• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.20 no.1
• /
• pp.37-42
• /
• 1984

This paper deals with the characterics of the stability of uncontinuous plate structures with cracks. The relation between the J-intergal of the cracks existing in the stress-concentrated regions and local strain are investigated experimentally and theoretically. The BEM(boundary element method)analysis and test results lead to the follow conclusions: 1. A non-dimensional J was computed in a plate stress and strain condition for several kind of loads and crack types. The J design curves are defined as follows: J sub(E)/$\sigma$ sub(y) super(2) a=3.345(e/e sub(y) ) super(2) at e/e sub(y)$\leq$1 J sub(E)/$\sigma$ sub(y) super(2) a=3.345(e/e sub(y) ) at e/e sub(y)$\geq$1 2. Use of this curve provides a good estimation for the uncontinuous plate structures with cracks existing in the stress and strain concentrated region. 3. The stability of the characteristics is mainly depenent upon not the length of cracks but the type of the cracks.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2012.11a
• /
• pp.104-105
• /
• 2012

The temperature dependence of the effective magnetic anisotropy constant K(T) of ferrite nanoparticles is obtained based on the measurements of SQUID magnetometry. For this end, a very simple but intuitive and direct method for determining the temperature dependence of anisotropy constant K(T) in nanoparticles is introduced in this study. The anisotropy constant at a given temperature is determined by associating the particle size distribution f(r) with the anisotropy energy barrier distribution $f_A(T)$. In order to estimate the particle size distribution f(r), the first quadrant part of the hysteresis loop is fitted to the classical Langevin function weight-averaged with the log?normal distribution, slightly modified from the original Chantrell's distribution function. In order to get an anisotropy energy barrier distribution $f_A(T)$, the temperature dependence of magnetization decay $M_{TD}$ of the sample is measured. For this measurement, the sample is cooled from room temperature to 5 K in a magnetic field of 100 G. Then the applied field is turned off and the remanent magnetization is measured on stepwise increasing the temperature. And the energy barrier distribution $f_A(T)$ is obtained by differentiating the magnetization decay curve at any temperature. It decreases with increasing temperature and finally vanishes when all the particles in the sample are unblocked. As a next step, a relation between r and $T_B$ is determined from the particle size distribution f(r) and the anisotropy energy barrier distribution $f_A(T)$. Under the simple assumption that the superparamagnetic fraction of cumulative area in particle size distribution at a temperature is equal to the fraction of anisotropy energy barrier overcome at that temperature in the anisotropy energy barrier distribution, we can get a relation between r and $T_B$, from which the temperature dependence of the magnetic anisotropy constant was determined, as is represented in the inset of Fig. 1. Substituting the values of r and $T_B$ into the $N{\acute{e}}el$-Arrhenius equation with the attempt time fixed to $10^{-9}s$ and measuring time being 100 s which is suitable for conventional magnetic measurement, the anisotropy constant K(T) is estimated as a function of temperature (Fig. 1). As an example, the resultant effective magnetic anisotropy constant K(T) of manganese ferrite decreases with increasing temperature from $8.5{\times}10^4J/m^3$ at 5 K to $0.35{\times}10^4J/m^3$ at 125 K. The reported value for K in the literatures is $0.25{\times}10^4J/m^3$. The anisotropy constant at low temperature region is far more than one order of magnitude larger than that at 125 K, indicative of the effects of inter?particle interaction, which is more pronounced for smaller particles.

• Journal of Korea Water Resources Association
• /
• v.30 no.2
• /
• pp.165-175
• /
• 1997

This is to study the characteristics of available water resources (AWR) of the eastern coastal area in Korea. A rating curve was suggested at Yangyang water level station of the Yangyangnamdai river. Annual mean precipitation of this area is 1365.8mm. Annual mean precipitation in central and northern area of eastern coastal area is more than that of southern area because of orographic precipitation occurred by the north-easterly air flow from the East sea. By the correlation analysis of monthly rainfall depths between rainfall gauging stations it is presented that the rainfall gauging stations located in coastal region have the regional representativity, but the rainfall gauging stations located in the westward of mountains have a strong locality. AWR of eastern coastal area by the application of runoff coefficient 0.665 is 1134.5X106m3 and 28.6 percentage for total water resources. In each watershed AWR is 193.7X106m3 in the Yangyangnamdai river, 109X106m3 in the Kangnungnamdai river, and 146.0X106m3 in the Samcheokosip river. The seasonal changes of 30/3% in summer and 19.1% in water, and those of the AWR to total water resources are 86.3% in winter, 60.1% in spring, 50.1% in autumn, and 25.7% in summer. The results of this study may be used to establish the water resources planning of eastern coastal area.

• Food Science of Animal Resources
• /
• v.36 no.5
• /
• pp.665-670
• /
• 2016

The objectives of this study were conducted to characterize pepsin-soluble collagen (PSC) extracted from bones (PSC-B), skins (PSC-S), and tendons (PSC-T) of duck feet and to determine their thermal and structural properties, for better practical application of each part of duck feet as a novel source for collagen. PSC was extracted from each part of duck feet by using 0.5 M acetic acid containing 5% (w/w) pepsin. Electrophoretic patterns showed that the ratio between α₁ and α₂ chains, which are subunit polypeptides forming collagen triple helix, was approximately 1:1 in all PSCs of duck feet. PSC-B had slightly higher molecular weights for α₁ and α₂ chains than PSC-S and PSC-T. From the results of differential scanning calorimetry (DSC), higher onset (beginning point of melting) and peak temperatures (maximum point of curve) were found at PSC-B compared to PSC-S and PSC-T (p<0.05). Fourier transform infrared spectroscopy (FT-IR) presented that PSC-S and PSC-T had similar intermolecular structures and chemical bonds, whereas PSC-B exhibited slight difference in amide A region. Irregular dense sheet-like films linked by random-coiled filaments were observed similarly. Our findings indicate that PSCs of duck feet might be characterized similarly as a mixture of collagen type I and II and suggest that duck feet could be used for collagen extraction without deboning and/or separation processes.

• Korean journal of applied entomology
• /
• v.13 no.1 s.18
• /
• pp.25-31
• /
• 1974

This survey was aimed to accumulate basic data of aphid population at the Horticultural Experiment Station at Suweon. The yellow pan traps were setted at five locations (Fig.1.), and ran from May 1 to October 31. 1970. About one hundred and twenty species of aphids were trapped, including 24 species of plant vims vectors. Of these, dominant species were as follows: (Asterisk shows virus vector) Aphid species No. of catches * Aphis spiraecola PATCH 2,635, * Aphis craccivora KOCH 2,377, * Myzus persicae SULXER 2,111, Capitophorus hippophaes javanicus H.R. LAMBERS 2,051, Anoecia fulviabdominalis SASAKI 1,480, * Aphis gossypii GLOVER 867, * Macrosiphum avenae FABRICIUS 859, Cervaphis quercus TAKAHASHI 692, * Lipaphis erysimi KALTENBACH 645, Pleotrichophorus chrysanthemi THEOBALD 489, The above 10 species consisted $76.5\%$ of total catches and the 24 vector species consisted $55.5\%$. The curve of the seasonal occurrence of flying aphids at Horticultural Experiment Station shows bimodal, typical for the temperate region. The total number of trapped aphids at the Station from May to September, 1970, were less than that of average yearly catches at the College of Agriculture from 1967 to 1970. Thi, low numbers at Horticultural Experiment Station may attribute to the frequent spraying of insecticides from Spring to Summer on growing crops there. But the aphids population increase suddenly in the middle of October. This might be resulted from cease of insecticide applications and migration of aphids from summer host to winter host plants.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.15 no.1
• /
• pp.30-39
• /
• 2016

Students receiving plan is not based on short-term indicators, such as student-centered, student-induced factor to address school needs new complaint, it is necessary to establish the school in the center of a long-term (30 years) perspective. Therefore, analysis of Cheongju students can examine the entire 30 years of the elementary school in this study are as follows: First, given the increasing number of students in seven models and presented the case to its types. Second, considering the geographical characteristics and the development of regional characteristics classify 55 elementary Schools in Cheongju City by dividing the number of students increase or decrease trend to 10 zones the results are as follows: Students Number increasing school group of 4 schools, 15 schools students Number fell in shot Term, the Students Number dropped in middle Term 26 schools, 10 was a small school. In particular, it is urgently necessary to establish measures for these small schools. Third, despite the reduced number of students indicated in the analysis result, caused the social conflict factors by excessive new school requirements. It also caused a number of students from schools when the Curve of Students Number are to remain flat or decline. It shows that no additional new demand of School in the region. Fourth, the number of students increasing trend forecasting model

• Progress in Medical Physics
• /
• v.13 no.1
• /
• pp.1-8
• /
• 2002

Accurate knowledge of the distribution of contamination electrons ( which comes from mainly gantry head by Compton scattering, pair production, and tray: henceforth called leptons ) at the surface and in the first centimeters of tissue is essential for the clinical practice of radiation oncology. Such lepton tends to reduce or eliminate the ‘skin-sparing’ advantage of megavoltage photon beam radiotherapy, This information is needed to prescribe a absorbed dose to a skin volume at a few millimeter depth in high energy therapeutic radiation photon beam All experiments were done with 15 MV photon beam from a dual energy linear accelerator (Clinac 1800, Varian). Field size is defined by ranged from 10.0$\times$10.0 to 30.0$\times$30.0 $\textrm{cm}^2$. The absorbed dose and distribution of leptons in therapeutic radiation beam (15 MV) are investigated by means of variable blocked beams of 30.0$\times$30.0 $\textrm{cm}^2$ and dose beam profiles partly removed leptons with a copper plate. A numerous leptons mainly are distributed as shape of broad cone in the central photon beam and leptons path length in the water are shorter than 2.5 cm because of the leptons energy having around 3.0 MeV. These results clearly appears that the subtraction of leptons from the total depth dose curve not only lower the absolute dose in the buildup region and surface dose, it also causes a shift of d$_{max}$ to a deeper depth.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.148-156
• /
• 2018

The integrity assessment of the bridge behavior is generalized by field data of a static load-deformation curve and dynamic properties such as impact factors and natural frequencies. Evaluating it with numerical analysis is a reasonable method. The results of the mockup test and the numerical analysis are corresponded with each other since the behavior of service load proceeds in elastic region. In case of the dynamic behavior of structure, especially for the analysis of vibration, the result of the mockup test differs from the result of numerical analysis a little due to the geometric shape and non-homogeneous materials. In order to converge on these tolerances, this study suggested several numerical models, analyzed the sensitivity and finally offered a practical modeling method for the estimation of bridge on the basis of the result of mockup test. Based on the model substituted concrete section for strands section, the natural frequency of the model composed with axial stiffness of strands or the model applied the modified modulus of elasticity was closest with the result of the mockup test.

• Analytical Science and Technology
• /
• v.15 no.6
• /
• pp.514-520
• /
• 2002

The electrothermal vaporization (ETV) hollow cathode glow discharge atomic emission spectrometer for analysis of liquid sample has been developed and characterized. This system has improved the sample introduction method of electrothermal vaporization and the hollow cathode glow discharge. The sample introduction method was possible to provide high analyte transport efficiency to the plasma by helix coil made of tungsten material. In addition, small volume samples (<$30{\mu}{\ell}$) could be used. The system has glow discharge cell with special design for improvement of precision. The effect of discharge parameters such as discharge power, gas flow rate has been studied to find optimum condition. The emitted light was effectively carried into detector by fiber optic cable in UV region. The calibration curve of Pb, Cd were obtained with 3 samples.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3006-3013
• /
• 2015

Flat tube heat exchangers can improve the thermal performance significantly compared with round tube heat exchangers. For proper design of flat tube heat exchangers, one should know the tubeside heat transfer coefficients. In this study, convective boiling heat transfer coefficients of R-410A were obtained in a flat extruded aluminum tube with $D_h=1.41mm$. The test range covered mass flux from 200 to $600kg/m^2s$, heat flux from 5 to $15kW/m^2$ and saturation temperature from $5^{\circ}C$ to $15^{\circ}C$. The heat transfer coefficient curve shows a decreasing trend after a certain quality(critical quality). The critical quality decreases as the heat flux increases, and as the mass flux decreases. The early dryout at a high heat flux results in a unique 'cross-over' of the heat transfer coefficient curves. The heat transfer coefficient increases as the mass flux increases. At a low quality region, however, the effect of mass flux is not prominent. The heat transfer coefficient increases as the saturation temperature increases. The effect of saturation temperature, however, diminishes as the heat flux decreases. Both the Shah and the Kaew-On et al. correlations reasonably predicted the present data.