• 한국전자통신학회논문지
• /
• 제12권3호
• /
• pp.433-438
• /
• 2017

신호의 도래각(AOAm Angle-of-Arrival) 추정 및 간섭제거 기술 등이 기반이 되는 적응 빔형성기 (Beamformer)는 레이더, 위성 등을 포함한 각종 첨단장비를 활용하여 다양한 정보를 수집하는 신호정보수집(: Signal Intelligence, SIGINT)의 핵심기술 중의 하나이다. 빔형성 기술은 안테나 어레이를 이용하여 특정 방향으로 부터의 신호를 효율적으로 수신하도록 해당 방향으로 지향성(directivity)을 가질 수 있게 빔을 생성하는 기술이다. 본 논문에서는 도래각 추정기법 및 간섭제거 기술 등이 탑재된 신호정보 수집 시스템의 입력으로 사용되는 간섭과 잡음이 포함된 수신신호 모델을 제시하고, 이 수신신호에 포함될 수 있는 다양한 신호들에 대한 특성을 고찰하고 분석한다. 제시된 신호 모델은 다양한 빔형성 기술에 대한 성능평가에 직접적으로 적용될 수 있다. 또한, 컴퓨터 시뮬레이션을 통해 제시된 수신신호 모델에 대한 주파수 영역에서의 스펙트럼을 확인한다.

• 한국패션뷰티학회지
• /
• 제1권1호
• /
• pp.105-118
• /
• 2003

The purpose of this study was to analyze entertainer Byeon Jeong-su's hair styles and thereby, apply the results to models. For the applications, models' hair styles were bisected into two sections, and thereby, the edges of the outsides were cut into solid points, and thereupon, into diverse bases by using vertical section, Perpendicular direction and square angles. On the other hand, the insides were cut in the same way of the outside bases by using radial section, varied combing and $45{\sim}90$ degree head angles. In addition, tops and sides were arranged in their corners, while a graduation technique was used to express a natural difference of levels. The fringes were cut by using free-hand and slicing techniques. furthermore, the quantity and mass of the hairs were treated with such techniques as thinning, swing, effect, rolling, slide and slicing, while a bridge product was used for coloring together with a highlight technique. The hair styles were rendered for straight and wave by using an magic iron machine. It was confirmed through this study that the same cutting techniques would result in different images depending on individuals' physical shapes, facial shapes, head skeletons and types of hairs. Thus, it is required of the hair designers to suggest their own custom hair designs adequate to individuals' images through continued image-wise hair design practices.

• 대한구순구개열학회지
• /
• 제6권2호
• /
• pp.91-105
• /
• 2003

There are significant limitations in the precision of mandibular distraction in setting a desired occlusal and facial esthetic outcome. The purpose of this study is to present the simulation method for the distraction osteogenesis treatment planning. 3-D surgery simulation software programs V-works and V-Surgery(Cybermed, Seoul, Korea) were used from the 3D CT data in addition to the conventional data facial photography, panorama and cephalogram, dental cast model. We have utilized already for the various surgical procedures to get information preoperatively for the maxillofacial surgery like cancer localization and reconstructive surgery, orthognathic surgery and implant surgery in the department of Oral and Maxillofacial surgery, Seoul National University Hospital. On the software, bone cutting can be done at any place and any direction. Separated bone segment can be mobilized in all 3 dimensional direction. After the 3D simulation on the software program, mock surgery on the RP model can be performed. This planning method was applied to two hemifacial microsomia patients. With this protocol, we could simulate the movement of bony segment after maxillofacial distraction osteogenesis

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1998년도 터널.암반역학위원회 박사학위 논문집
• /
• pp.3-34
• /
• 1998

The stability condition of rock slopes is greatly affected by the geometry and strength parameters of discontinuities in the rock masses. Rock slopes Involving movement of rock blocks on discontinuities are failed by one or combination of the three basic failure modes-plane, wedge, and toppling. In rock mechanics, practically all the parameters such as the joint set characteristics, the rock strength properties, and the loading conditions are always subject to a degree of uncertainty. Therefore, a reasonable assessment of the rock slope stability has to include the excavation of the multi-failure modes, the consideration of uncertainties of discontinuity characteristics, and the decision on stabilization measures with favorable cost conditions. This study was performed to provide a new numerical model of the deterministic analysis, reliability analysis, and reliability-based optimization for rock slope stability. The sensitivity analysis was carried out to verify proposed method and developed program; the parameters needed for sensitivity analysis are design variables, the variability of discontinuity properties (orientation and strength of discontinuities), the loading conditions, and rock slope geometry properties. The design variables to be optimized by the reliability-based optimization include the cutting angle, the support pressure, and the slope direction. The variability in orientations and friction angle of discontinuities, which can not be considered in the deterministic analysis, has a greatly influenced on the rock slope stability. The stability of rock slopes considering three basic failure modes is more influenced by the selection of slope direction than any other design variables. When either plane or wedge failure is dominant, the support system is more useful than the excavation as a stabilization method. However, the excavation method is more suitable when toppling failure is dominant. The case study shows that the developed reliability-based optimization model can reasonably assess the stability of rock slopes and reduce the construction cost.

• 대한치과기공학회지
• /
• 제38권4호
• /
• pp.255-262
• /
• 2016

Purpose: This study examined the effect of wettability of gypsum materials and rubber impression material on the marginal fitness of zirconia copings. Methods: Three commercially available gypsum materials(Fugirock EP, Snow Rock, Tuff Rock) and three zirconia blocks(iJAM Emerald, LUXEN Smile block, ICE Zirkon transluzent) were studied. The zirconia copings were fabricated by using dental CAD/CAM system. Contact angles on the impression materials were measured with contact angle measuring device. Silicone replica method was used to measure the marginal fitness and cutting was performed on the bucco-lingual and mesio-distal sides. It were observed with a stereomicroscope at °ø40 magnification. The data were statistically analyzed with One-way ANOVA. Results: Mean values of contact angles were $58.3{\pm}0.7^{\circ}$ for Tuff Rock, $77.5{\pm}0.5^{\circ}$ for Fugirock EP and $87.8{\pm}0.5^{\circ}$ for Snow Rock and the difference between them was statistically significant(p<0.05). The smallest values of marginal fitness for the JF groups were $30.7{\pm}3.0{\mu}m$ for bucco-lingual direction, $29.3{\pm}3.0{\mu}m$ for mesio-distal direction. One-way ANOVA showed statistically significant difference between groups for marginal fitness(p<0.05). Conclusion: Tuff rock gypsum material had superior wettability to others. The mean marginal fitness of the Tuff rock gypsum material group were significantly better than other groups. Thus they can be also expected to show clinically satisfactory marginal fitness.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.361-361
• /
• 2010

The separated quasi-one-dimensional ($7{\times}7$) and ($5{\times}5$) phases on vicinal Si(557) surfaces were successfully realized by changing the crystallographic orientation and thermal treatment conditions. A small change in the crystallographic orientation of the Si(557) surface stabilized the quasi-one-dimensional ($5{\times}5$) phase of a (111) facet on vicinal Si(557) surfaces and made it coexist with a quasi-one-dimensional ($7{\times}7$) phase after an optimal thermal treatment, whereas only the quasi-one-dimensional ($7{\times}7$) phase was stable on the Si(557) surface. Interestingly, this causes the (111) terraces with different widths (L) to prefer only one of the $5{\times}5$ (L=12) and $7{\times}7$ (L=9) phases resulting in long-range order of both phases along the step edge direction, which was observed by scanning tunneling microscopy (STM) and was supported by first principle calculations. In contrast, the quasi-one-dimensional ($5{\times}5$ and ($7{\times}7$) phases were arranged randomly across the step edge direction. The change of surface morphology of vicinal Si(557) surfaces will be discussed with STM images and theoretical calculations by changing crystallographic cutting angles and thermal treatment conditions.

• 한국전자거래학회지
• /
• 제27권1호
• /
• pp.111-126
• /
• 2022

미국과 중국의 기술패권 전쟁이 전개되고 연구개발의 중요성이 증가함에 따라 세계 각국은 연구개발 투자를 증대하고 있다. 우리나라는 정부 및 기업의 연구개발 투자 규모가 매년 꾸준하게 증가하였으며, 창조형 기술개발의 방향으로 전환되며 다양한 분야에서 첨단 기술이 개발되고 있다. 하지만 많은 예산과 시간, 노력이 투입된 국내의 첨단 핵심 기술이 해외로 불법 유출되는 사례 또한 꾸준히 증가하고 있다. 연구보안은 이처럼 연구환경에 존재하는 보호대상을 유출 및 탈취 등의 위험요소로부터 안전하게 보호하기 위한 활동으로, 우리나라뿐만 아니라 미국 등 각국에서 연구보안을 위한 법령 및 제도를 정비하고 있다. 본 논문에서는 연구보안제도의 개선을 위해, 전 세계 연구개발비 1위를 차지하고 있으며 연구보안정책 및 법령의 정비를 위한 논의가 활발하게 이루어지고 미국의 연구보안 사례를 중점으로 우리나라의 연구보안 정책방향을 도출하고자 한다.

• 한국멀티미디어학회논문지
• /
• 제20권8호
• /
• pp.1271-1281
• /
• 2017

It is essential to collect and analyze target information around the vehicle for autonomous driving of the vehicle. Based on the analysis, environmental information such as location and direction should be analyzed in real time to control the vehicle. In particular, obstruction or cutting of objects in the image must be handled to provide accurate information about the vehicle environment and to facilitate safe operation. In this paper, we propose a method to simultaneously generate 2D and 3D bounding box proposals using LiDAR Edge generated by filtering LiDAR sensor information. We classify the classes of each proposal by connecting them with Region-based Fully-Covolutional Networks (R-FCN), which is an object classifier based on Deep Learning, which uses two-dimensional images as inputs. Each 3D box is rearranged by using the class label and the subcategory information of each class to finally complete the 3D bounding box corresponding to the object. Because 3D bounding boxes are created in 3D space, object information such as space coordinates and object size can be obtained at once, and 2D bounding boxes associated with 3D boxes do not have problems such as occlusion.

• Geomechanics and Engineering
• /
• 제8권4호
• /
• pp.477-493
• /
• 2015

In rock drilling, the most important characteristic to clarify is the wear of the drill bits. The reason that the rock drill bits fail with time is wear. In dry sliding contact adhesive wear deteriorates the materials in contact, quickly, and is the result of shear fracture in the momentary contact joins between the surfaces. This paper aims at presenting an overview of the assessment of WC/Co cemented carbide (CC) tricone bit in rotary drilling. To study wear of these bits, two approaches have been used in this research. Firstly, the new bits were weighted before they mounted on the drill rigs and also after completion their useful life to obtain bit weight loss percentage. The characteristics of the rock types drilled by using such this bit were measured, simultaneously. Alternatively, to measure contact wear, namely, matrix wear a micrometer has been used with a resolution of 0.02 mm at different direction on the tricone bits. Equivalent quartz content (EQC), net quartz content (QC), muscovite content (Mu), coarseness index (CI) of drill cuttings and compressive strength of rocks (UCS) were obtained along with thin sections to investigate mineralogical properties in detail. The correlation between effective parameters and bit wear were obtained as result of this study. It was observed that UCS shows no significant correlation with bit wear. By increasing CI and cutting size of rocks wear of bit increases.

• 복식
• /
• 제50권7호
• /
• pp.33-46
• /
• 2000

Uniform is the dress of distinctive design or fashion worn by members of a particular group or serving as a means of identification. The postman's uniform of Ministry of Communication should be distinctive or characteristic clothing to provide high functionality and symbolization of job characteristics, cost effectiveness and esthetic. In order to design the postman's new uniform available in 2000, there has been a satisfaction survey to 1,116 postmen. A thorough analysis of survey and informal and face-to-face discussion with postmen give the direction of design concept. One of the most important things in the design concept is to make the uniform high quality & refinement. The style is a refined jumper suit in consideration of form stability, wearing satisfaction, convenience in activity. The basic colors selected are navy and medium gray. The colors of jumper are MOC red ; C.I color Green : a representative color of youth, white : a symbolic color of bright future. All three colors are plaid on a basic nary color. In the selection of the textile, synthetic fiber (Polyester 65%, rayon 35%) equipped with UV cutting as well as water resistance etc. was recommended. In the uniform design process, the effective communication with user (postman) is critical to find the requirements and needs of uniform user (postman). Also. the uniform designer should reflect the above four key factors in design development. Therefore, the uniform should provide the user with high job performance and job pride in wearing the uniform.