• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.9
• /
• pp.1380-1386
• /
• 2012

It is important to consider supply voltage stability in case of design and construction of a substation at electric railway because a urban transit is operated by electricity and it is driven simultaneous in the same section. This paper study on variation of the dynamic characteristic of supply voltage according to the track environment and spatial distribution as driving of urban transits. Simulation tool, TOM(Train Operations Model) software is used to ensure stability of feeder system being used around the world. As results of simulation, voltage of the contact wire is in limits on driving operation diagram of urban transits. Also, it has confirmed that there is a correlation the phase current, depending on the speed of urban transit and track environment like vertical gradients and curve radius.

• Journal of Pharmaceutical Investigation
• /
• v.23 no.1
• /
• pp.11-18
• /
• 1993

Inclusion complex of ibuprofen with $2-Hydroxypropyl-{\beta}-cyclodextrin\;(HP-{\beta}-CD)$ in aqueous solution and in the solid state was evaluated by the solubility method and the instrumental analysis such as infrared spectroscopy, thermal analysis and x-ray diffractometry. The aqueous solubility of ibuprofen was increased linearly with the increase in the concentration of $HP-{\beta}-CD$, showing an $A_L$ type phase solubility diagram. The results showed that the dissolution rate of ibuprofen was significantly increased by complexation with $HP-{\beta}-CD$. $Ibuprofen-HP-{\beta}-CD$ complex enhanced the mean plasma concentration levels and the area under plasma concentration-time curve after oral administration compared to those of the drug alone. It is concluded that the complex of ibuprofen with $HP-{\beta}-CD$ increases the dissolution rate and improves the bioavailability of the ibuprofen by the formation of a water-soluble complex.

• Journal of Pharmaceutical Investigation
• /
• v.10 no.1
• /
• pp.13-23
• /
• 1980

Bromphenol blue (BPB) was studied with rabbits in normal and disease states to understand the basic principles of hepato-biliary transport process, and the effect of disease states on the drug disposition. The time course of plasma concentration and of biliary excretion was studied in normal and $CCl_4$ intoxicated rabbits. A conspicuous retention of BPB clearance from the plasma was observed, and the slope of the first-phase of plasma curve was decreased in the intoxicated rabbits. The shape of biliary excretion was same in normal and intoxicated states, but the amount of BPB excreted into bile in the intoxicated states was much smaller than in normal states. A relationship was found which enables one to predict the pattern of uptake of BPB by the liver, and the pattern of excretion into the bile in normal states, but was not in $CCl_4$ intoxicated states. It may be that the application of this experiments would extend the effect of disease states on the drug disposition.

• The Korean Journal of Physiology and Pharmacology
• /
• v.8 no.1
• /
• pp.65-67
• /
• 2004

Dehydroevodiamine (DHED) is one of the bioactive components of the Chinese herbal medicine Wu-chu-yu-tang that has been shown to produce various pharmacological effects. In the present study, we investigated the pharmacokinetics of DHED after intravenous administration of two doses (2.5 and 5 mg/kg) in anesthetized rats. The plasma concentration of DHED was measured by reverse-phase high-performance liquid chromatography with UV detection. The mean area under the curve of the time-concentration profile was $21.9\;and\;53.9\;{\mu}g{\cdot}min/ml$ after the 2.5- and 5-mg/kg doses, respectively, and the volume of distribution was 1584.9 and 1580.6 ml following 2.5- and 5-mg/kg doses, respectively. Plasma concentration profiles versus time were compatible with a two-compartment model and first-order kinetics. The terminal elimination half-life was $91.8{\pm}16.6\;min$ and $78.7{\pm}11.9\;min$ in the dose of 2.5 and 5 mg/kg, respectively. This is the first report to study the pharmacokinetics of DHED in animals.

• Journal of Power Electronics
• /
• v.5 no.4
• /
• pp.289-304
• /
• 2005

This paper describes a simple control structure and power conditioning system for an indirect vector controlled stand-alone induction generator (IG) used to operate under variable speed. The required reactive power for the IG system is supplied by means of a capacitor bank and a voltage-source PWM converter. Using a capacitor bank to transfer the reactive power to the IG under the rated speed and no-load conditions starts the IG operation and reduces the PWM converter size. The vector control structure for the variable speed IG power conditioning system compensates for changes in the electrical three-phase and DC loads while considering the magnetizing curve of the IG. The vector control structure is developed to regulate the DC link voltage of the PWM converter and the IG output voltage. The experimental and simulated performance results of the IG power conditioning system at various speeds and loads are given and show that this proposed scheme can be used efficiently for a variable speed, wind energy conversion system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.3
• /
• pp.200-207
• /
• 2011

Abstract: The effect of lead free glass frit compositions on the properties of thick film conductor and resistor pastes were investigated. Two types lead free frits, HBF-A(without $Bi_2O_3$) and HBF-B(with $Bi_2O_3$) were made from $SiO_2$, $B_2O_3$, $Al_2O_3$, CaO, MgO, $Na_2O$, $K_2O$, ZnO, MnO, $ZrO_2$, $Bi_2O_3$. And Ag based conductor pastes and $RuO_2$ based resistor paste were prepared by mixed with these frits and functional phase(Ag and $RuO_2$), and organic vehicle. The properties of thick film conductor and resistor sintered at $850^{\circ}C$ were studied after printing on $Al_2O_3$ substrate. The morphology of the sintered films surface were SEM and EDS were carried out to analysis the chemical composition on resistor surface and state of Ru atom in frit matrix.

• Journal of the Korean Society for Heat Treatment
• /
• v.8 no.2
• /
• pp.101-112
• /
• 1995

A study was made to examine the effects of heat-treatment on the microstructures of Cu-bearing HSLA steels. The details of microstructures were studied by using optical microscopy(OM), transmission electron microscopy(TEM) and hardness test. The as-rolled microstructure of HSLA-A consists of ferrite (${\alpha}$) whereas that of HSLA-B consists of needle-shaped phase. The difference in microstructure can be ascribed to the different amount of Ni, Mn, Mo, Cu which affect the hardenability. The austenite grain size is very small up to $1000^{\circ}C$ owing to the Nb-precipitates. As the austenitizing temperature increases above $1000^{\circ}C$, the austenite grain grows rapidly. There are two hardness peaks in the hardness versus temperature curve, at $500^{\circ}C$ and at $675^{\circ}C$ (HSLA-A), $725^{\circ}C$ (HSLA-B). The peak at $500^{\circ}C$ result from the formation of Cu-precipitates and second hardness peak is created due to the formation of M-A constituents. The hardriess decrease in HSLA-B steel with ageing temperature is small because of the higher amounts of Cu than HSLA-A steel. The fine, round ${\varepsilon}$-Cu precipitates grow with ageing temperature and finally transform into rod shape.

• Current Optics and Photonics
• /
• v.5 no.3
• /
• pp.243-249
• /
• 2021

In this paper, the sensing characteristics of a double cladding fiber (DCF) long-period fiber grating (LPFG) to the surrounding refractive index (SRI) are studied. The outer cladding of the DCF plays the role of the overlay, thus, the mode transition (MT) phenomenon of DCF can be induced by etching the outer cladding radius instead of coating overlays. The response characteristics of the effective refractive index (ERI) of the cladding mode to the outer cladding radius are analyzed. It is found that in the MT range, the change rate of ERIs of cladding modes is relatively larger than that for other ranges. Further, based on the features of the mode transition region (MTR), the phase-matching curve of the 11^th cladding mode is investigated, and the response of the DCF-LPFG to the SRI is characterized by the change of wavelength intervals between the dual peaks under different outer cladding radii. The numerical simulation results show that the SRI sensitivity is greatly improved, which is available to 3484.0 nm/RIU with the fitting degree 0.998 in the SRI range of 1.33-1.37. The proposed DCF-LPFG can provide new theoretical support for designing the DCF-LPFG refractive index sensor with excellent performances of sensitivity, linearity and structure.

• Journal of Surface Science and Engineering
• /
• v.55 no.3
• /
• pp.143-155
• /
• 2022

Ceramic oxide layers successfully were formed on the surface of cast Al alloys with high Si contents using plasma electrolytic oxidation (PEO) process in electrolytes containing Na₂SiO₃, NaOH, and additives. The microstructure of the oxide layers was systematically analyzed using scanning electron microscopy (SEM), cross-sectional transmission electron microscopy (TEM), X-ray diffraction patterns (XRD), and energy X-ray dispersive spectroscopy (EDS). XRD analysis indicated that the PEO untreated high-silicon Al alloys (i.e., 17.1 and 11.7 wt.% Si) consist of Al, Si and Al₂Cu phases whereas Al₂Cu phase selectively disappeared after PEO treatment. PEO process yielded an amorphous oxide layer with few second phases including γ-Al₂O₃ and Fe-rich phases. The corrosion behaviors of high-silicon Al alloys treated by PEO process were investigated using electrochemical impedance spectroscopy (EIS) and other electrochemical techniques (i.e., open circuit potential and polarization curve). Electroanalytical studies indicated that high-silicon Al alloys treated by PEO process have greater corrosion resistance than high-silicon alloys untreated by PEO process.

• Journal of Surface Science and Engineering
• /
• v.56 no.4
• /
• pp.250-258
• /
• 2023

Ceramic oxide layer was formed on the surface of high silicon aluminum alloy by using PEO (plasma electrolytic oxidation) process. The microstructure of the oxide layer was analyzed using scanning electron microscopy (SEM) and x-ray diffraction patterns (XRD). The high silicon aluminum alloy prior to PEO process consists of Al, Si and Al₂Cu phases in XRD analysis, whereas Al₂Cu phase selectively disappeared after PEO treatment. Considerable decrease of relative intensity in most of peaks in XRD results of the high silicon aluminum alloy treated by PEO process was observed. It may be attributed to the formation of amorphous phases after PEO treatment. The corrosion behavior of the high silicon aluminum alloy treated by PEO process was investigated using electrochemical impedance spectroscopy (EIS) and other electrochemical techniques (i.e., open circuit potential and polarization curve). Electroanalytical studies indicated that the high silicon aluminum alloy treated by PEO process shows greater corrosion resistance than that untreated by PEO process.