• 디지털산업정보학회논문지
• /
• 제8권4호
• /
• pp.1-11
• /
• 2012

This paper is the study on the development of a torque precision measuring system using the curve fitting algorithm. This system can be divided into the hardware part and the software part. The hardware part consists of the main base board, the DAQ(Data Aquisition) board and Calibration parts. The software part consists of the software filter module and the curve fitting algorithm module. We have tested the torque transducer including the strain gauge for 200 Nm range and have analyzed the data acquired with the curve fitting algorithm by using this system. The DAQ board converts the electric signal induced by the transducer to the digital value precisely by using the shunt calibration procedure. The main board including the curve fitting algorithm calculates the exact digital torque value by using the digital value from the DAQ board. In this study, we confirmed that the result of the appropriate high-order power-series polynomial function is more accurate than the result of the low-order power-series polynomial through the system.

• 대한전자공학회논문지TC
• /
• 제43권3호
• /
• pp.49-58
• /
• 2006

본 논문에서는 시변 주파수 선택적 페이딩 채널에서 OFDM (orthogonal frequency division multiplexing) 시스템을 위한 curve-fitting 채널추정 방법을 제안한다. 제안된 방법은 시간영역 및 주파수영역에서 1차원 curve-fitting을 통하여 smoothing과 interpolation을 순차적으로 수행함으로써 채널추정 정확도를 크게 개선할 수 있다. 먼저, 파일럿 심벌들을 사용하여 LS(least-Square) 추정치를 구하고, 이를 바탕으로 파일럿 밀도가 상대적으로 높은 영역을 선택하여 최소자승오차 기준에 따라 적절한 차수의 다항식으로 1차원 curve-fitting을 수행한다. 다음으로, 이 다항식을 이용하여 주어진 범위 내에 존재하는 LS 추정치들을 smoothing하고, interpolation 또는 prediction을 통하여 데이터 전송을 위하여 필요한 채널추정치들을 구한다. 이어서, 선택된 영역에서 얻어진 채널추정치들을 나머지 영역에서 또 다른 다항식을 사용하여 동일한 과정으로 1차원 curve-fitting을 통하여 smoothing과 interpolation을 수행함으로써 시간영역 및 주파수영역에서의 채널추정을 완료한다. 모의실험을 통하여 다양한 채널환경에서 MSE (mean square error) 및 BER (bit error rate) 성능을 분석한 결과, 제안된 방법이 기존의 채널추정 방법들에 비하여 월등히 우수하며, 최적의 Wiener 필터링 방법보다도 우수함을 보였다.

• 한국CDE학회논문집
• /
• 제4권1호
• /
• pp.32-42
• /
• 1999

Approximate lofting or skinning is one of practical surface modeling techniques well used in CAD and reverse engineering applications. Presented in this paper is a method for approximately lofting a given set of curves wihin a specified tolereance. It is based on refitting input curves simultaneously on a common knot vector and interpolating them to get a resultant NURBS surface. A concept of reducing the number of interior knots of the common knot vector is well adopted to acquire more compact representation for the resultant surface. Energy minimization is newly introduced in curve refitting process to stabilize the solution of the fitting problem and get more fair curve. The proposed approximate lofting provides more smooth surface models and realizes more efficient data reduction expecially when the parameterization and compatibility of input curves are not good enough. The method has been successfully implemented in a new CAD/CAM product VX Vision? of Varimetrix Corporation.

• 공업화학
• /
• 제29권6호
• /
• pp.789-798
• /
• 2018

고분자전해질 연료전지(PEMFC)의 성능을 예측할 수 있는 empirical equation의 역할이 중요하게 대두되고 있다. 본 연구에서는 polarization curve에서 activation loss, ohmic loss, mass transfer loss 영역을 분리하였고, 현재까지 개발된 model 중 Kim의 model과 Hao의 model을 선정하여 각 영역의 fitting을 시행하였다. 온도, 압력, 산소 농도 및 막 두께를 운전변수로 설정하여 조건 변화에 대한 각 loss의 변화를 비교하였다. 기존 model은 전반적으로 좋은 fitting 정확도를 보였지만, 분리된 loss 영역에서는 부정확한 fitting 결과를 보이기도 하였다. 연료전지 성능 예측의 정확도를 개선하기 위하여 converge coefficient를 도입한 새로운 model을 제안하였다. 본 연구에서 제안한 model을 연료전지 성능 예측에 적용한 경우에 신뢰도 평가에서 개선된 결과를 얻을 수 있었다.

• Journal of Magnetics
• /
• 제6권4호
• /
• pp.142-144
• /
• 2001

A method to deduce the rotational magnetization curve from experimental magnetization of partially aligned uniaxial anisotropy system has been investigated. The curve obtained by this process has been evaluated quire close to the theoretical magnetization curve compared to that obtained by linear extrapolation from high field data. This new approach offers better accuracy for the determination of magnetic anisotropy by fitting a calculated magnetization curve to the obversed one.

• 한국소음진동공학회논문집
• /
• 제19권9호
• /
• pp.943-949
• /
• 2009

Many studies for measuring vibration using image signal are suggested. These methods can measure vibration of multi-points simultaneously. However, it has the disadvantage that is very sensitive to an environment. If the measured environment is not good, image signals can be measured including much background noise. So, it is difficult to obtain accurate vibration from the measured image signals. Another problem is that camera imaging has a resolution limit. Because the resolution of the camera image is relatively much lower than that of a data acquisition system, accurate measuring vibration cannot be performed. In this paper, we proposed the enhanced technique for measuring vibration using camera signal. The key word of this paper is a curve fitting. The curve fitting can exactly detect the measurement line of interested object. So, we can measure the vibration in noisy environment. Also, it can overcome the resolution limit.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.107-108
• /
• 2020

The severity of the global climate crisis is increasing due to greenhouse gases caused by human activities. As a result, countries and industries are making efforts to reduce carbon dioxide emissions, the biggest cause of global warming. Many studies have been conducted to predict carbon emissions in the construction sector to reduce this, but they have not actually produced a highly usable formula in the field. Therefore, the two variables 'Curve Fitting' were performed based on the data of excavators and trucks measured at the field. As a result, we have obtained a carbon dioxide emission prediction model for construction equipment, and we would like to use it to help establish an eco-friendly process plan.

• 한국CDE학회논문집
• /
• 제11권1호
• /
• pp.1-10
• /
• 2006

This paper addresses B-spline curve approximation of a set of ordered points to a specified toterance. The important issue in this problem is to reduce the number of control points while keeping the desired accuracy in the resulting B-spline curve. In this paper we propose a new method for error-bounded B-spline curve approximation based on adaptive selection of dominant points. The method first selects from the given points initial dominant points that govern the overall shape of the point set. It then computes a knot vector using the dominant points and performs B-spline curve fitting to all the given points. If the fitted B-spline curve cannot approximate the points within the tolerance, the method selects more points as dominant points and repeats the curve fitting process. The knots are determined in each step by averaging the parameters of the dominant points. The resulting curve is a piecewise B-spline curve of order (degree+1) p with $C^{(p-2)}$ continuity at each knot. The shape index of a point set is introduced to facilitate the dominant point selection during the iterative curve fitting process. Compared with previous methods for error-bounded B-spline curve approximation, the proposed method requires much less control points to approximate the given point set with the desired shape fidelity. Some experimental results demonstrate its usefulness and quality.

• 한국농공학회논문집
• /
• 제56권1호
• /
• pp.101-107
• /
• 2014

It has been known that Terzaghi's consolidation theory is not well consistent with the consolidation phenomenon on the soft clay ground, but this theory has still been adopted normally in practice because there is no method for estimating the consolidation settlement and rate easier than Terzaghi's theory. It is impossible to map whole part of consolidation settlement vs time curve to the curve of Terzaghi'z average degree of consolidation. If the primary consolidation and the secondary compression are happened same time, it would be useless of trying to find the end of primary consolidation, but it is needed for using Terzaghi's theory that the end of consolidation is determined to the time of beginning consistency between the final settlement analyzed with curve fitting and the experimented consolidation settlement.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.326-328
• /
• 1987