active material was completely changed and the corrosion layer of positive grid was about $50{\mu}m$. Failure mode of the positive plate of the gel type battery was a shedding of the positive active material, and the cause of discharge capacity decrease was found to be a electrolyte loss.

• Korean Journal of Materials Research
• /
• v.21 no.2
• /
• pp.89-94
• /
• 2011

In this work, fabrication and electrochemical analysis of an individual multi-walled carbon nanotube (MWNT) electrode are carried out to confirm the applicability of electrochemical sensing. The reactive ion etching (RIE) process is performed to obtain sensitive MWNT electrodes. In order to characterize the electrochemical properties, an individual MWNT is cut by RIE under oxygen atmosphere into two segments with a small gap: one segment is applied to the working electrode and the other is used as a counter electrode. Electrical contacts are provided by nanolithography to the two MWNT electrodes. Dopamine is specially selected as an analytical molecule for electrochemical detection using the MWNT electrode. Using a quasi-Ag/AgCl reference electrode, which was fabricated by us, the nanoelectrodes are subjected to cyclic voltammetry inside a $2{\mu}L$ droplet of dopamine solution. In the experiment, RIE power is found to be a more effective parameter to cut an individual MWNT and to generate "broken" open state, which shows good electrochemical performance, at the end of the MWNT segments. It is found that the pico-molar level concentration of analytical molecules can be determined by an MWNT electrode. We believe that the MWNT electrode fabricated and treated by RIE has the potential for use in high-sensitivity electrochemical measurement and that the proposed scheme can contribute to device miniaturization.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.9
• /
• pp.582-588
• /
• 2014

3 mol% Co-added $Ni(OH)_2$ fine powders, which showed ${\beta}$-phase, as positive electrode materials have been fabricated using $NiSO_4{\cdot}6H_2O$ aqueous solution by ultrasonic spray-chemical precipitation and subsequent hydrothermal method, and sheet-like Ni nanopowder was fabricated by mechano-chemical reduction method. The addition effects of the sheet-like Ni nanopowder on the electrochemical properties of the positive electrode in Ni-Zn Redox flow battery were investigated. Impedance spectroscopy revealed that the addition of the sheet-like Ni nanopowder resulted in decrease in the electrical resistivity; 10 wt.% addition reduced the electrical properties by a fifth. Cyclic voltammetry showed the addition of the sheet-like Ni nanopowder resulted in decrease in the potential difference of oxidation and reduction; this means the increase in the reversability for electrode reduction. Charge/discharge measurement confirmed that the addition of the sheet-like Ni nanopowder resulted in the increase in the discharge efficiency.

• Ocean and Polar Research
• /
• v.39 no.4
• /
• pp.257-267
• /
• 2017

Although Pacific mackerel (Scomber japonicus) is an important commercial species in Korea, its recruitment mechanism remains largely unknown. Diel vertical positioning of larvae in the water column, which is affected by their specific gravity and the surrounding water density, may help to provide an understanding on recruitment success through predator avoidance and prey availability. The specific gravity measurement on Pacific mackerel eggs and larvae would seem to be essential information necessary to learn about the transport process from spawning to nursery grounds, and consequently the recruitment success. Eggs were artificially fertilized, and larvae were fed with rotifer when their mouths opened 3-4 days after hatching. We conducted the experiment using a density gradient water column to measure the ontogenetic changes in specific gravity from fertilization to 10 days after hatching. Egg specific gravity was stable during most of the embryonic period, but a sudden increase to $1.0249g\;cm^{-3}$ happened just before hatching. However, the specific gravity of newly hatched larvae was much lighter ($1.0195g\;cm^{-3}$), and specific gravity tended to increase continuously after hatching. Comparison of specific gravity with seawater density reveals that eggs and newly hatched larvae can float in the surface layer of the ocean. For the later period of the experiment, the specific gravity showed a cyclic diel pattern: the highest in the evening while the lowest at dawn. The fullness of larval stomach may be responsible for the observed differences in specific gravity, because stomach fullness was lower (40-60%) at midnight, and higher (80-85%) in evening. The diel pattern of specific gravity might provide clues regarding how larvae match the diel vertical migration of prey organisms.

• Journal of the Korean Applied Science and Technology
• /
• v.17 no.2
• /
• pp.120-125
• /
• 2000

The tfTZ(4,4',4''-trifluoro-triazine) was used as a hole blocking material for the electroluminescent devices(ELDs) in this study. In general, the holes are outnumbered the electrons in hole transport and emitting layers because the hole transport is more efficient in most organic ELDs. The hole blocking layer are expected to control the excess holes to increase the recombination of holes and electrons and to decrease current density. The former study using the 2,4,6-triphenyl-1,3,5-triazine(TTA) as hole blocking layer showed that the TTA did not form stable films with vapor deposition technique. The tfTZ can generate stable evaporated films, moreover the fluorine group can lower the highest occupied molecular orbital(HOMO) level, which produces the energy barrier for the holes. The tfTZ has high electron affinities according to the data by the Cyclic-Voltammety(CV) method, which is developed for the measurement of HOMO and lowest occupied molecular orbital(LUMO) level of organic thin films. The lowered HOMO level is made the tfTZ to be applied for a hole blocking layer in ELDs. We fabricated multilayer ELDs with a structure of ITO/hole blocking layer(HBL)/hole transporting layer(HTL)/emitting layer/electrode. The hole blocking properties of this devices is confirmed from the lowered current density values compared with that without hole blocking layer.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.3
• /
• pp.337-346
• /
• 2011

24-hr integrated measurements of water-soluble organic carbon (WSOC) in PM2.5 were made between May 5 and September 25, 2010, on a six-day interval basis, at the Metropolitan Area Air Pollution Monitoring Supersite. A macro-porous XAD7HP resin was used to separate hydrophilic and hydrophobic WSOC. Compounds that penetrate the XAD7HP column are referred to hydrophilic WSOC, while those retained by the column are defined as hydrophobic WSOC. Laboratory calibrations using organic standards suggest that hydrophilic WSOC includes lowmolecular aliphatic dicarboxylic acids and carbonyls with less than 4 or 5 carbons, amines, and saccharides. While the hydrophobic WSOC is composed of compounds of aliphatic dicarboxylic acids with carbon numbers larger than 4~5, phenols, aromatic acids, cyclic acid, and humic-like Suwannee River fulvic acid. Over the entire study period, total WSOC accounted for on average 48% of OC, ranging from 32 to 65%, and hydrophilic WSOC accounted for on average 30.5% (9.3~66.7%) of the total WSOC. Based on the previous results, our measurement result suggests that significant amounts of hydrophobic WSOC during the study period were probably from primary combustion sources. However, on June 9 when 1-hr highest ozone concentration of 130 ppb was observed, WSOC to OC was 0.61, driven by increases in the hydrophilic WSOC. This result also suggests that processes, such as secondary organic aerosol formation, produce significant levels of hydrophilic WSOC compounds that add substantially to the fine particle fraction of the organic aerosol.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.6
• /
• pp.744-752
• /
• 2007

Recently a fuel oil of the diesel engine in the ship is being changed with low quality as the oil price is higher more and more. Therefore the wear and corrosion in all parts of the engine like cylinder liner ring groove of piston crown, spindle and seat ring of exhaust valve are increased with using of heavy oil of low quality In particular the degree of wear and corrosion in between valve spindle and seat ring are more serious compared to the other parts of the engine due to operating in severe environment such as the high temperature of exhaust gas and repeating impact. Thus the repair weld to the valve spindle and seat ring is a unique method to prolong the life of the exhaust valve in an economical point of view In this study. corrosion property of both weld metal zone and base metal was investigated with some electrochemical methods such as measurement of corrosion potential, cathodic and anodic polarization curves, cyclic voltammogram and polarization resistance etc. in 5% $H_2SO_4$ solution. in the case of being welded with some welding methods and welding materials to the exhaust valve specimen as the base metal. In all cases. the values of hardness of the weld metal zone were more high than that of the base metal. And their corrosion resistance were also superior to the base metal. The weld metal of A2F(AC SMAW: 2 pass welding with foreign electrode) showed a relatively good results to the corrosion resistance as well as the hardness compared to the ether welding methods and welding materials. Moreover it indicated that hardness of the weld metal by the domestic electrode was considerably high compared to that of the foreign electrode.

• Applied Chemistry for Engineering
• /
• v.29 no.5
• /
• pp.519-523
• /
• 2018

Cyclodextrins are a class of oligosaccharides having an extremely low toxicity, so that they have been used for the formation of host-guest complexes and removal of toxic gases or molecules. In this study, the subtle phenomenon associated with the formation of host-guest complexes between cyclodextrin and toxic molecules (methyl paraben) was experimentally investigated. First, the formation of cyclodextrin-methyl paraben complexes was monitored by UV/Vis spectroscopy as a function of the cyclodextrin concentration. Secondly, the electrochemical measurement was performed with the surface engineered Au electrode having cyclodextrin molecules on the Au substrate. The sensing signal derived from the addition of methyl paraben solution into the Au surface was measured delicately. This study can be informative for future applications such as sensors.

• Journal of the Korean Society for Railway
• /
• v.13 no.4
• /
• pp.447-454
• /
• 2010

The defects of rail head induced by fatigue and deterioration are mainly classified by two types ; one occurred on the surface of rail head the another occurred on the inner rail head. This study performed the surface irregularity measurement of rail head according to the passing tonnage in the urban railway. Also, we carried out microscopic structure test, chemical component test and micro-hardness test for the specimen which is the used rail on metro line by accumulated passing tonnage. As a result of this study, for new rail, it should be performed initial grinding in order to remove 0.3mm of de-carbonized layer. The preventive-cyclic grinding for preventing RCF defects is proposed two options : grinding by the whole line and grinding by specified sections.

• Proceedings of the Ginseng society Conference
• /
• 1993.09a
• /
• pp.40-48
• /
• 1993

Intravenous administration of saponin extracted from the root of Panax ginseng lowered the blood pressure dose-dependently (10-200 mg/kg, B.W) in anesthetized rats. Therefore, experiments were designed to study the hypothesis that the lowering of blood pressure is associated with the release of endothelium-derived relaxing factor and the accumulation of guanosine 3, 5-cyclic monophosphate (cGMP). Rings of thoracic aorta with and without endothelium were suspended for the measurement of isometric tension in organ chamber and the tissue content of cGMP was measured by radioimmunoassay. All experiments were performed in the presence of $indomethacin(10^{-5}M).$ Ginseng saponin $(10^{-5}-3{\times}10^{-6}g/ml)$ relaxed contractions induced by phenylephrine $10^{-6}M)$ in the aorta with endothelium but not in that without endothelium. Treatment of aortic rings with $N^G$ monomethyl-L-arginine (L-NMMA, $10^{-4}M$ for 30 min), a competitive inhibitor of nitric oxide synthase, and methylene blue $(MB,\;3{\times}10^{-7}M$ for 30 min). an inhibitor of soluble guanylate cyclase, diminished the relaxation induced by Ginseng saponin. Ginseng saponin $10^{-4}g/ml$ for 2 min) increased the accumulation of cGMP in rings with endothelium. L-NMMA and MB inhibited the accumulation of cGMP induced by Ginseng saponin. These data suggest that vascular relaxations induced by Ginseng saponin are mediated by release of endothelium-derived relaxing factor and the accumulation of cGMP. The effect of Ginseng saponin on endothelial function in hypercholesterolemic rabbits was examined. In hypercholesterolemic rabbits fed with $2\%$ cholesterol for 8 weeks, relaxation of aortic rings to acetylcholine was impaired. The impaired relaxations of aortic rings in hypercholesterolemic rabbits were improved by dietary supplementation of Ginseng saponin, probably because of an improved release of endothelium - derived relaxing factor.