• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.9
• /
• pp.1309-1316
• /
• 2017

As penetration level of Distributed Generations (DGs) on weak distribution networks gets higher, voltage rise problem can often occur due to reverse power which is not expected in conventional distribution networks. It, however, cannot be effectively solved by using conventional voltage regulating devices such as On-Load Tap Changers (OLTCs), Step Voltage Regulators (SVRs) because those do not consider the presence of DGs when determining relevant setting parameter for voltage regulation. This paper presents a scheme for voltage regulation using coordinated control between OLTC and DGs which can actively participate in the regulation. The scheme decides which device should be operated first based on the characteristics of regulating devices, in order to prevent unnecessary operation of output changes of DG and excessive tap changing operation of OLTC. Computer simulations considering daily irradiation of PV and load curve are performed by using MATLAB Simulink and performance comparison between the presented scheme and conventional ones is also made. It can be concluded from simulation results that the scheme presented is very effective to regulate voltages in distribution networks with multiple DGs.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.1
• /
• pp.11-15
• /
• 2011

In this paper, a methodology for the power control of a wind turbine, which is the variable-speed and variable-pitch (VSVP) control system, is introduced. This control methodology maximizes the capability of the turbine to extract maximum power from the wind in the regions with low wind speeds. Further, it regulates the wind-turbine power as the rated power in the case of the regions with high wind speeds. A simple drive train model is used to design the VSVP control system. The methodology for VSVP control is mechanized by controlling the generator torque and blade pitch. Finally, some simulation results for the VSVP control to a MW wind turbine are discussed in this paper.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.3
• /
• pp.241-251
• /
• 2017

Computational fluid dynamics analysis was performed for the case 3 of the EFD-CFD workshop. Solvers were used for three commercial CFD codes(Star-CCM+, Fluent and CFX) and an open source CFD code(SU2). The grid were generated four types depending on the total cells using commercial grid generation code(Pointwise). Mach number of 0.4 and 0.8, 2 degree angle of attack and Mach number of 0.9, 1 degree angle of attack were calculated. Similar pressure coefficient curve and normal force coefficient were showed from the coarse grid to fine grid of four codes. But there is a difference in the drag coefficient. The position of the shock wave was predicted forward as the discretization order increased in calculations using Star-CCM+ and Fluent. The computation time to converge, Fluent, Star-CCM +, CFX are in order, and SU2 takes much time to converge.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.105-110
• /
• 2001

It has recently been raised main issue how solve the problem of insufficient energy. One of the solution is to increase the thermal efficiency of power generation system. For the purpose of high efficiency, it is necessary to increase the steam temperature and pressure. So, the use of modified $9{\sim}12%Cr$ steel having superior creep rupture strength and oxidation resistance is required to endure such severe environment. The evaluation of creep properties of those heat resistance material is very important to secure the reliability of high temperature and pressure structural components. Since creep properties are determined by microstructural change such as carbide precipitation and coarsening, It is certain that there are some relationship between creep properties and hardness affected by microstructure. In this study, SP-Creep ruptured test for newly developed 9Cr steel being used as boiler valve material was performed, and creep properties of the material were evaluated. Also, hardness test were performed and hardness results were related to the creep properties such as LMP and creep strength to verify the availability of SP-Creep test as creep test method.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.4
• /
• pp.1519-1524
• /
• 2012

Background: Human papillomavirus (HPV) infection is the main cause of cervical cancer. Limited epidemiologic data of HPV prevalence are available for women attending hospitals in southern China. This study aimed to evaluate the profiles of HPV infection and cytology status in gynecological outpatients in Chaozhou City. Methods: A total of 2833 eligible women were enrolled. The HPV GenoArray test was used for HPV detection and genotyping. Nearly one half of the HPV positive women received liquid-based cytology test. Logistic regression analysis was performed to assess the predictable effects of age and genotype for categories of abnormal cytology. Results: The prevalence of overall, high-risk, and low-risk HPV infection were 24.5%, 19.5% and 8.4%, respectively. A U-shaped age-specific prevalence curve was observed in overall HPV and high-risk HPV, but not in low-risk HPV, which declined with age increasing. The 6 most common high-risk HPV type in descending order, were types 52, 16, 58, 18, 68, and 33. Age and HPV genotype were both important determinants of abnormal cytology incidence, the older women (>45 years) and those infected with HPV type 16 and/or 18 having the highest risk for abnormal cytology. Conclusion: Our findings support the hypothesis that second-generation HPV prophylactic vaccines including HPV-52 and -58 may offer higher protection for women residing in Chaozhou and neighboring cities in Guangdong.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.11
• /
• pp.6899-6903
• /
• 2013

Background: Prevalence is a statistic of primary interest in public health. In the absence of good follow-up facilities, it is difficult to assess the complete prevalence of cancer for a given registry area. Objective: An attempt was here made to arrive at complete prevalence including limited duration prevalence with respect to selected sites of cancer for India by fitting appropriate models to 1, 3 and 5 years cancer survival data available for selected population-based registries. Materials and Methods: Survival data, available for the registries of Bhopal, Chennai, Karunagappally, and Mumbai was pooled to generate survival for breast, cervix, ovary, lung, stomach and mouth cancers. With the available data on survival for 1, 3 and 5 years, a model was fitted and the survival curve was extended beyond 5 years (up to 35 years) for each of the selected sites. This helped in generation of survival proportions by single year and thereby survival of cancer cases. With the help of survival proportions available year-wise and the incidence, prevalence figures were arrived for selected cancer sites and for selected periods. Results: The prevalence to incidence ratio (PI ratio) stabilized after a certain duration for all the cancer sites showing that from the knowledge of incidence, the prevalence can be calculated. The stabilized P/I ratios for the cancer sites of breast, cervix, ovary, stomach, lung, mouth and for life time was observed to be 4.90, 5.33, 2.75, 1.40, 1.37, 4.04 and 3.42 respectively. Conclusions: The validity of the model approach to calculate prevalence could be demonstrated with the help of survival data of Barshi registry for cervix cancer, available for the period 1988-2006.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.9
• /
• pp.99-109
• /
• 2016

This paper presents a method for generating spatiotemporal images to detect the leukocyte motions in a microvessel. By using the constraint that the leukocytes move along the contour line of a blood vessel wall, the method detects leukocyte motions and then generates spatiotemporal images. the translational motion by a movement in vivo is removed first by the template matching method. Next, a blood vessel region is detected by the automatic threshold selection method to binarize the temporal variance image, then a blood vessel wall's contour is expressed by B-spline function. With the detected blood vessel wall's contour as an initial curve, the plasma layer of the best accurate position is determined to be the spatial axis by snake. Finally, the spatiotemporal images are generated. The experimental results show the spatiotemporal images are generated effectively through the comparison of each step of three image sequences.

• Journal of Energy Engineering
• /
• v.2 no.2
• /
• pp.200-207
• /
• 1993

A methanol reformer was designed and fabricated using a CuO-ZnO low temperature shift catalyst, and its operation characteristics have been studied for the phosphoric acid fuel cell (PAFC) power generation system. The type of reactor was annular Methanol was consumed both for heating and for reforming fuel. Contents of carbon monoxide produced from the reformer increased as the reaction temperatures increased, but decreased as the mole ratios of water to methanol(H$_2$O/CH$_3$OH) increased. At steady state operating conditional, temperature profile of the catalytic reactor of the reformer was well coincide with the model equation, and it took 50 minutes from start to the rated condition of the reformer. When the system was operated at 4/4 and 1/4 of load, thermal efficiencies of the system were 72.3% and 77%, respectively. When the PAFC system was operated with reformed gas in the range of 62 V-37.6 V and 0-147 A, the trend of I-V curve showed a typical fuel tell characteristic. At steady state condition, the flow rates of reforming and combustion methanol were 88.1 mol/h and 50.1 mol/h, respectively.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.6
• /
• pp.127-135
• /
• 2005

In order to analyze effects of strain rate on consolidation characteristics of Busan clay, a series of constant rate of strain (CRS) consolidation tests with different strain rate and incremental loading tests (ILT) were performed. From experimental test results on Busan clay, it was found that the preconsolidation pressure was dependent on the corresponding strain rate occurring during consolidation process. Also, consolidation curves normalized with respect to preconsolidation pressure gave a unique stress-strain curve. Coefficient of consolidation and permeability estimated from CRS test had a tendency to converge to a certain value at normally consolidated range regardless of strain rate. An increase in excess pore pressure was observed after the end of loading without change of total stress on the incremental loading test, which phenomenon is called Mandel-Cryer effect. It was also found that rapid generation of excess pore pressure took place due to collapse of soil structure as effective stress approached to preconsolidation pressure.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.14
• /
• pp.5681-5684
• /
• 2014

Objective: Prevalence is a statistic of primary interest in public health. In the absence of good follow-up facilities, it is often difficult to assess the complete prevalence of cancer for a given registry area. An attempt is made to arrive at the complete prevalence including limited duration prevalence with respect of selected sites of cancer for India by fitting appropriate models to 1, 3 and 5 year cancer survival data available for selected registries of India. Methodology: Cancer survival data, available for the registries of Bhopal, Chennai, Karunagappally, and Mumbai was pooled to generate survival for the selected cancer sites. With the available data on survival for 1, 3 and 5 years, a model was fitted and the survival curve was extended beyond 5 years (up to 30 years) for each of the selected sites. This helped in generation of survival proportions by single year and thereby survival of cancer cases. With the help of estimated survived cases available year wise and the incidence, the prevalence figures were arrived for selected cancer sites and for selected periods. In our previous paper, we have dealt with the cancer sites of breast, cervix, ovary, lung, stomach and mouth (Takiar and Jayant, 2013). Results: The prevalence to incidence ratio (PI ratio) was calculated for 30 years duration for all the selected cancer sites using the model approach showing that from the knowledge of incidence and P/I ratio, the prevalence can be calculated. The validity of the approach was shown in our previous paper (Takiar and Jayant, 2013). The P/I ratios for the cancer sites of lip, tongue, oral cavity, hypopharynx, oesophagus, larynx, nhl, colon, prostate, lymphoid leukemia, myeloid leukemia were observed to be 10.26, 4.15, 5.89, 2.81, 1.87, 5.43, 5.48, 5.24, 4.61, 3.42 and 2.65, respectively. Conclusion: Cancer prevalence can be readily estimated with use of survival and incidence data.