Journal of the Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회논문지)

The Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회)
권호 표지
DOI QR코드

DOI QR Code

Effect of Lead Free Glass Frit Compositions on Properties of Ag System Conductor and RuO2 Based Resistor Pastes

Ag계 도체 및 RuO2계 저항체 페이스트의 특성에 미치는 무연계 글라스 프릿트 조성의 영향

  • Koo, Bon-Keup (Division of Advanced Materials Engineering, Hanbat National University)
  • Received : 2010.07.27
  • Accepted : 2011.02.16
  • Published : 2011.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

Abstract: The effect of lead free glass frit compositions on the properties of thick film conductor and resistor pastes were investigated. Two types lead free frits, HBF-A(without $Bi_2O_3$) and HBF-B(with $Bi_2O_3$) were made from $SiO_2$, $B_2O_3$, $Al_2O_3$, CaO, MgO, $Na_2O$, $K_2O$, ZnO, MnO, $ZrO_2$, $Bi_2O_3$. And Ag based conductor pastes and $RuO_2$ based resistor paste were prepared by mixed with these frits and functional phase(Ag and $RuO_2$), and organic vehicle. The properties of thick film conductor and resistor sintered at $850^{\circ}C$ were studied after printing on $Al_2O_3$ substrate. The morphology of the sintered films surface were SEM and EDS were carried out to analysis the chemical composition on resistor surface and state of Ru atom in frit matrix.

Keywords

References

  1. P. J. Holmes and R. G. Loasby, Handbook of Thick Film Technology, (Electrochemical Pub. Limited) 97 (1976).
  2. L. C. Hoffman, J. Am. Ceram. Bull, 63, 572 (1984).
  3. C. S. McCANDLISH and A. L. Dow, J. Am. Ceram. Bull, 64 (1985).
  4. R. W. Vest, J. Am. Ceram. Bull, 65, 631 (1986).
  5. A. Kshirsagar, S. Rane, U. Mulik, D. Amalnerkar, Mater. Chem. Phys, 101, 492 (2007). https://doi.org/10.1016/j.matchemphys.2006.08.009
  6. S. Rane, M. Prudenziati, B. Morten, Mater. Lett, 61, 595 (2007). https://doi.org/10.1016/j.matlet.2006.05.015
  7. S. Rane, M. Prudenziati, B. Morten, L. Golonka, A. Dziedzic, J. Mater. Sci. Mater. Electron, 16, 687 (2005). https://doi.org/10.1007/s10854-005-3747-5
  8. S. Jagtap, S. Rane, R. Aiyer, and D. Amalnerkar, Current Applied Physics, 10, 1156 (2010). https://doi.org/10.1016/j.cap.2010.02.003
  9. C. C. Sartain, J. Non-Crystall. Solid. 5, 55 (1970). https://doi.org/10.1016/0022-3093(70)90196-1
  10. G. H. Pick, C. H. Seager, J. Appl. Phys., 48, 5152 (1977). https://doi.org/10.1063/1.323595
  11. H. G. Kim, B. K. Koo, T. H. No, Report of the Korea Ministry of Commerce, Industry and Energy, B17-951-3304-03-2-3, 22 (1998).
  12. B. K. Koo, H. G. Kim, J. Kor. Ceram. Soc, 25, 623 (1988).
  13. Y. S. Chung and H. G. Kim, IEEE Trans. CHMT, 11, 195 (1988).
  14. P. J. Holmes and R. G. Loasby, Handbook of Thick Film Technology (Electrochemical Pub. Limited, 1976) p. 142.
  15. P. J. Holmes and R. G. Loasby, Handbook of Thick Film Technology (Electrochemical Pub. Limited, 1976) p.111.

Cited by

  1. Effect of Screen Printing and Sintering Conditions on Properties of Thick Film Resistor on AlN Substrate vol.51, pp.4, 2014, https://doi.org/10.4191/kcers.2014.51.4.344