• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 F
• /
• pp.2638-2640
• /
• 1999

This paper proposes a current-fed type high frequency inverter using a soft switching technology Zero-Voltage-Switching to reduce turn on and off loss at the switching. The analysis of the proposed circuit was described by using normalized parameter and operating characteristics have been evaluated as to switching frequency and parameters. In the future, the proposed circuit is considered to be useful for induction heating applications.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.348-351
• /
• 2001

In this paper, voltage-fed high frequency resonant inverter of instantaneous current phaser control method used to DC voltage source separated is proposed. In the output control method, a novel circuit type of phase shift driving signal method with CVCF illustrated, also the operation principle of the proposed circuit is described in detail and its characteristics are presented as to normalized parameters. According to the each mode, in order to the circuit analysis and characteristic evaluation of the state equation are derives and present used to normalized parameter. In the future, this proposed inverter show that it can be practically used as power source system for the lighting equipment of discharge lamp, DC-DC converter etc.

• 대한지역사회영양학회지
• /
• 제3권3호
• /
• pp.430-439
• /
• 1998

This study was performed to investigate the nutritional status of neurosurgical tube-fed patients. The objective of this study was to improve the nutrition management of tube-fed patients. The current practices of tube feeding and enteral nutrition formula as for 95 patients in the hospital were examined by reviewing patients charts, and interviewing patients, nurses and their family members. The results are summarized as follows ; 57.9% of patients that received the formula showed a decrease in mental status. Among the subjects, 55.7% had nervous system diseases due to old age. Most of the tube-fed patients were hospitalized in the emergency room and while hospitalized, the status of their respiratory organ was abnormal. The method of tube-feeding was by Bolus injection and the type of the tube was a 16Fr size silicone tube. The amount of the injection per day while tube-feeding was on average 1424kcal for men and 1322kcal for women and the calories per day ranged from 1000-1500kcal(50.5%). The injection volume averaged 332.7ml and 45% of patients received more than 300ml per injection. The tube feeding intake rate was 127.9ml/min with 50% of subjects in the range of 50-100ml/min and 10% at 20ml/min. The longer the hospitalization, the older age, coma status, and the higher tube feeding rate, the more decreased were the biochemical parameters.

• 대한전기학회논문지
• /
• 제41권3호
• /
• pp.244-252
• /
• 1992

This paper describes a reactive power compensator using current-source delta modulation converter, which compensates the reactive power in the ac sides of 3-phase rectifier. In the conventional current control methods for the current-type reactive power compensators, it is usual to compare the reactive reference current signal with the triangular wave and hence to generate the ON-OFF signals for the reactive power compensator. To improve the response as well as the control capability, the delta modulated current control technique is used in this paper. As a result, the input power factor is improved close to unity and both simulation and experimental results show good compensating performances.

• 대한전자공학회논문지
• /
• 제22권3호
• /
• pp.54-59
• /
• 1985

DC-DC콘버어터의 한가지 회로방식으로서 검토되고 있는 전류형 DC-DC콘버어터는 지금까지의 연구에 의하여 종래의 회로방식에 비하여 안정성이 가장 우수한 회로방식이란 점이 명백해졌다. 본 색에서는 스위칭 주파수의 고주파화에 의해 평활콘덴서의 용량을 축소시킬 수 있다는 점을 전제로하여, 부환회로에 위상지연 요소가 존재하고 평골콘덴서의 등가직렬저항을 고려한 경우, 안정성과 평활콘덴서의 용량과의 관계를 해석에 의해 명백히 하였다. 그 결과 전류형 DC-DC콘버어터는 평활콘덴서의 용량을 축소한 경우에도 통상의 강압형콘버터에 비하여 높은 안정성을 갖는 반면, 출력전압의 리풀이 출력전류의 증가에 따라서 증가하여 이것에 의하여 실용상의 한계가 존재한다는 점이 명백해졌다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.82-92
• /
• 2011

This paper presents a PFC(Power Factor Correction) system to control the power factor of input current of the converter system which is working in the propulsion system of KTX high speed train. In the KTX train system, initially introduced from ALSTOM, the thyristor converter with phase controlling technique is adopted in the current fed type powering system. The input current induces harmonic losses highly because the waveform becomes rectangular shapes according to the filter inductor current increased as the train speed increasing gradually. Especially the interference with the signalling systems is severe concerned due to high current harmonics on the catenary line. To protect this problem, a frequency trap filter(notch filter) is operating with the input converter system. In this paper, an analysis work and PC simulation have been done on the PFC system to upgrade its performance and maintenance efficiency.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.581-586
• /
• 2000

Gas metal arc welding(GMAW) uses a continuously fed electrode as a filler metal. The arc is shielded from atmospheric contamination by an inert gas active or inert/active gas mixture delivered through the welding gun and cable assembly. The recent research topics on $CO_2$ are welding machines are focused mainly on the reduction method of generated spatter by using new type consumable electrode metal or inverter control method. The various current waveform control methods have been researched for welding performance improvement. Until now current waveform control methods reduce to spatter occurred by instantaneous short circuiting,. but these methods is drawback that no reduce spatter occurred by arc reignition. In this paper the previous arc reignition current control method for welding performance improvement of inverter arc welding machine is studied and compared the various current control methods with the previous arc reignition current control method.

• Journal of Power Electronics
• /
• 제4권2호
• /
• pp.77-86
• /
• 2004

This paper presents a novel three-phase power module bridge type auxiliary resonant AC link snubber for the three-phase voltage-fed sinwave soft switching PWM inverter operating under specific instantaneous space voltage vector modulation. The operating principle of this resonant snubber is described for current source load model during one switching period, along with its design approach based on the simulation data. The performance evaluations of space vector modulation three-phase sinewave soft switching inverter with a new three-phase active auxiliary resonant AC link snubber are discussed as compared with those of three-phase voltage source-fed sinewave hard switching PWM inverter with a standard space voltage vector modulation strategy. The power loss analysis and conventional efficiency estimation of three-phase soft switching PWM inverter using ICBT modules are carried out including all the conduction power losses based upon the measured v-i characteristics of IGBT and its antiparallel diode as well as their switching losses.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2003년도 학술대회논문집
• /
• pp.311-314
• /
• 2003

In this paper, proposed circuit proposes that Active-Clamp-Circuits basis of a current-fed inverter linked type high frequency resonant dc-dc converter of conventional. and the paper the most of characteristics of the reduced high voltage stress main switches with active clamp circuits and output current constant with the resonant part consists of L, C resonant tank circuit. Also, the capacitor (C$_1$, C$_2$) connected in switches are a common using by resonance capacitor and ZVS capacitor. and circuit analysis used state equation of each part modes. Also we conform a rightfulness theoretical analysis by comparing a parameters values and simulation values obtained from simulation using Power MOS-FET as switching devices.

• 한국정보전자통신기술학회논문지
• /
• 제12권1호
• /
• pp.99-105
• /
• 2019

전기 자동차의 배터리 충전용 OBC는 주로 PFC회로와 절연형 DC-DC 컨버터 회로를 포함한 2단으로 구성된다. 일반적으로 PFC 회로로는 구조가 간단한 비절연형 부스트 컨버터가 사용되고, 절연형 DC-DC 컨버터로는 ZVS(Zero Voltage Switching)가 가능한 공진형 컨버터가 이용되고 있다. 전기자동차의 주행거리 증가에 따른 넓은 배터리 출력에 대응하기 위해서는 OBC의 넓은 출력범위가 필요하지만, 이러한 시스템 회로 구성에서는 ZVS를 위한 회로설계의 한계와 제어기 구성이 복잡해지기 때문에 배터리 충전에 요구되는 넓은 범위의 출력에 효과적으로 대응하기에는 어려움이 있다. 본 논문에서는 절연형 전류원 방식의 PFC 회로와 벅 DC-DC 컨버터로 구성된 OBC를 제안하였다. 제안된 OBC는 회로 및 제어기 구성이 용이하고, 넓은 출력범위에 대한 대응이 가능하다. 제안된 회로의 유효성을 검증하기 위해 3.3㎾급 시작품을 제작 하였으며, 동작결과 출력전압 150V~400V에서 동작안정성 및 정격 부하 조건에서 최대 효율 94.4%, 최대 역률 99.2%를 확인하였다.