• Current Research on Agriculture and Life Sciences
• /
• v.9
• /
• pp.1-9
• /
• 1991

Bulbs of two introduced garlic cultivars, Sanghae-joseng and Spain strain, were purchased in a market and anatomical characteristics of them were investigated according to the weight of individual bulbs. The materials used were planted and grown in the field. Bulbs harvested were classified according to weight and their anatomical characteristics were recorded. 1. In both cultivars the larger the bulb, the more flat the bulb shape. 2. The bigger the bulbs were, the larger the number of cloves per bulb was, Spain strain had more cloves per bulb than Sanghae-joseng in the same size bulbs. 3. In Sanghae-joseng, more cloves were formed in outer layer than in inner layer in the bulbs produced in 1990. But more cloves were formed in inner layer in the bulbs of 35 g or smaller produced in 1991. In Spain strain, more cloves were formed in inner layer in the bulbs of 40 g or more produced in 1990. But more cloves were formed in outer layer in the bulbs produced in 1991 regardless of bulb size. In both cultivars, the number of primary cloves and total number of cloves was very small in both cultivars, but it was a little bigger in Sanghae-joseng than in spain strain. 5. In the bulbs produced in both 1990 and 1991 of Spain strain and in bulbs produced in 1990 of Sanghae-joseng weight of cloves in outer layer was significantly heavier than that in outer layer, the trend was not conspicuous in 1991 produce of Sanghae-joseng. 6. In both cultivars clove size range was narrow in small bulbs and wide in large bulbs. In distribution of cloves in size, medium ones were most frequent, and the frequency of large cloves increased with increased size of bulbs. Sanghae-joseng produced larger cloves than Spain strain in the same size cloves.

• Korean Journal of Environment and Ecology
• /
• v.22 no.3
• /
• pp.309-319
• /
• 2008

Roads are an indicator of anthropogenic activity causing ecosystem disturbances and often lead to habitat fragmentation, habitat loss, and habitat isolation. The Hallasan National Park(153.4$km^2$) on Jeju Island being distinguished for its unique geology, topography, and biota has also been designated as a core area of UNESCO Man and the Biosphere(MAB) Reserve. Although the high conservation value of this park has contributed to a rapid growth of tourists and road construction, landscape changes due to roads have not been examined yet. We used GIS systems to examine the fragmentation pattern caused by roads, in relation to its zonation, elevation, and vegetation. When a buffer was applied to roads(112m width for paved roads and 60m width for both legal and illegal trails), the park consisted of 100 fragments. The ten fragments generated after applying buffer to only paved roads and legal trails ranged from $0.002km^2$ to $38.2km^2$ with a mean of $14.2km^2$, and about 7% of both nature conservation zone and nature environment zone of the park were edge. Fragments in both east and west ends of the park and around the summit exhibited relatively high shape indices with means of 5.19(for 100 fragments) and 7.22(for 10 fragments). All five legal trails are connected to the pit crater of the mountain and vegetation changed from broadleaf forests and conifer forests to grasslands with elevation, consequently resulting in dramatic fragment size reduction in grasslands at high elevation, in particular above 1,400m, where endemic and alpine plants are abundant. These results show that in Hallasan National Park the risks of habitat deterioration and habitat loss due to fragmentation may be more severe in the nature conservation zone dominated by Baengnokdam than in the nature environment zone. Therefore, current road networks of the park appear to fall short of the goal of the national park for ecosystem conservation and protection. Considering that the entire Hallasan National Park also serves as a MAB core area, conservation efforts should focus, first of all, on park rezoning and road management to mitigate habitat fragmentation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.1
• /
• pp.16-21
• /
• 2011

Purpose: The purpose of this study was to investigate the bioactivity of precalcified nanotubular $TiO_2$ layer on Ti-6Al-7Nb alloy. Materials and methods: Anodic oxidation was carried out at a potential of 20 V and current density of 20 mA/$cm^2$ for 1 hour. The glycerol solution containing 1 wt% $NH_4F$ and 20 wt% deionized water was used as an electrolyte. Precalcification treatment was obtained by soaking in $Na_2HPO_4$ solution at $80^{\circ}C$ for 30 minutes followed by soaking in saturated $Ca(OH)_2$ solution at $100^{\circ}C$ for 30 minutes, followed by heat treatment at $500^{\circ}C$ for 2 hours. To evaluate the activity of precalcified nanotubular $TiO_2$ layer, specimens were immersed in a simulated body fluid with pH 7.4 at $36.5^{\circ}C$ for 10 days. Results: 1. Nanotubular $TiO_2$ layer showed the highly ordered dense structure by interposing small diameter nanotubes between large ones, the shape of nanotubes was enlarged as going down. 2. The mean length of nanotubes was $517.0{\pm}23.2\;nm$ innm glycerol solution containing 1 wt% $NH_4F$ and 20 wt% $H_2O$ at 20 V for 1 hour. 3. The bioactivity of Ti-6Al-7Nb alloy was improved with formation of nanotubular $TiO_2$ layer and precalcification treatment in $80^{\circ}C$ 0.5 M $Na_2HPO_4$ and saturated $100^{\circ}C$ $Ca(OH)_2$ solution. Conclusion: Bioactivity of precalcified nanotubular $TiO_2$ layer on Ti-6Al-7Nb alloy was improved.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.3
• /
• pp.13-19
• /
• 2018

The soldering property of Pb-containing solder(Sn-Pb) and Pb-free solders(Sn-3.0Ag-0.5Cu and Sn-1.0Ag-0.7Cu-1.6Bi-0.2In) for solar combiner box module was compared. The solar combiner box module was composed of voltage and current detecting modules, diode modules, and other modules. In this study, solder paste printability, printing shape inspection, solder joint property, X-ray inspection, and shear force measurements were conducted. For optimization of Pb-free soldering process, step 1 and 2 were divided. In the step 1 process, the printability of Pb-containing and Pb-free solder alloys were estimated by using printing inspector. Then, the relationship between void percentages and shear force has been estimated. Overall, the property of Pb-containing solder was better than two Pb-free solders. In the step 2 process, the property of reflow soldering for the Pb-free solders was evaluated with different reflow peak temperatures. As the peak temperature of the reflow process gradually increased, the void percentage decreased by 2 to 4%, but the shear force did not significantly depend on the reflow peak temperature by a deviation of about 0.5 kgf. Among different surface finishes on PCB, ENIG surface finish was better than OSP and Pb-free solder surface finishes in terms of shear force. In the thermal shock reliability test of the solar combiner box module with a Pb-free solder and OSP surface finish, the change rate of electrical property of the module was almost unchanged within a 0.3% range and the module had a relatively good electrical property after 500 thermal shock cycles.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.298-298
• /
• 2014

Quantum dot infrared photodetectors (QDIPs) based on Stranski-Krastanov (SK) quantum dots (QDs) have been widely explored for improved device performance using various designs of heterostructures. However, one of the biggest limitations of this approach is the "pancake" shape of the dot, with a base of 20-30 nm and a height of 4-6 nm. This limits the 3D confinement in the quantum dot and reduces the ratio of normal incidence absorption to the off-axis absorption. One of the alternative growth modes to the formation of SK QDs is a sub-monolayer (SML) deposition technique, which can achieve a much higher density, smaller size, better uniformity, and has no wetting layer as compared to the SK growth mode. Due to the advantages of SML-QDs, the SML-QDIP design has attractive features such as increased normal incidence absorption, strong in-plane quantum confinement, and narrow spectral wavelength detection as compared with SK-DWELL. In this study, we report on the improved device performance of InAs/InGaAs SML-QDIP with different composition of $Al_xGa1-_xAs$ barrier. Two SML-QDIPs (x=0.07 for sample A and x=0.20 for sample B) are grown with the 4 stacks 0.3 ML InAs. It is investigated that sample A with a confinement-enhanced (CE) $Al_{0.22}Ga_{0.78}As$ barrier had a single peak at $7.8{\mu}m$ at 77 K. However, sample B with an $Al_{0.20}Ga_{0.80}As$ barrier had three peaks at (${\sim}3.5{\mu}m$, ${\sim}5{\mu}m$, ${\sim}7{\mu}m$) due to various quantum confined transitions. The measured peak responsivities (see Fig) are ~0.45 A/W (sample A, at $7.8{\mu}m$, $V_b=-0.4V$ bias) and ~1.3 A/W (sample B, at $7{\mu}m$, $V_b=-1.5V$ bias). At 77 K, sample A and B had a detectivity of $1.2{\times}10^{11}cm.Hz^{1/2}/W$ ($V_b=-0.4V$ bias) and $5.4{\times}10^{11}cm.Hz^{1/2}/W$ ($V_b=-1.5V$ bias), respectively. It is obvious that the higher $D^*$ of sample B (than sample A) is mainly due to the low dark current and high responsivity.

• Nuclear Medicine and Molecular Imaging
• /
• v.40 no.4
• /
• pp.228-232
• /
• 2006

Purpose: electrophilic $^{18}F(T_{1/2}=110\;min)$ radionuclide in the form of $[^{18}F]F_2$ gas is of great significance for labeling radiopharmaceuticals for positron omission tomography (PET). However, its production In high yield and with high specific radioactivity is still a challenge to overcome several problems on targetry. The aim of the present study was to develop a method suitable for the routine production of $[^{18}F]F_2$ for the electrophilic substitution reaction. Materials and Methods: The target was designed water-cooled aluminum target chamber system with a conical bore shape. Production of the elemental fluorine was carried out via the $^{18}O(p,n)^{18}F$ reaction using a two-step irradiation protocol. In the first irradiation, the target filled with highly enriched $^{18}O_2$ was irradiated with protons for $^{18}F$ production, which were adsorbed on the inner surface of target body. In the second irradiation, the mixed gas ($1%[^{19}F]F_2/Ar$) was leaded into the target chamber, fellowing a short irradiation of proton for isotopic exchange between the carrier-fluorine and the radiofluorine absorbed in the target chamber. Optimization of production was performed as the function of irradiation time, the beam current and $^{18}O_2$ loading pressure. Results: Production runs was performed under the following optimum conditions: The 1st irradiation for the nuclear reaction (15.0 bar of 97% enriched $^{18}O_2$, 13.2 MeV protons, 30 ${\mu}A$, 60-90 min irradiation), the recovery of enriched oxygen via cryogenic pumping; The 2nd irradiation for the recovery of absorbed radiofluorine (12.0 bar of 1% $[^{19}F]fluorine/argon$ gas, 13.2 MeV protons, 30 ${\mu}A$, 20-30 min irradiation) the recovery of $[^{18}F]fluorine$ for synthesis. The yield of $[^{18}F]fluorine$ at EOB (end of bombardment) was achieved around $34{\pm}6.0$ GBq (n>10). Conclusion: The production of $^{18}F$ electrophilic agent via $^{18}O(p,n)^{18}F$ reaction was much under investigation. Especially, an aluminum gas target was very advantageous for routine production of $[^{18}F]fluorine$. These results suggest the possibility to use $[^{18}F]F_2$ gas as a electrophilic substitution agent.

• Korean Journal of Ecology and Environment
• /
• v.44 no.1
• /
• pp.1-8
• /
• 2011

We investigated developmental stages of embryo and early life history of the Korean indigenous fish, the northern loach, Cobitis pacifica in 2009 in order to understand fundamental knowledges for conservation of this species. Eggs were obtained after hormones injections (LHRH-a, HCG) and were artificially fertilized by the dry method. The embryo was spherical, separative demersal, faint white, and averaged $1.09{\pm}0.04\;mm$ (n=20) in diameter. The hatching of the embryo took place in about 48 hours after fertilization under water temperature of $21.0{\sim}24.0^{\circ}C$ and the newly hatched larvae averaged $2.87{\pm}0.05\;mm$ (n=20) in total length (TL). Four days after hatching, the larvae grew up to $6.86{\pm}0.10\;mm$ (n=10) in TL and york sac absorption, mouth and anus opening were shown. Fourteen days after hatching, most of fin-rays appeared at $10.71{\pm}0.34\;mm$ (n=10) in TL and color spots on the body surface were attained. Twenty six days after hatching, the larvae grew up to $14.88{\pm}0.45\;mm$ (n=10) in TL, and all their fin-rays were formed. Therefore, according to current study regarding the morphological development of Cobitis pacidica, the conversion from larval to juvenile stages occurred at 26 days after hatching. Eighty days after hatching, the larvae were $33.3{\pm}1.25\;mm$ (n=10), and their body shape and color pattern were similar to adult fish. In this study, embryonic development and early life history of the northern loach, Cobitis pacifica show morphological characteristics of Cobitidae family. We expected that our results can be used as an fundamental knowledges for restoration study of indigenous fish species.

• Journal of the Korean association of regional geographers
• /
• v.5 no.2
• /
• pp.1-14
• /
• 1999

In the course of modernization and globalization, each region in Korea has experienced deep subordination to the center of Seoul and the increase of colonization possibility by world capital. In order to overcome the current situation, above all, the strategies should be developed focusing on daily life and life space. The basis for the development of strategies is the establishment of regional identity on life space. It is because of the reason that life space, or small-scale region has drawn wide attention in the research of geography in recent years. Especially, humanistic geography and new regional geography have developed the concerning theory and methodology, and kept going on the research of small-scale regions. Generally speaking, there have been quite large amount of theoretical discussions on small-scale region in recent years in the field of geography. Empirical researches focusing on a particular small-scale region, however, have been rarely made. It seems related to the deficiency of data materials and the obscurity of research framework of small-scale regional geography. A community paper must be very helpful for the geographic research on small-scale region. As community paper is published based on county('gun'), small or mid-size city('si'), or district of large city('gu'), it deals with small news and daily life information closely attached to the region. Accordingly, it functions as a medium of the formation of regional identity. It is also a valuable source material for the validation of regional identity and for the analysis of identity-shaping mechanism. The geographic interests in community paper, first of all, should be taken shape by the work on the geographical distribution and the periodic change of publication situation of community papers in Korea. Another research subject on community paper is the examination of characteristics of the region by analyzing the news and the advertisements. The news in community paper must be a valuable data source of regional studies in geography. Also, the regional identification process of community people through the community paper could be and should be explored, and how the regional centrality, or self-generation based on the identity is achieved will be an important subject.

• Korean Journal of Environment and Ecology
• /
• v.23 no.5
• /
• pp.431-438
• /
• 2009

The main purpose of this research is to prepare and provide basic materials for the propagational strategy of eelgrass by investigating on the morphological adaptation of Korean Zostera marina to ocean currents. An eelgrass plant mainly consists of rhizome, leaf sheath, leaves and roots. The rhizome is the horizontal stem of the plant that serves as the backbone from which the leaves and roots emerge. The leaf sheath is the bundle at the base of the leaves that holds the leaves together, protecting the meristem, the primary growth point of the shoot. Leaves originate from a meristem which is protected by a sheath at the actively growing end of the rhizome. As the shoot grows, the rhizome elongates, moving across or within the sediment, forming roots as it progresses. The aggregated leaves from the leaf sheath are found to have two cell layers on one side and multiple layers of airy tissues called aerenchyma on the other. The aerenchyma tissues are developed in multi-layered cell structures surrounding the veins which are formed in the leaf sheath. Generative shoots are made of rhizomes, which are circular or ovoidal, stem, and spathe and spadix. The transverse section of rhizome and the stem and central floral axis is found to be circular, ovoid and in the shape of convex respectively, and the vascular bundle, which is a part of transport system, has one large tube in the center and two small tubes on both sides. The layers of collenchyma cells numbered from 12 to 15 in the stem, and from 7 to 12 in the rhizome. The seed coat is composed of sclereids, small bundles of sclerenchyma tissues, which prevent the influx of sea water from the outside and help endure the environmental stress. In conclusion, alternative multi-layer structure in circular, convex type aggregated leaf base are interpreted to morphological adaption as doing tolerable elastic structure through movement of seawater. The generative shoots develop long slim stem and branches in circular or ovoidal shapes to minimize the adverse impacts of sea current, which can be interpreted as the plant's morphological adaptation to its environment.

• Korean Journal of Environment and Ecology
• /
• v.31 no.2
• /
• pp.252-265
• /
• 2017

This study aims to analyze the landscape ecological characteristics of green spaces within built up area of high density and evaluate the potential applicability of green patches, thereby introducing urban garden for generating green networks in residence areas. To this end, Yeoksam-Dong was selected as the site area since it is classified as both green initiative zone and alienated area of park service in Seoul. First, the current condition of green spaces in Yeoksam-Dong was identified by five categories: Street trees, private garden, public pocket garden, rooftop garden, and park. Then, the landscape index analysis through FRAGSTATS and connectivity assessment via multi-buffer zone analysis were carried out for analyzing the green networks and evaluating the potential value of green space. The results showed that the degree to which green areas in the site were distributed is arranged in the order of street tree, private garden, public pocket garden, park, and rooftop garden. In case of the street trees whose total core area (TCA, $1,618m^2$) is as high as the park's ($1,128m^2$). Private garden has potential for green network in built up area of high density by gardening since the shape of the patches are irregular (ED = 78.1m/ha) and the average distance among the patches is close (ENN=33.9m). Public pocket garden has also potential for gardening according to the result that it was found to be distributed evenly (LPI=5.7%, SHEI=0.9) with exposing external disturbance ($TCA=66m^2$). For the green network, 84% of all the study site is covered by small green network in 50m butter range of connected green area. The effect of green network was expected through gardening in public pocket garden (27%) and street tree (26%). Accordingly, it is encouraged to actively utilize street tree, private gardens, and rooftop gardens and to establish the urban gardens like local-based community gardens in public pocket garden where a variety of activities can be carried out near residential areas. By doing so, green networks can effectively be established in built up area with high density. The results of this study can contribute positively to fostering the creation of various types of urban gardens.