• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.581-582
• /
• 2010

This paper performed the basic study for developing the Photodynamic Therapy Equipment for medical treatment. We developed the equipment palpating cell proliferation using a high brightness LED. This equipment was fabricated using a micro-controller and a high brightness LED, and designed to enable us to control light irradiation time, intensity, frequency and so on. Especially, to control the light irradiation frequency, FPGA was used, and to control the change of output value, TLC5941 was used. Control stage is divided into 30 step by program. Consequently, the current value could be controlled by the change of level in Continue Wave(CW) and Pulse Width Modulation(PWM), and the output of a high brightness LED could be controlled stage by stage.

• The Journal of Information Technology
• /
• v.2 no.1
• /
• pp.53-64
• /
• 1999

Due to the trend that the wave of the information society is rapidly expanding on a global basis, the level of informatization is emerging as one of the important elements for national competitiveness. To take a competitive position for individuals, corporations, or states beyond their survival in the rapidly changing information environment, they should be able to manage and transmit various information with swiftness and security Today, the exchange of electronic documents or data, through PC which were unknown in the past is indispensable to the expansion of electronic commerce(EC) and eventually contributes to promoting the information society. The improvement of productivity and efficiency through the exchange of electronic documents or data has been recognized as a means to enhance the competitiveness of corporations and states. The United States, the European nations, Japan, and the newly industrialized countries such as Singapore and Taiwan, have been contriving the utilization of electronic documents and the expansion of EC on the strategical dimension of each nation. To activate the use of electronic documents, thus, the purpose of this study is to examine the current environment concerning the use of electronic documents, to investigate the related legal barriers, and to propose some suggestions for reforming the legal system.

• Korean Journal of Optics and Photonics
• /
• v.1 no.2
• /
• pp.155-161
• /
• 1990

A Continous wave tunable $CO_2$ laser which is the slow axial flow type was construccted for the optical pumping of methyl alcohol ($CH_3OH$) laser. The reflective grating of 100 grooveslmm and 10.6$\mu\textrm{m}$ blaze wavelength was used to select wavelength. We have investigated continous outpu: power characteristics, and then have compared tuned output power profile with the gain curve of $CO_2$ laser. The optimum condition for maxium power was found at the gas mixing ratio 1 : 3 : 10 for $CO_2: N_2$ and He. under this condition the flow rate, pressure of lasing gas and discharge current are 9.5 llmin. 14 torr, and 55 mA respectively. The maxium output power was 55 Wlm. Output power of single wavelength operation was measured on 60 individual rotation vibration transitions in the P and K branches of the 9.5$\mu\textrm{m}$ band and 10.4$\mu\textrm{m}$ band in $CO_2$. The output power profile obtained from each band is well consistent with the gain curve of $CO_2$ laser and maxium tuned output power was 20 watt.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.21 no.3
• /
• pp.748-754
• /
• 2007

Electroacupuncture is the combined treatment of mechanical and electric stimuli on the needle head, on which electricity runs after acupuncturing at the acupuncture points. It is reported that its treatment effect depends on the parameter of stimulus, which is wave of stimulus, frequency, voltage, and duration of electric current. To get the effective treatment, stimulus intensity over threshold is needed. We planned to experiment whether acupuncture effect is affected by sex, age, and weight. After we conducted electric stimulus at Zusanli(ST 36) which is known to increase small intestinal motility in normal rats, we observed the effects and got the following results. Though the increased effects of small intestinal motility of electro-acupuncture at Zusanli(ST 36) did not show the difference of sex, this effect was observed to have a tendency to decrease according to weight increase without distinction of sex. But the effect of electro-acupuncture shown in 4, 5, 7 weeks old without distinction of sex was observed to have a tendency to decrease with the growing of weeks-old in the male rat group. And the significant change without specific tendency was observed in the 4, 5 weeks old female rat group. This result suggested that sex, weight, and age should be considered to get the efficient electro-acupuncture. The more experimental study should be advanced to investigate the correlation between the factors that can affect the acupuncture treatment, and, afterward, the interconnection into the clinical use.

• Journal of Advanced Navigation Technology
• /
• v.10 no.3
• /
• pp.198-204
• /
• 2006

In this paper, TE(transverse electric) scattering problems by a resistive strip grating on a grounded dielectric plane according to the strip width and grating period, the relative permittivity and thickness of dielectric layer, and incident angles of a TE plane wave are analyzed by applying the FGMM(Fourier-Galerkin Moment Method) known as a numerical procedure. The induced surface current density is simply expanded in a Fourier series by using the exponential function as a simple function. The reflected power gets increased according as the relative permittivity and thickness of dielectric multilayers gets increased, the sharp variations of the reflected power are due to resonance effects were previously called wood's anomallies[7]. To verify the validity of the proposed method, the numerical results of normalized reflected power for the uniform resistivity R = 0 as a conductive strip case show in good agreement with those in the existing paper.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.862-865
• /
• 2008

Wireless energy supply for an MAV propulsion system using microwave was developed. This system consists of three sub system; the transmitter system, the rectenna system, and the tracking system. In the transmitter system five horn antennas were used as the antenna elements for the phased array system and both the beam divergence and steering angle was about 9deg. Eight rectennas were arrayed in parallel to obtain enough power to drive the electric motor on the MAV(the voltage was 250mV and the current was 6.8mA) in rectenna system. In tracking system two units of antenna system with leaf pattern which received the linearly-polarized wave despite the MAV yaw angle were set in each axis(x, y) for tracking an MAV in a 2-Dimentional space. And three output voltages $V_{com},\;V_1$ and $V_2$ were loaded in the PC to detect if the distance between transmitter and receiver was not constant. Finally when the microwave beam was steered by the phased array system the output voltage from rectenna was measured at 62cm while the MAV circled around above the transmitter system.

• Wind and Structures
• /
• v.18 no.4
• /
• pp.423-441
• /
• 2014

The high frequency base balance (HFBB) technique is a convenient and relatively fast wind tunnel testing technique for predicting wind-induced forces for tall building design. While modern tall building design has seen a number architecturally remarkable buildings constructed recently, the characteristics of those buildings are significantly different to those that were common when the HFBB technique was originally developed. In particular, the prediction of generalized forces for buildings with 3-dimensional mode shapes has a number of inherent uncertainties and challenges that need to be overcome to accurately predict building loads and responses. As an alternative to the more conventional application of general mode shape correction factors, an analysis methodology, referred to as the linear-mode-shape (LMS) method, has been recently developed to allow better estimates of the generalized forces by establishing a new set of centers at which the translational mode shapes are linear. The LMS method was initially evaluated and compared with the methods using mode shape correction factors for a rectangular building, which was wind tunnel tested in isolation in an open terrain for five incident wind angles at $22.5^{\circ}$ increments from $0^{\circ}$ to $90^{\circ}$. The results demonstrated that the LMS method provides more accurate predictions of the wind-induced loads and building responses than the application of mode shape correction factors. The LMS method was subsequently applied to a tall building project in Hong Kong. The building considered in the current study is located in a heavily developed business district and surrounded by tall buildings and mixed terrain. The HFBB results validated the versatility of the LMS method for the structural design of an actual tall building subjected to the varied wind characteristics caused by the surroundings. In comparison, the application of mode shape correction factors in the HFBB analysis did not directly take into account the influence of the site specific characteristics on the actual wind loads, hence their estimates of the building responses have a higher variability.

• Journal of Acupuncture Research
• /
• v.38 no.3
• /
• pp.205-218
• /
• 2021

Background: Korean medicine treatment was assessed in patients with knee osteoarthritis (OA) according to subgroups of: sex, age, cause of knee OA, body mass index, hospitalization period, history, OA compartment, phenotype, and comorbidity. Methods: A retrospective review was performed of 122 inpatients who were admitted to the Hospital of Korean Medicine for Korean medicine treatment of knee pain, and were diagnosed with knee OA based on magnetic resonance imaging findings. Analysis of patient subgroups (sex, age, cause of knee OA, body mass index, hospitalization period, history, OA compartment, phenotype, and comorbidity) was carried out and treatments including acupuncture, cupping, pharmacopuncture, herbal medicine, chuna therapy, medicinal steaming therapy, manual therapy, and extracorporeal shock wave therapy were listed. The numeric rating scale (NRS), Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), and 5-level EuroQol- 5 Dimension (EQ-5D-5L) scores were measured before and after treatment to assess the effects of treatment on pain and quality of life. Results: Seventeen males and 105 females were included in this study. Most patients were in their 60s. In the total study population, NRS, WOMAC, and EQ-5D-5L scores were improved statistically significant when comparing before and after treatment. The NRS and WOMAC scores improved statistically significant in the medial, patellofemoral, medial + patellofemoral, medial + lateral + patellofemoral compartment. Conclusion: Korean medicine treatment significantly reduced pain, stiffness, and physical dysfunction, and improved the quality of life of patients with knee OA, suggesting that it may be an effective alternative to the current conservative treatments.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.1
• /
• pp.49-57
• /
• 2021

In the production power transmitting of a floating production system like a wind offshore floating, the power cable should be connected from the surface system into the subsea system. The connection between the surface and the subsea system will make the power cable get a dynamic load like current and wave forces. Based on this condition, a dynamic power cable is required to endure external physical force and vibration in the long-term condition. It needs more requirements than static power cable for mechanical fatigue properties to prevent failures during operations in marine environments where the external and internal loads work continuously. As a process to verify, the durability test of dynamic power cables under the marine operation environment condition was carried out by using domestic technology development.

• Journal of Navigation and Port Research
• /
• v.45 no.3
• /
• pp.87-94
• /
• 2021

The IMO has adopted emission standards that strictly restrict the use of bunker C oil for vessels. Accordingly, research and bunkering pilot projects for LNG fueled ships are being actively carried out, which is expected to substantially reduce environmental pollution. In this study, we have adopted the turret moored Floating LNG Bunkering Terminal (FLBT) designed to receive the LNG from LNGCs and to transfer LNG to LNG bunkering shuttles in ship to ship moored condition. Numerical simulations have been performed with a 1-year return period of wind, wave, and current. Damping values of numerical model were adjusted from the results of model tests to obtain accurate simulation results. The results confirm safe berthing operation during the 1-year return period of environmental condition. Safety depends on the direction of environment, with increasingly stable operation facilitated by the application of heading-control function of FLBT to avoid beam-sea conditions.