• 제목/요약/키워드: Current Rate of Change

검색결과 625건 처리시간 0.034초

Wavelet 변환을 이용한 배전 계통의 고 저항 사고 검출 알고리즘 (A High Impedance Fault Detection Algorithm Using Wavelet Transform)

  • 남순열;강용철;김성수;손진만;박종근;정성일;김광호;김일동
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1997년도 하계학술대회 논문집 D
    • /
    • pp.975-978
    • /
    • 1997
  • This Paper presents a high impedance fault (HIF) detection algorithm of distribution systems using wavelet transform. Two HIFs on dry soil and sandy soil were simulated on various load conditions in 22.9 kV distribution systems using EMTP, and the current wavelets were decomposed by wavelet transform. The current root mean square(rms) change, the index change rate and the relative amplitude change were used as the multi-criteria for a HIF detection. The index change rate and the relative amplitude were made using the wavelet coefficients.

  • PDF

후포해빈에서 해안선의 장기변화 및 전연안표사량의 추정 (Long-Term Shoreline Change and Evaluation of Total Longshore Sediment Transport Rate on Hupo Beach)

  • 박일흠;이영권
    • 한국해양공학회지
    • /
    • 제21권4호
    • /
    • pp.15-20
    • /
    • 2007
  • The harbor siltation by longshore sediment transports has become a serious problem on the East Coast of Korea. A reasonable prediction of the longshore sediment rate is important to approach the siltation problem effectively. In the recently developed 1-line model, the empirical constants of the sediment transport formula, which include the absolute quantity of sediment transport rate and the spatial distribution of breaking wave height by wave deformation, are treated as calibration parameters. Since these constants should be determined by the very long-term shoreline data, the longshore sediment rates are much more reasonable values. The method was applied to Hupo Beach, which has experienced heavy siltation. The authors also discuss long-term shoreline change using aerial photos and the observed wave-induced current patterns. According to the result, the SW-direction sediment transport rate was $146,892m^3/year$, and the NE direction was $2,694,450m^3/year$ at Hupo Beach for the last 11 years. The siltation in Hupo Harbor might be affected by the NE-direction sediment transport from Hupo Beach.

인접한 스위치 온 타임 비교를 통한 SRM의 센서리스 제어 (Sensorless Control for Switched Reluctance Motor by Comparing Two Consecutive Switch-on times)

  • 양형열;김재혁
    • 조명전기설비학회논문지
    • /
    • 제24권4호
    • /
    • pp.185-191
    • /
    • 2010
  • 본 논문에서는 인덕턱스의 변화에 따른 전류 변화율을 모니터링 하여 회전자의 속도 및 위치를 추정하는 센서리스 구동방법을 제안한다. 전류의 변화율은 히스테리시스 전류제어 방법을 이용하여 인접한 두 스위치 온 타임을 비교함으로써 간단히 측정할 수 있다. 제안된 방법은 복잡한 계산이나 별도의 하드웨어를 필요치 않으므로 구현이 용이하다. 시뮬레이션과 실험 결과는 제안한 방법의 실효성을 보여준다.

BLDC 전동기에서 PWM 방식에 따른 토크리플 저감에 관한 연구 (A Study for Torque Ripple Reduction with PWM Pattern on Brushless DC Motor During Commutation)

  • 김상훈;권경준
    • 산업기술연구
    • /
    • 제24권A호
    • /
    • pp.109-117
    • /
    • 2004
  • This paper presents a current control strategy to reduce torque ripple of Brushless DC Motor in commutation period with PWM pattern. The torque ripple is mainly caused by the inequality in the rate of change between rising current and decaying one during commutation. And also it is influenced by the shape of real back EMF. Therefore, in the proposed control strategy, considering real back EMF a compensation voltage is generated to equalize the rate of change in these commutating currents. And then, by providing the compensation voltage in commutation period with PWM pattern, the torque ripple can be reduced. The simulation and experimental results verify that the proposed method can reduce the torque and the current ripples significantly.

  • PDF

소방펌프의 운전상태에 따른 유도전동기의 이상 신호 분석 (Analysis of Abnormal Signals for Induction Motor according to Operating Status of Fire Pumps)

  • 구본휴;김두현;김성철
    • 한국안전학회지
    • /
    • 제37권4호
    • /
    • pp.20-27
    • /
    • 2022
  • This article aims to develop an algorithm that detects fire pump defects by analyzing the current signals of an induction motor, which are triggered by changes in the flow rate and pressure of multistage volute pumps that are used for fire services. The operational status of the pumps was categorized into three: first, normal operation; second, a defect that is caused by a change in the current value; and third, a defect occasioned by a change in current, pressure, and flow rate. When a fire pump was in normal operation, the motor's operating current was measured between 5.06 A and 6.9 A, the flow rate was estimated at 0-0.27 m3/min, and the pressure ranged from 0 to 0.47 MPa. In the event that a defect was caused by an abnormal current value in the motor, it was attributed to the pump's adherence. Furthermore, if there was no source of water, the defect was considered to have been induced by phase-loss operation, no-load operation, or run-stop operation, with the current value of each scenario being measured at > 52.8 A, < 4.13 A, > 45.15 A, and < 3.8 A, respectively, placing its overall range between 0 and 50 A. The sources of defects were detected based on an analysis of the flow rate, pressure, and current, which represent the following causes: air inflow into the casing, inadequate suction of water, and reverse-phase operation, respectively. Each cause entailed the following values: when air seeped into the casing, the pressure was measured at 0.24 MPa irrespective of changes in the flow rate; when there was inadequate suction of water, the pressure was recorded between 0 and 0.05 MPa despite changes in the flow rate; and when the power line's reverse-phase loss was the cause of the defect, the pressure was measured at 0.33 MPa for a flow rate of 0 L/min, and a higher flow rate decreased the pressure to nearly 0 MPa. The results of this study will enable engineers to develop a pump defect detection algorithm that is based on an analysis of current, and this algorithm will facilitate the execution of a program that will control a fire pump defect detection system.

Brushless DC Motor에서 토크리플 저감을 위한 전환 구간에서의 전류제어 기법 (A Current Control Strategy for Torque Ripple Reduction on Brushless DC Motor during Commutation)

  • 권경준;김상훈
    • 전력전자학회논문지
    • /
    • 제9권3호
    • /
    • pp.195-202
    • /
    • 2004
  • 본 연구에서는 Brushless DC Motor의 전환구간에서 토크리플 저감을 위한 전류제어 기법을 제안하였다. 전환구간에서 토크리플은 증가하는 전류의 변화율과 감소하는 전류의 변화율이 같지 않음에 주원인이 있고, 실제 역기전력의 모양에 의해서도 영향을 받는다. 이에 제안된 제어기법은 전환하는 전류들의 변화율을 같게 하는 실제 역기전력이 고려된 보상전압을 추하고, 전환구간동안에만 보상전압을 인가함으로써 토크리플을 줄이는 것이다. 시뮬레이션과 실험 결과는 제안된 방법이 토크와 전류의 리플을 현저히 줄일 수 있음을 보여준다.

의학교육의 변화 관리 (Brining a Change in Medical Education)

  • 전우택
    • 의학교육논단
    • /
    • 제13권1호
    • /
    • pp.3-11
    • /
    • 2011
  • Every medical school aims to provide better education, and it sometimes requires changing the current education system. However, an attempt for a change may not always be successful. In many cases, it is so not because an intended change was not properly directed but because conflicts in the process of adopting the change were not properly handled. This paper suggests seven points for how to successfully bring a change in medical education. First, the medical education should not simply focus on the pass rate of the national medical examination but also on the cultivation of creative leaders. Second, the faculty of medical school should be creative, self-motivated, and passionate. Third, people in charge of an intended change should have a good understanding of complicated dynamics between the dean's office, medical education experts, professors, and students. Fourth, people who are leading the change should also grasp the possibility that a well-intended change might not be well-received by professors, students, and dean due to their tendency to be complacent with the current system. Fifth, a successful introduction of a change requires good teamwork of a thinker, an actor, and a coordinator. Sixth, a change takes time as it takes place through a step-by-step process. Seventh, an attempt for a change accompanies a negotiation with professors with different thoughts and views regarding education, and people who want a change need to be flexible in that negotiation. In addition to these seven points, people who are responsible for a change should be consistent and consider the renown of the school.

한의학 치료율 제고 방안에 관한 연구 (Treatment Rate-up Methods in the Oriental Medicine)

  • 이선동
    • 대한예방한의학회지
    • /
    • 제3권1호
    • /
    • pp.35-54
    • /
    • 1999
  • This thesis shows about the meaning of treatment rate increasing, the current treated level and the reason of low treatment rate and increasing methods. 1. Treatment rate incresing means high treat level within short time, keeping treatment effect for a long time as well as raising treatment rate. 2. The current by diseases each others completed treatment rate of oriental medicine is 14.0% to 89.7%$(mean:\;{\pm}40.0%)$. Therefore the rate is show too low. 3. The reasons of low treatment rate; low academic level of oriental, academic limitation, clinic and prevention problem of oriental medicine, lack of medical approch suitable for current diseases and symptoms, mostly incurrable diseases using oriental medicine, lack of preventive education, disappropriate medical service and nonspecialty of the treatment, etc. 4. The next methods for incresing the treatment rate must be improved; such as accurate establishment of process that diagnosis symptoms and treats them, system research of microdiagnosis, positive treatment with medicine and nonmedicine method at the same time, appropriate subdivision and actualization of clinical basic research, research of dose and response, diversity of treatment methods and forms, development of treatment service and prevention based on health level, enormous change as cure medicine and opening-up of new disease field, specialization of medical examination, reinforcement of public medical part and herbal drugs use with same origin, mental and pysical stability of patients, accurate extract and oral drinking ways, etc.

  • PDF

고집적 DRAM 셀에 대한 소프트 에러율 (Soft Error Rate for High Density DRAM Cell)

  • 이경호;신형순
    • 대한전자공학회논문지SD
    • /
    • 제38권2호
    • /
    • pp.87-94
    • /
    • 2001
  • DRAM에서 셀 캐패시터의 누설 전류 영향을 고려하여 소프트 에러율을 예측하였다. DRAM의 동작 과정에서 누설 전류의 영향으로 셀 캐패시터는 전하량이 감소하고, 이에 따른 소프트 에러율을 DRAM의 각 동작 모드에 대하여 계산하였다. 누설 전류가 작을 경우에는 /bit mode가 소프트 에러에 취약했지만, 누설전류가 커질수록 memory 모드가 소프트 에러에 가장 취약함을 보였다. 실제 256M급 DRAM의 구조에 적용하여, 셀 캐패시턴스, bit line 캐패시턴스, sense amplifier의 입력 전압 감도들이 변화할 때 소프트 에러에 미치는 영향을 예측하였고, 이 결과들은 차세대 DARM 연구의 최적 셀 설계에 이용될 수 있다.

  • PDF