The object of this experiment was to suggest the suitable cutting frequency and cutting height for orchardgrass (0G)-red clover(RC) mixtures under the intensive system of short-term pasture utilization. The fields trials were conducted over 3-year period(1991-1993) to evaluate dry matter yield, botanical composition, chemical composition and CP, DDM yield on the cutting frequency (30, 40 and 50 days) and cutting height(5, 7 and 9cm) With decreasing the cutting frequency, the DM yield of OG in the OG-RC mixtures was significantly increased(P
This experiment was carried out to investigate the effects of endophyte staWendophyte-free and -infect) and cutting frequency(3, 4, 5 and 6 timeslyear) on the forage quality of tall fescue(Festuca crnrtzdit~crcerr Schreb.) at the Experimental Field of Grassland and Forage Crops Division. National Livestock Research Institute, Suweon, from 1993 to 1994. 'Ihe results obtained are summarized as follows: CP content of tall fexue was increased with endophyte-free and cutting frequency for two varieties. Crude protein yield(CPY) of tall fescue in 1993 was increased with endophyte-free and cutting frequency for two varieties(P<0.05). In 1994, however. CPY of endophyte-free tall fescue was slightly lower than that of endophyte-infected tall fescue and the higher CPY was observed when tall fescue was harvested 6 times per year. NDF content of tall fescue was not different between endophyte-infected and -free. NDF was decreased with cutting frequency for two varieties in 1993, however. it was not influenced by the endophyte and cutting frequency in 1994. ADF content of tall fescue was not different between endophyte-infected and -free. and it was decreased with cutting frequency for two varieties. IVDMD was not influenced by endophyte, however, it was increased with cutting frequency for two varieties. Based on the results of this experiment, it is suggested that a slight increase in forage quality could be obtained from endophyte-free tall fescue and the quality was increased with frequent cutting.
예취빈도와 액상구비의 시용수준에 대한 Reed canarygrass의 반응을 조사하여, 잠재생산성의 증대를 위한 경제적이고 합리적인 적정 예취빈도와 액상구비의 시용수준을 추정하고자 하였다. 예취빈도별 연간 건물수량에 대한 예취번초의 상대수량은 3회 예취구에서 2번초, 4회 예취구에서 3번초 및 5회 예취구에서는 4번초에서 다른 예취번초에 비해 가장 높은 상대수량을 나타내었다. 무시용구의 연간 건물수량은 예취빈도에 따라 6.4~7.5 ton/ha의 범위를 나타내었으며, 3회 예취구에서 가장 많은 연간 건물수량을 나타내었다. 액상구비의 시용수준이 증가됨에 따라서 연간 건물수량은 증가되었다. 즉, 3회 예취구에서는 연간 180 kg, 4회 예취구에서는 연간 120 kg 및 5회 예취구에서는 연간 300 kg로 증시하였을 때, 무시용구에 비해 유의하게 높은 건물수량을 나타내었다. 액상구비의 건물생산효율 (kg DM/kg N)은 3회 예취구의 120 kg/ha/cut, 4회 예취구의 30 kg/ha/cut 및 5회 예취구의 90 kg/ha/cut에서 각각 16.8, 25.4 및 10.4 kg 의 가장 높은 건물을 생산하였고, 시용시기에 따른 건물생산효율은 3회 예취구에서 1번초, 4회와 5회 예취구에서는 2번초에서 가장 높았다. 경제적 액상구비의 질소시용수준은 3회 예취구에서 462.7~525.3 kg/ha, 4회 예취구에서 353.1~423.2 kg/ha 그리고 5회 예취구에서 380.1~424.4 kg/ha의 범위를 나타내었다.
The effects of cutting 6equency and nitrogen fertilization on feed values of reed canarygrass were investigated in uncultivated rice paddy and the attemp was made to estimate the economical and efficient levels of nitrogen fertilization for the increased production of nutrients in reed canarygrass. The results are summarized as follows; 1. Crude protein(CP) content was higher at 1st cut of all treatments(12.5% in 3 cutting 6equency; 19, 7% in 4 cutting frequency; 22.5% in 5 cutting kquency). However, Total Digestible Nutrients(TDN) and Relative Feed Value(RFV) in 3 and 4 cutting 6equencies were higher at 3rd cut(63.5%, 126.8) and 4th cut(65.7%, 146.4) respectively in which the contents of Neutral Detergent Fiber(NDF) and Acid Detergent Fiber(ADF) were lowest. In 5 cutting frequency, 1st cut showed the highest TDN and RFV as 70.5% and 232.4 respectively. 2. The level of nitrogen fertilization affected CP content of reed canarygrass. Nitrogen fertilization of 120kgl halcut showed high CP contents of 11.4, 14.7 and 16.5% in 3, 4 and 5 cutting eequency respectively. In 3 and 4 cutting frequency, TDN and RFV were highest with nitrogen fertilization of 90kg/ha/cut where NDF and ADF were lowest, however those in 5 cutting frequency were highest with nitrogen fertilization of 30kg/ha/cut. 3. The yields of CP varied according to the number of cutting frequency and those were 0.45~0.65 in 3 cutting hquency, 0.35~0.50 in 4 cutting frequency, and 0.19~0.67tond/ha in 5 cutting 6equency respectively and TDN was 2.09~3.60, 1.64~2.77 and 0.73~2.96tons/ha respectively. 4. The ratios between the yields of CP and TDN were 5.48, 4.60 and 4.34 in 3, 4 and 5 cutting 6equency respectively and it indicates lower ratio in result of higher number of cutting 6equency. 5. Higher nitrogen fertilization increased the yields of CP and TDN. The yields of CP were higher in 5 cutting frequency as 1.55~2.62tons/ha than of 3(1.20~1.91tons/ha) and 4 cutting frequency(1.35-2.23tons/ha). The yields of TDN were 6.31~9.93, 5.99~9.99 and 7.16~10.57tons/ha in 3, 4 and 5 cutting frequency respectively. 6. The levels of nitrogen fertilization for high production efficiency of crude protein(kg CPYkg N) was estimated as 113.4~302.5kg/ha and it resulted in 1.44~2.09ton/ha of CP yields. The levels of nitrogen fertilization for high production efficiency of dry matter was 199.2-361.3kgha in which nitrogen were fertilized below 400kg/ha and it resulted in 1.64~2.17ton/ha of CP yields. 7. The levels of nitrogen fertilization for high production efficiency of total digestible nutrients(kg TDNYkg N) were 149.9~294.1kg/ha in 3 and 4 cutting kequency and it resulted in 8.66~8.89ton/ha of TDN yileds. With the levels of nitrogen fertilization for high production efficiency of dry matter of 199.2~361.3kg/ha, TDN yields were high as 8.77~9.94ton/ha.
This experiment was carried out to determine the effect of cutting frequency(3rd and 5th cut) and level of nitrogen fertilization(l50 + liquid manure, 300 and 450kgha) on growth characteristics, dry matter yield and nutritive vaule of reed canarygrass(Pha1aris arundinacea L.), at the forage experimental field, College of Agriculture and Life Sciences, SNU, Suweon. Plant height of 3rd cutting(79.2cm) was significantly higher than that of 5th cutting(58.0cm). And dry mattter yield of cutting frequency was observed in 3rd cutting(16,902kgPna) and 5th cutting(l7,833kg/ha) As the nitrogen fertilization was increased, DM yield was significantly increased(p<0.05). When the nitrogen fertilization was applied at the level 150 + liquid manure, 300 and 450kg, dry matter yields were 16,5 12, 17,123 and 18,368kg/ha, respectively. The contents of neutral detergent fiber(NDF), acid detergent fiber(ADF) and in vitro dry matter digestibility(1VDMD) were similar among cutting frequency. However, slightly higher NDF, ADF and IVDMD contents were found in 5th cutting, but there was not affected by nitrigen fertilization. Based on the results of this experiment, it were indicated that to 5th cutting and 450kg nitrogen fertilization could be obtained from the increase of dry matter yield and nutritive value (Key words : Cutting frequency, Nitrogen fertilization, Dry matter yield, Nutritive Value, Reed canarygrass)
This study was aimed to characterize the laser cutting process for the cold rolled stainless steel sheet. The principal process parameters of the cutting process were applied to both the continuous wave form and the pulsed wave form for the laser output mode. The laser-oxygen cutting process and the laser-nitrogen cutting process were also considered to characterize the quality and efficiency of the cutting process. The laser-oxygen cutting process revealed the better productivity than the laser-nitrogen cutting process, since the laser energy and the exothermic oxidation energy exerted on the laser-oxygen cutting process simultaneously during the entire cutting process. However, the straightness of the cutting section, which was considered as the most important factors, was inferior to that of the laser-nitrogen cutting process due to the formation of chromum oxide on the cutting surface. Frequency and duration of the pulsed wave form act as the main factors for the better quality, When the frequency increased from 100 Hz to 200 Hz and the duty increased from 20% to 40%, the quality factors such as the height of dross and the surface roughness were improved remarkably. The increase in the frequency from 200 Hz to 300 Hz, on the other hand, revealed the less effective in the cutting quality.
The experiment was canied out to investigate the effects of cutting frequencies (3, 4 and 5 cuts per year) in relation to fertilization of mineral nitrogen on crude protein yield and the contents of crude protein and acid detergent fibre in orchardgms(Dacty1is glomerata L.). Tne results are as follows : 1. The content of crude protein increased according to the increase in cutting frequency and showed the highest in the 1st cut in all treatments. At 4 and 5 cutting frequencies per year, the content of crude protein increased in a large extent according to the increased fertilization of mineral nitrogen. However at 3 cutting frequency, the content of cmde protein appeared higher for no application of mineral nitrogen than for the treatments with fertilization. 2. 'Ihe content of acid detergent fibre(ADF) was considerably reduced at 4 and 5 cutting frequencies and in all treatments, the lowest were recorded in the 1st cut or in the last cut. At 3, 4 and 5 cutting frequencies, the highest ADF were shown in the 2nd cut, 3rd cut and 3rd cut respectively. However, the general trend was that the content of ADF was greatly reduced according to increased level of mineral nitrogen fertilization. 3. The yeild of cmde protein was the highest at 5 cutting frequency(l.2 ton DMIha) and it indicated that the yield of cmde protein increased in accordance to the increase in fertilization of mineral nitrogen and cutting frequency. 4. In all treatments, positive correlation(p<0.001) between the yeilds of crude protein and annual dry matter yield appeared. Negative correIation(p
In this study, we designed an vibration cutting tool that can achieve improvements such as low cutting force, interrupted chip evacuation and better surface quality of cutting performance to obtain high-quality surface roughness and improvement of tool wear, which is an issue in the machining of high-hardness mold steel. Among the resonance frequency modes of the vibration cutting tool, the bending mode was used to maximize the driving amplitude of the vibration tool tip, and the resonance frequency was confirmed through the finite element method. After measuring the actual resonant frequency of the designed tool using an optical fiber sensor, the cutting force and machining surface of vibration cutting and conventional cutting were compared and analyzed in the turning process of high hardness mold steel (STAVAX). As a result of the experiment, the cutting force was reduced by about 20 % compared to the conventional cutting process, and the surface roughness was also improved by about 60 %. This study suggested that the tool wear and surface quality of high-hardness steel can be improved through the vibration cutting method in the machining of high hardness mold steel.
Based on the cutting force model, three-dimensional optimal design model was developed and optimal designed tool which is minimized cutting force is developed by computer simulation technique. In this model the objective function which is minimized resultant cutting force was used and the variables are radial rake angle, axial rake angle, lead angle of the tool. The cutting forces using conventional and optimal tools by simulation, are compared and analyzed in time and frequency domains. In time domain the cutting force of optimal tool in feed direction was more reduced and less fluctuated than that of conventional tool. Cutting forces of optimal tool in X-and Z-directions are shown a little increased than those of conventional tool. In frequency domain amplitude of insert frequency components of optimal tool in feed direction was more reduced than that of convent- ional tool. The amplitudes of insert frequency components of optimal tool in X-and Z-direction are a little increased than those of conventional tool. As the reduction of amplitude and fluctuations of the cutting force, Optimal tool is considered that tool life and surface roughness would be improved, and stable cutting would be expected.
This experiment was conducted to evaluate the effect of cutting frequency and nitrogen fertilization on th change of vegetation and the yield of dry matter on the different mixture combination of permanent pasture. 1. DM yield was increased as the increasing Arrhenatherum elntius but was decreased as the increasing Tkisetum fkavescens. 2. DM yield was unaffectdd by the different mixture combination of permanent pasture eventually. 3. In case of cutting frequency, 2-cutting showed higher DM yield than that of 3-cutting, and N-fertilization level showed significant increase in DM yield as the increasing N-level, especially 2-cutting block of N-3 showed the highest yield and 3-cutting block of N-l showed the lowest yield. 4. Mixture combination, N-level and cutting frequency did not show significant changes in DM yield of permanent pasture eventually.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.