• 한국정밀공학회지
• /
• 제16권4호통권97호
• /
• pp.71-78
• /
• 1999

The determination of the optimum biarc curve passing through a given set of points along involute curve is studied. The method adopted is that of finding the optimum number of span and the optimum length of the span such that error between the biarc curve and involute curve minimum. Iterative method is effectively used to find the optimim number and length of the span on involute curve with reduced length of NC-code.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.578-582
• /
• 2005

In this study, the conceptual foundation and development process of the Antecedent soil Moisture Condition(AMC) in SCS runoff curve number method are reviewed. Although the runoff volume is very sensitive with AMC condition, the AMC class limits developed in SCS(1972) are used in rainfall-runoff analysis without careful consideration. Tn this study, following the SCS curve number development process, rainfall-runoff characteristics of the Jang-Pyung subbasin subject to the Pyung-Chang River basin are analyzed to evaluate the reasonability of the AMC class limits at present. The New AMC class limits are proposed by the sensitive analysis of the antecedent rainfall - curve number value. As a result, the classification value of AMC-I with II is 22mm of antecedent 5-day rainfall amount, and the classification of AMC-II with III is 117mm in growing season. When the New AMC class limits are applied to Jang-Pyung subbasin, AMC probability distribution shows that the AMC-II has increased remarkably even though the AMC-I has a little higher value. But the AMC-III has the smallest one. According to the conceptual basis of the curve number method, the AMC probability distribution, the New AMC class limits adopted, gives reasonable results.

• 물과 미래
• /
• 제24권2호
• /
• pp.97-108
• /
• 1991

유역의 수문학적 토양피복형으로부터 유역 또는 합성곡선번호를, 강우-유출기록으로부터 관측곡선 번호를, 관측곡선번호의 중앙치로서 중위유선번호를 산정하였다. 유출기록을 기준으로 평가할 경우 AMC-II조건의 CN-II에 의하면 과소하게, AMC-III조건의 CN-III에 의하면 과대하게 유효강우량이 산정된다. 따라서 유효강우량산정의 개선방안으로 CN-II와 CN-III의 중간값인 조정곡선번호가 정의될 수 있다. 중위곡선번호에 의하여 산정된 유출이 관측치에 가장 근접하게 되는 점을 감안하면 계측유역의 대표곡선번호로서 중위곡선번호가 사용될 수 있다.

• 한국정밀공학회지
• /
• 제16권9호
• /
• pp.48-53
• /
• 1999

In this paper, a practical method for design and machining of cycloid gear was investigated. Based on the proposed method, a systematic program was developed for automatically designing the tooth profiles of epicycloid and hypocycloid gears for the case fo one difference between the number of teeth of cycloid gear and the number coordinates of tooth profiles and pressure angles. The error analysis between cycloid curve and Biarc curve was performed to show the effective method of equidistant partitioning of cycloid curve so that efficient method of Biarc curve fitting was also proposed for the partitioned curve.

• Korean Journal of Hydrosciences
• /
• 제4권
• /
• pp.21-32
• /
• 1993

The estimates of both runoff depth and peak runoff by the basin runoff curve numbers, which are CN-II for antecedent moisture condition- II and CN -III for antecedent moisture condition-III, obtained from hydrological soil-cover complexes of 26 watersheds are investigated by making use of the observed curve numbers, which are median curve number and optimum curve number, computed from 250 rainfall-runoff records. For gaged basins the median curve numbers are recommended for the estimation of both runoff depth and peak runoff. For ungaged basin, found is that for the estimate of runoff depth CN-II is adequate and for peak runoff CN-II is suitable. Also investigated is the variation of the runoff curves during storms. By the variable runoff curve numbers, the prediction of runoff depth and peak runoff can be improved slightly.

• 한국수자원학회논문집
• /
• 제36권4호
• /
• pp.633-645
• /
• 2003

GIS기법과 원격탐사 기법은 수문학의 지형자료 구축과 응용 분야에 활발하게 이용되고 있으며 다방면에서 많은 연구가 진행 중이다. 본 연구에서는 산악지역에서 토양 특성과 토지 피복 상태에 따라 유출 특성이 어떻게 나타나는지를 CN값을 산정하여 평가 하였다. 토지 피복 분류에 신경망 기법을 사용하여 보다 적합한 분류 방법을 모색하고자 했고, CN값 산정을 위한 연산에 GIS기법출 사용하였다. 우선 샘플지역을 선정하여 토지 피복의 정확도를 평가하면, 기존의 최우도법(80.9%)과 신경망 기법(84.1%)에서 신경망 기법 분류 결과가 상대적으로 우수하므로 신경망 기법으로 토지 피복을 분류하였다. 그리고 SCS방법으로 토양도를 이용하여 AMC-II 조건하에서 CN값을 산정하면 수작업 토지이용도는 55, 신경망 분류 토지 피복도는 57로 비슷한 결과로 나타났다. 이를 토대로 전체 유역에 대해서 신경망 기법으로 분류한 토지 피복도를 사용하여 CN값을 산정하여 적용함으로써 타당성을 증명했다. 앞으로 신경망 기법을 이용한 토지 피복 분류와 GIS기법의 적용으로 보다 정확하고 신속한 CN값 산정이 가능할 것으로 사료된다.

• 한국CDE학회논문집
• /
• 제11권1호
• /
• pp.1-10
• /
• 2006

This paper addresses B-spline curve approximation of a set of ordered points to a specified toterance. The important issue in this problem is to reduce the number of control points while keeping the desired accuracy in the resulting B-spline curve. In this paper we propose a new method for error-bounded B-spline curve approximation based on adaptive selection of dominant points. The method first selects from the given points initial dominant points that govern the overall shape of the point set. It then computes a knot vector using the dominant points and performs B-spline curve fitting to all the given points. If the fitted B-spline curve cannot approximate the points within the tolerance, the method selects more points as dominant points and repeats the curve fitting process. The knots are determined in each step by averaging the parameters of the dominant points. The resulting curve is a piecewise B-spline curve of order (degree+1) p with $C^{(p-2)}$ continuity at each knot. The shape index of a point set is introduced to facilitate the dominant point selection during the iterative curve fitting process. Compared with previous methods for error-bounded B-spline curve approximation, the proposed method requires much less control points to approximate the given point set with the desired shape fidelity. Some experimental results demonstrate its usefulness and quality.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.719-723
• /
• 2002

The purpose of this study is to suggest the correlation of single-number ratings for sound insulation by floor impact. As a assessment method of impact sound insulation. we selected the IIC contour of ISO, A weighted sound level. Inverse A-weighting curve and L-Index of japanese industrial standard. And we estimated the single-number ratings by application the measured data of impact sound level to each method. The results showed that the coefficients of determination between each two single-number ratings were very high (more than 0.9169). And In the condition of same assessment method, the coefficient of determination for light-weight impact sound was higher than that for heavy-weight impact sound.

• 대한전자공학회논문지
• /
• 제26권12호
• /
• pp.1984-1994
• /
• 1989

Techniques for approximating digitalcurves by polygonal lines are a valuable tool for image analysis and data compression. S. Shilien proposed a method for segmenting a digital curve into digital straight line segments digital straight line segments which are not satisfied with the structural properties, and have more than one break point by Shilien's method. Here, the structural representation of digital straight lines and digital staight line segments is described. And a method for segmenting a digital curve into digital straight line segments which are not satisfied with the structural properties, and have more than one break point by Shilien's method. Here, the structural representation of digital straight lines and digital staight line segments is described. And a method for segmenting a digital curve into digital straight line segments which may be not satisfied with the structural properties is proposed. The number of break points extracted by this method is less than that by S. Shilien's method from the digital curve which includes the digital straight line segments not satisfied with the structural properties.

• Structural Engineering and Mechanics
• /
• 제34권1호
• /
• pp.85-95
• /
• 2010

In this paper, numerical solution of the singular integral equation for the multiple curved branch-cracks is investigated. If some quadrature rule is used, one difficult point in the problem is to balance the number of unknowns and equations in the solution. This difficult point was overcome by taking the following steps: (a) to place a point dislocation at the intersecting point of branches, (b) to use the curve length method to covert the integral on the curve to an integral on the real axis, (c) to use the semi-open quadrature rule in the integration. After taking these steps, the number of the unknowns is equal to the number of the resulting algebraic equations. This is a particular advantage of the suggested method. In addition, accurate results for the stress intensity factors (SIFs) at crack tips have been found in a numerical example. Finally, several numerical examples are given to illustrate the efficiency of the method presented.