• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.525-528
• /
• 2003

The aspherical lens are used as objective lens of optical pickup. The sample product is made before manufacturing the injection mould of lens to examine the design factor. The optimum cutting conditions of the main spindle speed, the depth of cut, the feed rate are found when we cut PMMA and PC lens sample with ultra-precision SPDT. The demanded surface roughness 10 nm Ra. aspherical form error 0.5 ${\mu}{\textrm}{m}$ P-V for aspherical lens of optical data storage device are satisfied for PMMA. but not satisfied for PC.

• International Journal of CAD/CAM
• /
• 제3권1_2호
• /
• pp.1-12
• /
• 2003

When milling concave corners, cutter load increases momentarily and fluctuates severely due to concentration and uneven distribution of material stock. This abrupt change of cutter load produces undesirable machining results such as wavy machined surface and cutter breakage. An important factor for studying cutter load in 2.5D pocket milling is the instantaneous Radial Depth of Cut (RDC). However, previous work on RDC under different corner-cutting conditions is lacking. In this different corner shapes. In our work, we express RDC mathematically in terms of the instantaneous cutter engage angle which is defined as Cutter Swept Angle (CSA). An analytical approach for modeling CSA is explained. Finally, examples are shown to demonstrate that the proposed CSA modeling method can give an accurate prediction of cutter load pattern at cornering cut.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 제6회 학술대회 논문집 일렉트렛트 및 응용기술연구회
• /
• pp.47-51
• /
• 2004

The aspherical lens are used as objective lens of optical pickup. The sample product is made before manufacturing the injection mould of lens to examine the design factor. The optimum cutting conditions of the main spindle speed, the depth of cut, the feed rate are found when we cut PMMA and PC lens sample with ultra-precision SPDT. The demanded surface roughness 10 nm Ra, aspherical form error 0.5 ${\mu}m$ P-V for aspherical lens of optical data storage device are satisfied for PMMA, but not satisfied for PC.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제22권2호
• /
• pp.174-183
• /
• 2000

This study was performed to investigate the characteristics of soft tissue profile of the class III malocclusion and to test the yardstick far differential diagnosis between surgical and orthodontic patients. Initial lateral cephalograms of orthodontic group(30 patients) that have acceptable occlusion and profile by orthodontic treatment alone and surgical group(30 patients) that have favorable occlusion and profile by combined surgical-orthodontic treatment were selected in Ajou university hospital. Powell and Burstone II analysis were made on the tracing. Descriptive, comparative, factor, cluster, and discriminant analysis were carried out with computer program. The results were as followings : 1. Patients who received surgery had a more concave profile and a longer lower facial height than patients who received orthodontic treatment alone. 2. Nasolabial angle, ratio of vertical height, and mentolabial sulcus were significantly different at the 5% level. And facial protuberance, upper lip protuberance, mentocervical angle, nasofrontal angle, nasomental angle, mandibular vertical height, angle between cervix and lower face, ratio of mandibular vertical height divided by cervical depth, ratio of vertical height between upper and lower lip, and maxillary protuberance were significantly different at the 1% level. 3. 8 factors were extracted and factor 2, 3, and 8 showed significant differences by factor analysis. 4. Orthodontic group (25) and surgical group (35) were classified by cluster analysis. 5. Discriminant function was D = 0.079Nasomental angle + 0.081Sn-Gn + 3.343Sn-Gn/C-Gn + 1.734Sn-St/St-Me' -26.460, and cutting score was 0, so we can discriminate that orthodontic group has the score above 0, and surgery group below 0. And 91.7% of original grouped cases were correctly classified.

• 한국기계가공학회지
• /
• 제16권3호
• /
• pp.125-130
• /
• 2017

In this study, the influence of various factors on surface roughness was investigated using the Taguchi experimental method through high-speed machining processing. Feed rate, pitch, tool diameter, and depth of cut are widely applied to high-speed machining conditions for mold production. Each of these factors was implemented and classified into three levels; then, after high speed machining, surface roughness was measured, the S/N ratio was analyzed, and the influence on the surface roughness of control factors was analyzed quantitatively by ANOVA. Using this information, a mathematical model for predicting surface roughness was derived from multiple regression analysis. This mathematical model enables the surface roughness value after high-speed machining to be predicted at the production stage, before machining, for a wide range of machining conditions.

• 한국기계가공학회지
• /
• 제13권4호
• /
• pp.56-68
• /
• 2014

This paper presents an experiment on the modeling, analysis, prediction and optimization of machining parameters used during the turning process of the low-carbon steel known as ST40. The parameters used to develop the model are the cutting speed, the feed rate, and the depth of the cut. The experiments were carried out under various conditions, with three level of parameters and two different treatments for each level (with and without a lubricant), to determine the effects of the parameters on the surface roughness and electric current consumption. These effects were investigated using response surface methodology (RSM). A second-order model is used to predict the values of the surface roughness and the electric current consumption from the results of experiments which collected preliminary data. The results of the experiment and the predictions of the surface roughness and electric current consumption under both treatments were found to be nearly identical. This result shows that the feed rate is the main factor that influences the surface roughness and electric current consumption.

• 한국도로학회논문집
• /
• 제15권2호
• /
• pp.1-9
• /
• 2013

PURPOSES : The PMS(Pavement Management System) has been utilized in order to efficiently allocate the limited budget for the maintenance of national highway system. In the PMS of national highway, surface pavement condition is evaluated by using the VI (Visual Index). However, the VI is determined only by considering the cracking rate (%) and rut depth (mm), which is not reflecting the IRI (International Roughness Index) that is known as an important factor of pavement performance. In this study, the NHPCI (National Highway Pavement Condition Index) which includes the cracking rate (%), rut depth (mm), and IRI (m/km) is suggested for determining the rehabilitation methods group. METHODS : First, the rehabilitation methods performed between 2008 and 2010 on the national highway is classified and then, NHPCI is determined for each rehabilitation method. Next, the NHPCI for each rehabilitation method is grouped through the interval estimation of the population mean and T-test analysis. RESULTS : According to NHPCI range, the rehabilitation methods are divided into four categories: Not Required, Preventive Maintenance, Overlay Treatment (with or without cutting), and Full-scale Treatment (i.e., reconstruction). CONCLUSIONS : Based on this study, it is recommended that the appropriate NHPCI range should be determined through the combination of the rehabilitation categories and Decision Procedure of Pavement Distress Condition Visual Index.

• 지질공학
• /
• 제25권2호
• /
• pp.189-199
• /
• 2015

우리나라의 화강풍화토 지반의 사면붕괴 형태는 대부분 절토사면에서 발생하는 경우가 많고 풍화작용의 영향을 받는 표층부 지반 안정성을 파악하는 것이 중요하다. 표층부에서 채취한 시료를 이용하여 기본 물성시험 및 점착력과 내부마찰각 시험을 수행하였고, 현장조사 결과를 토대로 자연사면의 안정성 검토를 수행여 형태별 패턴(쐐기형, 무한사면형, 유한사면형)을 분류 하였다. 또한 분류된 패턴별로 수치해석을 수행하였으며 그 결과를 토대로 최소안전율과 사면경사각의 관계를 개괄적인 안정도 추정에 기초 자료로서 제공하고자 하였다. 본 연구에서 산정된 강도정수들은 몇 개의 특정사면의 경우에 대한 것으로서 모든 사면의 안정해석에 그대로 적용 가능한 것은 아니다. 그러나 현실적으로 모든 경사면과 강도정수에 대해서 실험을 실시하는 것은 어려울 뿐만 아니라 비용면에서도 불가능한 실정이다. 따라서 사면안정에 영향을 미치는 단위중량, 점착력, 내부마찰각의 변화와 사면 경사각의 변화에 따른 위험도 평가를 정립하기 위해서는 수치모델링과 같은 방법을 사용하여 현장조건의 다양한 변화에 대응할 수 있는 패턴별 위험도 평가기준이 작성된다면 대단히 유용할 것이다. 따라서 대표적인 사면형태(TYPE-I~IV)와 사면경사각에 강도정수를 적용하여 최소 안전율을 제시한다면 자연사면의 간이 안정해석이 가능 할 것으로 사료된다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권14호
• /
• pp.6141-6147
• /
• 2015

Background: Cancer is a leading cause of death worldwide. A large proportion of cancer deaths are preventable through early detection but there are a range of social, emotional, cultural and financial dimensions that hinder the effectiveness of cancer prevention and treatment efforts. Cancer stigma is one such barrier and is increasingly recognized as an important factor influencing health awareness and promotion, and hence, disease prevention and control. The impact and extent of stigma on the cancer early detection and care continuum is poorly understood in India. Objectives: To evaluate cancer awareness and stigma from multiple stakeholder perspectives in North India, including men and women from the general population, health care professionals and educators, and cancer survivors. Materials and Methods: A qualitative study was conducted with in-depth interviews (IDIs) and focus group discussions (FGDs) among 39 individuals over a period of 3 months in 2014. Three groups of participants were chosen purposively - 1) men and women who attended cancer screening camps held by the Indian Cancer Society, Delhi; 2) health care providers and 3) cancer survivors. Results: Most participants were unaware of what cancers are in general, their causes and ways of prevention. Attitudes of families towards cancer patients were observed to be positive and caring. Nevertheless, stigma and its impact emerged as a cross cutting theme across all groups. Cost of treatment, lack of awarenes and beliefs in alternate medicines were identified as some of the major barriers to seeking care. Conclusions: This study suggests a need for spreading awareness, knowledge about cancers and assessing associated impact among the people. Also Future research is recommended to help eradicate stigma from the society and reduce cancer-related stigma in the Indian context.

• 한국의류학회지
• /
• 제39권2호
• /
• pp.190-203
• /
• 2015

The fashion industry has been rearranged by Global SPA brands (like ZARA and H&M), which are powerful retailers that integrate the value chain ranging from manufacturing to sales. SPA brands can offer good quality of clothing at a reasonable price by cutting the margin between the supply chain. They are also called fast fashions since they make expedited efforts to respond to market trends and consumers. Despite the slow growth of the fashion industry in Korea, as global SPA brands rapidly expand market share, traditional fashion companies have launched several SPA brands such as MIXXO and SPAO (E-LAND), 8SECONDS (CHEIL INDUSTRIES). The few academic studies on this subject are focused on the analysis of secondary data such as news and books. The current research is qualitative and empirical attempts to explore the success factor of SPA brands with analysis of 1:1 in-depth interviews with experts who have worked for global SPAs such as Uniqlo, H&M, and ZARA, based on the grounded theory. The main phenomenon was shown to be that global SPA brands were popular since they offer a variety of products with a large assortment at reasonable and cheap prices in a large scale and multifunctional retail store. Most of them displayed main phenomena that can be realized due to the purchasing cycle of clothing that is shorter with consumers' regarding clothing as consumables. Global SPA brands had three types of marketing strategy: sellable product, sales strategy according to consumer response, and multifunctional stores. Each global SPA brand developed marketing strategies based on core competency and national conditions. The three success factors shorten the consumer decision making process of clothing. This study concludes with implications for practitioners of SPA brands born in Korea.