• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.115-122
• /
• 2010

The importance of the life cycle cost (LCC) analysis for bridges has been recognized over the last decade. However, it is difficult to predict LCC precisely since the costs occurring throughout the service life of the bridge depend on various parameters such as design, construction, maintenance, and environmental conditions. This paper presents a methodology for the optimal life cycle cost design of a bridge. Total LCC for the service life is calculated as the sum of initial cost, damage cost, maintenance cost, repair and rehabilitation cost, user cost, and disposal cost. The optimization method is applied to design of a bridge structure with minimal cost, in which the objective function is set to LCC and constraints are formulated on the basis of Korean Bridge Design Code. Initial cost is calculated based on standard costs of the Korea Construction Price Index and damage cost on damage probabilities to consider the uncertainty of load and resistance. Repair and rehabilitation cost is determined using load carrying capacity curves and user cost includes traffic operation costs and time delay costs. The optimal life cycle cost design of a bridge is performed and the effects of parameters are investigated.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.6
• /
• pp.25-40
• /
• 2015

Korean tourist areas are designated/managed in accordance with the Tourism Promotion Act. Since Taejongdae was designated as a tourist area in 1969, a total of 230 tourist areas have been designated/built/operated. It has been 46 years since the first tourist area was designated. According to the Tourism Area Life Cycle by Butler, it is estimated that the flow of the life cycle will be reflected in ups and downs over time. Thus, this study aimed to provide basic data for suggesting the direction of changes and development of the future tourist areas after analyzing the life cycle stage of domestic tourist areas, by applying the Tourism Area Life Cycle by Butler. The research method was based on the tourist areas by year, the number of visitors, and data of the target to derive the change transition curve, obtained by dividing the life cycle stages of the tourist areas based on the visitor rate of change. In the analysis results, more than 1/3 of domestic tourist areas are reaching the stagnation/decline stage, and tourist areas such as hot springs and seaside/beach resources show a particularly high ratio of stagnation/decline. The tourist areas that already have reached the stagnation/decline stage will need to analyze the causes for the decline, seek for resolution measures, and introduce new innovative elements. Even though the results of this study are not sufficient to be used as an absolute standard to decide the life cycle stage of domestic tourist areas, it is considered to be adequate for phenomenologically understanding the life cycle stage of Korean tourist areas. Based on this study, the causes for the stagnation/decline of tourist areas can be revealed while it can be also used as basic research to establish revitalization measures for tourist areas by introducing new innovation.

• Archives of design research
• /
• v.18 no.3 s.61
• /
• pp.139-148
• /
• 2005

Generally, the brand has its life cycle as the product has. This life cycle is classified into the stages; introduction, growth, maturity and decline. Since the brand is little different from that of the product's, we can find some differences when it applies to the brand. The most effective method to perceive the brand to the consumers is advertisement, therefore in the advertisement design, it is important to figure out the current stage in the brand life cycle and use the most ideal design strategy in that stage. This study suggests the concept of the brand life cycle and the most effective strategy in each stages of the advertisement design. In the stage of the brand introduction, we apply the 'What is it? Strategy' which introduces the brand itself. In the stage of the growth, 'How does it Differ from? Strategy' is suggested as the advertisement strategy emphasizing the positioning which shows its differential competitive advantages among brands because in this stage there are many competitive brands in the market. In the stage of the maturity, we focus on the 'What does it Convey of? Strategy' stressing on the delivery of brand's value to consumers as consumers they purchase the brand. Finally in the stage of the decline, 'What does it Stand for? Strategy' is suggested in order to emphasize the generation of brand's symbolical meaning rather than to emphasize it's attributes or benefits. Therefore the advertisement design needs the contingent ideal design strategy according to the stages of brand life cycle and the effective brand management through it.

• Smart Media Journal
• /
• v.12 no.5
• /
• pp.111-121
• /
• 2023

The purpose of this study is to find methods for logo renewal design according to the brand life cycle, considering the logo as an important visual tool that represents the brand identity in terms of brand management. This study was conducted through literature study on brand life cycle and brand renewal strategy, an expert survey on logo renewal design, and logo analysis of 35 food and beverage brands with statistical data to determine brand life cycle. The results of the study are three. First, the four stages(introduction, growth, maturity, and decline) of brand life cycle characteristics and renewal strategies were derived. Second, four brand renewal strategies(partial change, total change, repositioning, new image creation) and methods for logo renewal design were proposed based on the life cycle of the brand. Based on this, renewal characteristics for each life cycle were proposed. Third, visual elements of identity that are important depending on the brand life cycle and brand renewal strategy were found. It was found that the addition and subtraction of graphic elements and change of color tone are important in the partial change strategy of the growth period and maturity period, and that the change of signature color is important in the repositioning strategy and the creation of the new image.

• Culinary science and hospitality research
• /
• v.2
• /
• pp.59-87
• /
• 1996

This study has been done by giving the guide when development of menu or doing marketing strategy in Hotel Restaurant. All products and service has a regular course from induction in market to disappear, so it shall be come out Products Life Cycle theory. In eating business, under the tendency and existing cycle to change menu by taste of customers, liking variation, change of periodic status (environment), MLC(Menu Life Cycle) shall be advised by application PLC(Products Life Cycle) in the process of induction of some menu first and spreading the same business field and then deletion (disappearance) from menu because of no popular. In Emergence Stage, it shall be tried to inform new menu through Cooking Contest, presentation of new menu, free sampling party and others. In Growth Stage, it shall be changed package menu or set menu. In Maturity Stage, it shall be provided complimentary ticket, gift coupon or discount for the customers with some degree of selling record in order to increase using frequency and selling amount after insure new customers. In Decline Stage, it shall be groped for entry underdeveloped country or less advance nation, but there is no possibility to devote in enterprise, it shall be planned substitute menu development in order to withdraw. By inducting MLC concept, it shall be provided the available informations such as“how could some menu be circulate in some restaurant”“Accordingly do strengthen promotion activities or go to low developed area or overseas, or delete it from menuitems and so on”. In the time of decline some menu, it is judged to the time of plan(preparation) of new menu development. In the broad view, when consideration of the concept of menu life cycle, it shall be possible to know which menu is decayed and which menu is developed newly or grown-up, so it shall be provided the important information to estimate the tendency of changing menu and set-up a menu development plan.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.1
• /
• pp.129-135
• /
• 1997

Previous studies has shown that the curve of low-cycle fatigue life was not expressed with the single line subjected to Manson-Coffin's law type and bent to short life in low ${\Delta}{\varepsilon}_p$ region. The main cause of this phenomenon has been considered that the localization of plastic strain in the crack initiation process fosters the crack initiation. In this study, the low-cycle fatigue life was investigated for each specimens omitted crack initiation process and it was found that fatigue life curve in log(${\Delta}{\varepsilon}_p$)-log($N_f$)was bent in low ${\Delta}{\varepsilon}_p$ region as ever. Therefore, the main cause of appearance of knee point in fatigue life curve is not found in the crack initiation process but in the crack propagation process. In the crack propagation process, the localization of the plastic strain in the vicinity of crack tip and the influence of test environment on the crack propagation rate were observed and these inclinations were more remarkable in low ${\Delta}{\varepsilon}_p$ region. Hence, it was concluded that these two phenomena in the crack propagation process were proved to the main cause which accelerates the crack propagation in low ${\Delta}{\varepsilon}_p$ region and bent the fatigue life curve in result.

• International Journal of Precision Engineering and Manufacturing
• /
• v.3 no.2
• /
• pp.78-86
• /
• 2002

In general, X-ray diffraction method detects the changes of crystal lattice under material surface using the angle of diffraction 2$\theta$. This technique which deals with in the presented paper can be applied to a behavior on the slipped band or the micro crack cause to material degradation. The relation between half-value breadth and cycle numbers shows three stages, which consist of rapid decrease in the initial cycle, slight decrease in the middle cycle, and then rapid decrease in the final cycle. The ratio of half-value breadth has a constant value on B/B$\_$0/ - N diagram under the loading condition except early part of fatigue life. The ratio of half-value breadth B/B$\_$0/ - log N$\_$f/ with respect to number of cycle to failure N$\_$f/ has linear behavior on B/B$\_$0/ - log N$\_$f/ diagram. Therefore, the evaluation of fatigue life by the average gradient has much less mean error than the estimation of fatigue life by log B/B$\_$0/ - log N/N$\_$f/ relation.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.467-469
• /
• 2009

In this study, fatigue samples were prepared from cylinder head parts that are actually used in domestic (A) and foreign (B) automobiles; high-temperature, high-cycle, and low-cycle fatigue characteristics were then evaluated and compared. A study on the correlation between the microstructural factor and high temperature fatigue characteristic was attempted. The chemical compositions of the heat resistant aluminum alloys above represented A356 (A) and A319 (B), respectively. The result of the tensile strength test on material B at $250^{\circ}C$ was higher by 30.8MPa compared to material A. On the other hand, elongation was 8.5% higher for material A. At $130{\circ}C$, material B exhibited high fatigue life given high cycle fatigue under high stress, whereas material A showed high fatigue life when stress was lowered. With regard to the low-cycle fatigue result ($250^{\circ}C$) showing higher fatigue life as ductility is increased, material A demonstrated higher fatigue life. Through the observation of the differences in microstructure and the fatigue fracture surface, an attempt to explain the high-temperature fatigue deformation behavior of the materials was made.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.5
• /
• pp.385-389
• /
• 2003

There are four main components of the CMP process: polishing pad, slurry, elastic supporter, and pad conditioner. The polishing pad is an essential component to the reproducibility of polishing uniformity in CMP process. However, the polishing pad in recently using metal CMP raised the several points of high cost caused by the increase of cycle time and the many usage of slurry. It is necessary to develop the novel polishing pad which would lead the cost reduction by the higher pad life-cycle, minimized cycle time and lower slurry usage. The characteristics of polishing pad were studied on the effects of different sets of the Polishing pad, which can be applied to metal chemical mechanical polishing process for global planarization of multilevel interconnection structure. The main purpose of this experiment is cost reduction by the increase of pad life-time, the decrease of cycle time and the lower usage of slurry through the specific hard porous structured pad design. It is confirmed that the novel polishing pad made the slurry usage decrease to 60% as well as the pad life-time increase twice with the 25% improvement of removal rate. The polishing time could be decreased and it also helped the cycle time to diminish. It can be expected that this results will help both the process throughput and the device yield to be improved.

• Journal of the Korean Society of Industry Convergence
• /
• v.15 no.4
• /
• pp.117-124
• /
• 2012

Recent years, many industries acknowledge that environmental substantiality of products must be an essential role and it is one of the major importances for industries to consider the environmental impacts of products at the early stages of product development. This study investigated eco-design parameters and $CO_2-eq$. emissions in each stage of raw material acquisition, manufacturing, transportation, use and disuse in life cycle of touch monitor stand based on Eco-Design. In this study, to fulfill of Eco-Design, the environmental impact assessment of through LCA(Life cycle assessment) was carried out with benchmarking monitor stand and we suggested the direction of new design of touch monitor stand mechanism based on eco-friendly considerations. New design based on LCT(Life Cycle Thinking) showed that the following eco-friendly considerations at the early stage of design to be helpful to reduce GWP(Global Warming Potential) [kg $CO_2-eq$.] in new monitor stand development and it is necessary for Eco-Design process of the product.