• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.9 no.1
• /
• pp.25-34
• /
• 1976

The purpose of the present study on the radula of Korean marine gastropods is to determine the systematic position of the species by the radula features. The radula features of 9 Families based on the observation of specimens consisting of 31 species are described briefly as follows. 1. Naticidae; Radula formula 2-1-C-1-2. Rachidian is 3-cusped. All cusps are strong and pointed. The lateral tooth is massive and strong with a huge triangula cusp. Two marginal teethare slender, long and strong. 2. Cymatidae; Radula formula 2-1-c-1-2. Fachidian, 1-cusped. Cusp is strong and acute. The basal margin is toothed with a number of small denticles. The lateral tooth is beak-like and strong with groove inside. The marginal teeth are slender and pointed. 3. Tonnidae; Radula Formula 2-1-C-1-2. Rachidian, 3 cusped. Central cusp is huge, strong and abruptly pointed. Lateral cusp is blunt and relatively small. The lateral tooth and maginal teeth are identical to that of the preceding one. 4. Muricidae; Radula formula 1-C-1. Rachidian has 3 to 5 cusps. Central cusp, long, thick, strong and pointed. Lateral cusps are rather shorter than central, thick, strong and well cut with several minute denticles along outer margin. The lateral tooth is falciform. 5. Pyrenidae; Radula formula 1-c-1 Rachidian lacks of cusp. The base is thin, narrow, small and rectangular. Lateral tooth has 2 cusps with a crescent shaped base. 6. Buccinidae; Radula formula 1-C-1. Rachidian has 3 to 7 cusps. The base is massive and broadened laterally. The lateral tooth is large-and has 2 to 4 cusps. The central cusp is the shortest, and become longer towards the each side. 7. Busyconidae ; Radula formula 1-C-1. Rachidian, 3-cusped with a massive base. All cusps are pointed and strong. Centeral cusp is rather shorter than lateral one. Lateral tooth, 2-cusped. Inner cusp short about one half the length of outer one. 8. Fasciolariidae; Radula formula 1-C-1. Rachidian, 3 to 4-cusped. Very small in size. Lateral tooth broadened laterally with about 10 thin, long, sharp cusps. 9. Volutidae ; Only the rachidian exists. Rachidian, 3-cusped. All cusps are strong and sharply pointed. Central cusp is narrower than lateral ones. Anterior basal margin is concave.

• Journal of Chest Surgery
• /
• v.12 no.4
• /
• pp.350-354
• /
• 1979

The incidence of congenital aortic valvular stenosis has been known rare, and approximately 3-6% of congenital heart diseases. Recently, we experienced 1 case of congenital aortic valvular stenosis, and which was corrected surgically under extracorporeal circulation successfully. A 11 years old male pt. was admitted to N.M.C. because of dyspnea, dizziness, chest pain and episode of syncope. An auscultation, harsh systolic murmur [Gr. IV/VI] was noted at aortic area and also palpable strong thrill. ECG showed LVH c strain pattern and suspicious LVH finding in simple chest P-A film. In Lt. cardiac catheterization, abrupt pressure change [110mmHg] between LV & Aorta was noted across the aortic valve. And aortic insufficiency was absent, well visualized both coronary arteries and suspicious bicuspid aortic valve in aortography. Valve form was bicuspid, large one was noncoronary cusp and another cusp was Rt. & Lt. coronary cusp which was interpositioned rudimentary commissure. Central aortic orifice was about 5ram in diameter. Valvulotomy was done along the fusioned commissure between noncoronary cusp and Rt. & Lt.coronary cusp, and then short incision was added between Rt. coronary cusp & Lt. coronary cusp. Immediate postoperative course smooth but unknown cardiac arrest was noted in POD second day. Complete recovery was done without sequelae by resuscitation. After operation, clinical symptoms were subsided but systolic murmur [Gr. II/VI] was audible at aortic area, diastolic murmur was absent. ECG showed still remained LVH but much decreased R wave voltage in Lt. precordial leads. Simple chest P-A showed no interval changes compared to preop film. Control Lt. heart catheterization revealed still remained pressure gradient [40ramrig] between LV & Aorta. But much decreased pressure gradient compared to preop pressure gradient [110mmHg].

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.1
• /
• pp.58-72
• /
• 2004

Statement of problem : Clinically, maxillary first premolar has a high risk of fracture. This is thought to be caused by the susceptible figure which the maxillary first premolar has In other words, sharp cusp angles of the premolar is thought to influence this situation. Purpose : This study was to know stress distribution of all-ceramic crown according to the cusp angle. Material and Method : It was manufactured a three dimensional finite element model simplified maxillary first premolar, and then analyzed stress distribution when cusp angle was each $80^{\circ}$, $90^{\circ}$, $100^{\circ}$, $110^{\circ}$ and $120^{\circ}$. Results and conclusion : 1. The von Misses stress showed that stress decreases as cusp angle increases in the central groove of the occlusal surface. 2. It showed that maximum principal stress was centered at the region of the central groove of the occlusal surface and a region which the force was inflicted. And also it appeared high on the lingual and buccal side of finish line. 3. The X axis of normal stress was focused in the central groove of the occlusal surface. The Y axis normal stress appeared high in the central groove of the occlusal surface, buccal and lingual side. 4. The Stress near the finish line showed a low value compared with stress in the region of the central groove of the occlusal surface. 5. It shows that the most dangerous angle for tooth fracture was on $80^{\circ}$ of the cusp angle and low on $120^{\circ}$ of its.

• Journal of Technologic Dentistry
• /
• v.38 no.3
• /
• pp.217-224
• /
• 2016

Purpose: This study aimed to generate 3-D occlusal curvatures and evaluate the relationship between the occlusal curvatures and mandibular occlusal morphology factors. Methods: Mandibular dental casts from 25 young adult Korean were scanned as a virtual dental models with a 3-D scanner(Scanner S600, Zirkonzahn, Italy). The curve of Spee, curve of Wilson, and Monson's sphere were generated by fitting a circle/sphere to the cusp tips using a least-squares method. The mandibular mesiodistal cusp inclination, buccolingual cusp inclination, and tooth wear parameters were measured on the prepared virtual models using RapidForm2004(INUS technology INC, Seoul, Korea). Wilcoxon signed-rank test was performed to test side difference, and Spearman's rank correlation coefficients were investigated to verify the correlation between occlusal curvatures and correlated factors (a=0.05). Results: The mean radii of curve of Spee were $83.09{\pm}33.94$ in the left side and $79.00{\pm}28.12mm$ in the right side. The mean radii of curve of Wilson were $66.82{\pm}15.87mm$ in the mesial side and $47.87{\pm}9.40mm$ in the distal side with significantly difference between mesiodistal sides(p<0.001). The mean radius of Monson's sphere was $121.85{\pm}47.11mm$. Most of the cusp inclination parameters showed negative correlation for the radius of Monson' sphere(p<0.05). Especially, the buccolingual cusp inclinations in mesial side of molar showed high correlation coefficients among the factors(p<0.05). Conclusion: The radius of Monson's sphere was greater than the classical 4-inch values, and the buccolingual cusp inclinations in mesial side of molar can be considered as one of the main factors correlating with the radius of Monson's sphere.

• The Journal of Korean Academy of Prosthodontics
• /
• v.8 no.1
• /
• pp.30-36
• /
• 1968

The measurements on the various items, such as arch form, kinds of anterior dental arch, degree of curvature in anterior dental arches, relationship between direction of the disto-incisal edge of the canine and first premolar, and kinds of posterior dental arch in upper dental arches were studied on 311 cases of the Korean adults aged from 20 to 30years. The results were as follows. 1. The commonest type of the upper dental arches was U-type (53.7%), the remaining were O-type (25.4%) and V-type (20.0%). 2. A slight curvature type (71.87%) prevailed against angulated curvature type in upper anterior dental arches. 3. The degree of curvature from $121^{\circ}$ to $160^{\circ}$ in anterior dental arches was common, and the degree of curve of 1-type with on curvature was smaller than 4, 5 type with two curvature. 4. The direction of the disto-incisal edge of canine went between the tip of the buccal cusp and the lingual incline of the buccal cusp of the first premolar in most dental arches and went lingual incline of the buccal cusp of the first premolar in U-type, from buccal cusp to lingual cusp of the first premolar in O-type and were distributed from buccal edge to central groove of the first premolar in V-type. 5. A posterior dental arch with almost straight curvature was common in 60.87%, and 4-type with a half rounded curve from first premolar to second molar was next.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.10a
• /
• pp.106-110
• /
• 2001

The ball-end milling process is widely used in the die/mold industries, and it is very suitable for the machining of free-form surfaces. However, this process is inherently inefficient process to compared with the end-milling or face milling process, since it relays upon the machining at the cutter/surface contact point. The machined part is the result of continuous point-to-point machining on the free-form surface. And cusps (or scallops) remain at the machined part along the cutter paths and they give the geometrical roughness of the workpiece. Thus, for the good geometrical roughness of the workpiece, it is required very tightly spaced cutter paths in this ball-endmilling process. However, with the tight cutter paths, the geometrical roughness of the workpiece is not regular on the workpiece since the cusp height is variable in the previously developed ISO-parametric or Cartesian machining methods. This paper suggests a method of tool path generation which makes the geometrical roughness of workpiece be constant through the machined surface. In this method, Ferguson Surface design Model is used and cusp height is derived from the instantaneous curvatures. And, to have constant cusp height, an increment of parameter u or v is estimated along the reference cutter path. In ball-end milling experiments, the cusp pattern was examined, and it was proved that the geometrical roughness could be regular by suggested tool path generation method.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.2
• /
• pp.79-92
• /
• 2000

The purpose of this study was to estimate the morphology and the size of permanent maxillary molar in Korean Adult. The 100 dental college students with a normal dentition and without any dental prosthesis and severe caries were selected for this study. The subjects were taken impression to make study model. On the study model, authour three times measured those sizes and estimated morphological structures with a calipers, a Boley gauge and a protractor. The results were as follows; 1. In the maxilary first molar's clinical crown height, mesiolingual cusp height was 6.34mm, mesiobuccal cusp height was 6.05mm, distobuccal cusp height was 5.20mm. And in the maxillary second molar's clinical crown height, mesiobuccal cusp height was 5.85mm, mesiolingual cusp height was 5.71mm, distobuccal cusp height was 5.51mm, distolingual cusp height was 3.53mm. This result considered that the maxillary first molar inclined to distobuccal, and the maxillary second molar more upright than the maxillary first molar. 2. In the width of clinical crown, the maxillary first molar was 10.43mm, the maxillary second molar was 10.20mm, and the difference between the first molar's width and the second molar's width was 0.23mm. 3. The crown thickness was measured divided into mesial buccolingual half and distal buccolingual half. The mesial buccolingual half was 11.14mm, and distal buccolingual half was 10.35mm in the maxillary first molar, and in the maxilary second molar, mesial buccolingual half was 11.25mm, and distal buccolingual half was 9.72mm. This result considered that height of convergency located in mesial half of crown. 4. In the buccal groove length, total length and ratio, the maxillary first molar was 52.5%, the maxillary second molar was 50%. And the development of buccal groove in the maxillary first molar was 59% in case of the well developed buccal groove and 41% in case of the weak developed one. And frequency of buccal pit of the maxillary first molar was 12.5%. Whereas, the frequency of buccal of the well developed buccal groove in the maxillary second molar was 37% and that of the weak developed one was 63%. And frequency of buccal pit of the maxillary second molar was not seen. 5. The 3 cusp type tooth cannot be found in the maxillary first molar and the frequency of 3 cusp type tooth in the maxillary second molar was as small as 6% 6. In the case of 4 cusp type tooth, the size of distal lingual cusp molar was difference between in the maxillary first molar and in the maxillary second molar by about 1mm. 7. The intercuspal distance was similar in the maxillary first premolar and second molar. And intercuspal distanc of mesial half of the maxillary first molar and the maxillary second molar was silmillar, too. 8. The an measurement of occlusal surface in 4 cusp type tooth showed that the angle of occlusal surface between the distobuccal and mesiolingual was an obtuse angle, and the angle of occlusal surface between mesiobuccal and distolingual was an acute angle in the both cases of maxillary first and second molar. 9. The measurements of the development of Carabelli cusp showed that the frequency of the well developed one was 7% and that of the weak developed one was 56% in the maxillary first molar. And there cannot be found the well developed one and can be found 2.5% only in the case of the weak developed one in the maxillary second molar. 10. The well developed oblique ridge in the maxillary first molar showed the 100% frequency and that in the maxillary second molar showed the 85.5% frequency. The frequency of mesiomarginal ridge tubercle in the maxillary first molar was 82% and that in the maxillary second molar was 30.5%. And the frequency of distal accessory tubercle in the maxillary first molar can be seen about 19% and that in the maxillary second molar can be seen about 12%.

• Journal of the Korean Mathematical Society
• /
• v.46 no.3
• /
• pp.513-521
• /
• 2009

We first introduce a complex hyperbolic space and a complex hyperbolic manifold. After defining the canonical horoball and the canonical cusp on the complex hyperbolic manifold, we estimate the volumes of canonical cusps of complex hyperbolic manifolds. Finally, we deal with cusped, complex hyperbolic 2-manifolds, and in particular, the ones with only one cusp.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.15-19
• /
• 1996

The cusp height in ball end milling, flat end milling and filleted end milling according to various surface inclination angle was calculated. The calculation result shows that, for each kind of tools, there exists certain range of inclination angle in which cusp height characteristics favorable. From machining time calculation, filleted end mill found to be superior to flat end mill in rough machining of sculptured surface.

• Journal of the Korean Mathematical Society
• /
• v.61 no.5
• /
• pp.899-922
• /
• 2024

Let f(z) be a primitive holomorphic cusp form and g(z) be a Maass cusp form. In this paper, we give quantitative results for the sign changes of coefficients of triple product L-functions L(f × f × f, s) and L(f × f × g, s).