• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.593-601
• /
• 2021

The axial fan is an element of a blower used for ventilation in various industrial fields. Many studies on aerodynamic performance have been conducted to assess axial fans using fluid dynamics. The subject was a large axial fan size, 1800 mm in diameter with 100 horsepower. The blower's axial fan consisted of blades, hubs, hub caps, and bosses are important components. The blade design has a great influence on the aerodynamic performance. 3D point data is extracted using an aerodynamic performance prediction program, and a 3D modeling shape is generated. The blades and hubs, which are important components, can be easily modified if processed by cutting owing to the environment in which blades and hubs are manufactured through die casting or gravity casting. In this study, the structural safety of components and the analysis results of weak areas at the rated operating speed of the axial fan were verified using the maximum stress and safety factor. The tip clearance reflected in the design was the rotation of the blade. To check whether there is interference with other components, the displacement result was derived to verify the structural safety of the axial fan.

• Journal of the Korean Society of Floral Art and Design
• /
• no.43
• /
• pp.101-122
• /
• 2020

In this paper, the social paradigm is rapidly changing with the expansion of human consciousness, which has emerged as the development of 20th century science and the influence of cutting-edge media as the search for new forms of flower art sculptures. Is becoming. Accordingly, the purpose of this study is to analyze the interaction relationship of the expression elements of environmentally friendly pressed sculptures in the space as interior materials in the space where customer service is provided. (Research method) After deriving the formative expression characteristics of environmentally friendly pressed flower sculptures, and deriving interactive analysis elements between the servicescape space and humans of the pressed flower sculptures through references, service the flower sculptures for 8 installation cases The expression patterns of the interrelationships in the space of the landscape of the landscape were analyzed. (Results) The characteristics of dynamic formation and continuity were emphasized in the environment-friendly pressed sculpture space, and the interaction that the sympathetic reaction to the natural motif element felt as a new experience in space appeared. In the future, commercial spaces can be actively experienced through natural elements, and users can experience active interactions to create differentiated spaces as spaces where humans and humans coexist.

• Korean Journal of Environmental Biology
• /
• v.41 no.1
• /
• pp.31-40
• /
• 2023

In 2022, the Korean Ministry of Environment designated Parthenium hysterophorus as an ecosystem-disturbing plant. The purpose of this study was to present a management plan for P. hysterophorus considering its distribution, morphological, physiological, and ecological characteristics, and to introduce various control techniques. P. hysterophorus is native to Central America and occurs in about 45 countries worldwide. However, in Korea, it only grows in some areas of Tongyeong and Changwon, Gyeongsangnam Province. P. hysterophorus is an annual plant and spreads by seeds, moves between countries in the process of importing and/or exporting agricultural seeds, and spreads by agricultural machinery and vehicles after introduction. P. hysterophorus releases parthenin, an allelochemical that suppresses the occurrence of the surrounding vegetation, from its stems and roots. In addition, P. hysterophorus causes damage to humans and livestock through various allergens. P. hysterophorus can be controlled by physical methods, such as cutting its stems or pulling roots, and by treatment with non-selective herbicides, such as glyphosate. Many biological control research studies have been conducted and, unfortunately, there is no a practical solution so far.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.298-298
• /
• 2022

Milling is an important process that determines the quality of flour and is affected by milling machine type, scale, and tempering conditions. In addition, seed hardness is an important factor in determining the amount of tempering water and has been reported to affects flour yield and flour quality. There are reports that vitreousity is used as a measure to distinguish between soft and hard seeds, and the higher the vitreousity, the higher the protein contents. However, there is no established system for measuring viterousity of seeds and studies on the vitreousity and quality characteristics of flour are insufficient. Therefore, in this study, vitreousity, hardness, and milling characteristics were evaluated for 46 major domestic varieties, and their relationship was confirmed. After cutting the seeds using a seed cutter, vitreousity was measured, and seed hardness and flour particle size was measured using SKCS and PSI, respectively. As for the seed hardness index, 'Joa' was the lowest with 11.6, 'Yeonbaek' was the highest with 78.7. As for the milling yield, 'Saeol' had the lowest at 58.1%, and 'Hcjoong' had the highest at 88.6%. Seed hardness index and wheat flour production showed a high positively correlation, showing a similar to that of previous studies. Also, in flour particle size, 'Gobun' was the largest at 75.5 pm, and 'Joa' was the smallest at 43.1 um. Flour yield and flour particle size showed a high positively correlation. As a result of vitreousity, 'Hwangeumal' (55.2%), 'Saekeumkang' (59.1%), 'Baekkang' (52.3%), 'Goso' (44.6%), and 'Joa' (19.2%) were showed. Seed hardness and vitreousity showed a high positively correlation. Also as the vitreousity increased, the flour yield also showed a tendency to increase. In addition, as the seed hardness increased, particle size of the flour yield also showed a tendency to increase. It is thought that this result can be used as a measure to determine the quality of flour with vitreousity. However, further analysis of wheat varieties and methods of analyzing vitreousity are needed.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.1
• /
• pp.39-58
• /
• 2024

Tunnel Boring Machines (TBM) use multiple disc cutters to excavate tunnels through rock. These cutters wear out due to continuous contact and friction with the rock, leading to decreased cutting efficiency and reduced excavation performance. The rock's abrasivity significantly affects cutter wear, with highly abrasive rocks causing more wear and reducing the cutter's lifespan. The Cerchar Abrasivity Index (CAI) is a key indicator for assessing rock abrasivity, essential for predicting disc cutter life and performance. This study aims to develop a new method for effectively estimating CAI using rock strength, petrological characteristics, linear regression, and machine learning. A database including CAI, uniaxial compressive strength, Brazilian tensile strength, and equivalent quartz content was created, with additional derived variables. Variables for multiple linear regression were selected considering statistical significance and multicollinearity, while machine learning model inputs were chosen based on variable importance. Among the machine learning prediction models, the Gradient Boosting model showed the highest predictive performance. Finally, the predictive performance of the multiple linear regression analysis and the Gradient Boosting model derived in this study were compared with the CAI prediction models of previous studies to validate the results of this research.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.14 no.3
• /
• pp.2703-2715
• /
• 1972

1. Title of Research Research on the Loss of Irrigation Water Flowing in Earth Channel. 2. Purpose and Importance of Research The purpose of this research is to obtain the accurate loss rated of irrigation water flowing in earth channels so as to give a criterion of designing rational and effective suplpy project of irrigations water. It is the present status that the loss rates of 10 to 20% are obscurely applied without any scientific proof. Therefore, the importance of this research lies in securing loss rates, which are experimentally proves to be suitable for specific local conditions. 3. Content and Scope of Research The selected test reach of the main channel is 1,000m long. Discharges were measured at up and downstream enps by using current meter. The test reach of the lateral channel is 500m long, and parshall flumes were set at both ends to measure inflow and outflow. Finally, for the supply ditch, the test section is 200m long, and sharp-edged rectangular weirs were provided at both ends to measure inflow and outflow. In addition, various factors influence on the loss of irrigation water in channel wer examined. 4. Results of Research and Proposition Results: 1. In the main channel, which is 1,000 M long, and has a slope of 1/3,000 and was constructed by cutting earth, its loss rate is 9.64%. 2. In the lateral, which has a slope of 1/1,500, and is 500m long, and was constructed by cutting, its loss rate is 15.55%. Its average seepage rate is 2.08cm/day. 3. In the supply ditch, which has a slope of 1/300, and is 200m long, and was constructed by filling earth, its loss rate is 12.34%, its average seepage rate being 3.37cm/day. Proposition: As could be seen in the results above-mentioned, it is contradictory to apply a loss rate of 20% for every main channels and 15% for every laterals without variation, as done so for in planning irrigation project. The fact, however, is that loss rates must be different according to localities and characteristics. Due to the fact that this experiment is small in its scope and is nothing but a preliminary one, it is hardly possible to draw decisive conclusions with the results obtained in this research. Loss rates, that are secured through more extensive research, should be used, in order to establish precise irrigation project. Moreover, such researches should be carried out for a number of loclities throughout the nation.

• Weed & Turfgrass Science
• /
• v.7 no.2
• /
• pp.140-147
• /
• 2018

In Korea, mowing the grass of a grave (Beolcho) is a very important event preceded by Chuseok (Korean thanks giving day) and Si-Hyang (annual ancestral feast). Because Beolcho usually takes place one or two weeks before Chuseok, the traffic accidents on roads are getting worse and safety accidents are getting more and more. Erroneous Beolcho methods can cause the soil to be exposed and cause the loss of soil or the low shoot density of graveyard grass or weed occurrence. Therefore, the dispersion of the Beolcho timing and the approprite method can be import issues. The present study assessed the effects of grass mowing timing and height before Chuseok on the growth of Zoysia japonica and Z. matrella. The mowing timing was evaluated at 1 week, 2 weeks, 3 weeks, and 4 weeks before Chuseok, and the mowing height differently according to the two type of grass. In Z. japonica, the faster mowing before Chuseok, the longer the plant height, and the coverage rate and shoot density were higher. In Z. matrella, the faster mowing, the longer the shoot length, but the coverage rate and shoot density did not show any difference or tendency. As compared to Z. japonica, the plant height of Z. matrella was kept short regardless of the time of mowing. In both grasses, the plant height was shortened when mowing was done at low cutting height, but the coverage rate and shoot density were decreased. In addition, it was shown that it is advantageous to maintain the shoot density of graveyard lawn by 40-50 mm or 30-40 mm cutting above the ground for Z. japonica or Z. matrella, respectively.

• Economic and Environmental Geology
• /
• v.50 no.1
• /
• pp.1-14
• /
• 2017

The analytical conditions including surface state, moisture effect, and device condition were investigated for applying Short Wave Infrared(SWIR) spectroscopy to the field survey. Among the three surface state of samples (exposed surface, cutting face and powder), both spectra from the exposed surface and cutting face are almost identical whereas spectral variation was detected in powder sample. Over 24-hours-dryring of the wet sample at room temperature, the samples show a similar spectrum with that of dry condition. The result suggests that outcrop samples mighty be dried for 24 ~ 48 hours depending on the wetness of outcrop. The bright minerals could produce stable spectra with 10 times measurements as default value of the device under SWIR spectroscopy but the dark minerals would require about 10 seconds, which corresponds to 100 times measurements to get the reliable spectra. The position and shape 2,160 ~ 2,330 nm and/or other spectral features of hydrothermal alteration minerals by SWIR spectroscopy could be used for a classification of hydrothermal alteration zone in the field. Absorption peaks in 2,160 ~ 2180 nm are useful for identifying (advanced) argillic zone by spectral characteristics of kaoline, dickite, pyrophyllite, and alunite. Absorption peaks in 2,180 ~ 2,230 nm are able to define muscovite, sericite, and smectite, which are key alteration minerals in phyllic zone. Absorption peaks in 2,230 ~ 2,270 nm can be used to recognize prophylitic zone where chlorite and epidote occur. Absorption peaks of other principle minerals such as talc, serpentine, amphibole, and carbonate group are mainly detected within the wave length of 2,270 ~ 2,330 nm. This result indicates that the spectra of these minerals need to be carefully interpreted.

• Horticultural Science & Technology
• /
• v.29 no.5
• /
• pp.456-460
• /
• 2011

This study was carried out to compare the pattern of mutant variation and to evaluate the characteristics of mutants obtained by gamma irradiation in rose 'Kardinal'. Forty four rooted cuttings of 'Kardinal' were irradiated at 70 Gy gamma-ray dose from a $^{60}Co$ source to induce mutants in 2002. The irradiated plants were planted in field, and observed spotting of petal color mutants from 2002 to 2004. Four different kinds of mutant twigs with each different color flower were obtained from the irradiated 'Kardinal' with red petal. After being identified to be a stable mutant from 2004 to 2008, each mutant line propagated by cutting was hydroponic-cultured to evaluate the characteristics in the greenhouse from 2008 to 2009. Four mutant lines obtained from 'Kardinal' with red petal (Red group, 44A, 45B) include KA1 with light pink petal (Red group, 55B-55D), KA2 with pink petal (Red group, 63A-63B), KA3 with deep pink (Red purple, N57A-N57C), and KA4 with orange red (Red group, 43A-43B). Diameters of each flower in four mutant lines were different from 'Kardinal'. The line KA1 was 9.5 cm wide, and it showed the smallest diameter when compared to other mutants. While the line KA2 was the largest one with 12.5 cm 'Kardinal'. Petal number per flower was also variable among the mutants. The line KA2 had 39.8 petals being the largest number among the mutants, while the line KA1 was the lowest one compared to 35.5 petals of 'Kardinal'. Petal color was measured by using colorimeter. Brightness (L) measured at each petal of four mutants increased more than 'Kardinal'. CIE Lab values, a and b decreased more than 'Kardinal' at the petal color of three mutants except the line KA4. Characteristics of shoot, leaf, etc. from four mutants were also different from the ones of 'Kardinal'. The line KA1 was shortest in shoot, node and peduncle length, and lowest in prickle number. The reverse side of leaves was reddish green color in 'Kardinal' as well as the line KA4, but green color in the line KA1, KA2, and KA3.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.8 no.4
• /
• pp.305-313
• /
• 1996

CTD measurements were conducted in the Nakdong estuary on the several sections or along-plume and cross-plume directions in 1993 and 1994. Internal Froude number Fi=0.22-0.35 in ebb tides and 0.14 in flood tides suggest that Nakdong river plume may go farther seawards in the along-plume direction with little mixing with the adjacent sea water after the construction of Nakdong river barrier. From Dadae-Po to Gaduk-Do section of cross-plume direction, three cores of low salinity were found. The main plume outflows from the newly made channel by cutting Ulsuk-Do after the construction of barrier. The low salinity core found near Gaduk-Do is the plume patch advected by tidal currents. Rossby deformation radius varied with the tidal cycle so that Coriolis effect is strengthened in flood tides to deepen the isohalines westwards to the Gaduk-Do site. Internal wavelike shape was found in the section of cross-plume direction during ebb tides. Richardson number of the section suggests the possibility of forming internal wave but more precise observations are necessary.