• 한국실내디자인학회논문집
• /
• 제23권6호
• /
• pp.195-203
• /
• 2014

This study selects factors affecting form type of hospital architecture by considering studies and references on hospital architecture type in korea and other countries in general. Also this study classifies general hospitals chronologically and analyzes type change of general hospitals in relation with periodic change of healthcare environment. Through this, this study aims to analyze chronological change of general hospitals' form type and provide the current of hospital architecture's general type. The form type classification of this study is classification according to the form of ward, classification according to the relationship between ward and D.T.D(Diagnostic and Treatment department), classification according to the relationship between O.P.D(Out Patient department) and D.T.D, classification according to the rate of centralization, classification according to the circulation system. The form type of ward changed from plate type to tower type, and the circulation system of ward changed from middle corridor to double corridor, the number of Team Nursing chaged from 1 to 2 in 1990. On the other hand the chage of others classifications took place from 1990' to 2010'. It is judged that this overall change is appeared by a change from an inpatien-oriented system to an outpatient-oriented system followed by an increase in number of outpatients, an increase in amenities in ground floor and adoption of healing environment for patients and visitors.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권2호
• /
• pp.229-236
• /
• 1995

Multimedia has created a system environment that needs a combination of diverse peripherals, faster I/O, and easier configuration. The sheer volume of data one can expect with multimedia hardware and applications storage systems of higher capacity and faster data transfer rate. Unlike the magneto-optical(MO)disk technology which uses bias magnetic field in writing, both the reading and the writing in the phase change (PC) technology are performed only by laser light. In PC optical media, an active layer is reversibly converted between amorphous state and crystalline state by changing irradiation conditions of focused laser beam. Thus, as compared with MO disk, the PC disk has such great advantages that signals can be reproduced by change of reflectance of laser beams in the same manner as the compact disc. The reflectivity of a phase-change spot can be altered in a single pass under the head only through modulation of laser power. The principles and the current status of phase-change optical recording media combined with possible applications are discussed in the present article.

• 디자인학연구
• /
• 제19권3호
• /
• pp.117-130
• /
• 2006

This paper analyzed the current status of universal design in the Republic of Korea (Korea) and Japan. In the case of Japan, the aged society or the super aged society has been preparing from 1985 when the aging rate was 10%. Japan's activity to prepare it became promoted during 1990's when per capita Gross National Income (GNI) was $$20,000{\sim}40,000$. In Korea, the preparation for the aging society such as physical environment, barrier free buildings or traffic systems, economic support and investigation or survey is not yet sufficient. Korea must start preparation for an aged society, possibly and quickly. And it needs to prepare until 2026, when the aging rate will be 20%. To prepare a barrier free and an aged society must consider both aging and economic status.

• 대한전기학회논문지
• /
• 제32권8호
• /
• pp.277-283
• /
• 1983

The pulse generating circuit system of the so-called turbulently-heated theta pinch is experimentally investigated, and its results are compared with the predictions based on the conventional theory. The conventional theory assumes that the impedance of the pinch coil is independent on the time rate of change in voltage (or current) across the pinch coil. The experimental pulse height of the voltage actross the pinch coil is about 1.5% fo that predicted by the conventional theory.

• Korean Chemical Engineering Research
• /
• 제56권2호
• /
• pp.151-155
• /
• 2018

고분자전해질 연료전지(PEMFC)의 고분자막 열화정도는 주로 수소투과전류밀도로 평가한다. 수소투과전류밀도는 선형주사전압전류측정법(Linear Sweep Voltammetry, LSV)으로 측정하는데 DOE프로토콜과 NEDO프로토콜이 분석방법에 차이가 있다. 본 연구에서는 PEMFC 구동 및 가속 열화 시험 과정에서 두 프로토콜을 적용해 수소투과 전류밀도를 비교하였다. DOE 방법에 의한 LSV 방법에서는 주사속도(scan rate) 변화가 수소투과 전류밀도에 영향을 주지만 NEDO 방법에서는 주사속도가 수소투과전류밀도에 영향을 주지 않았다. 고분자막 가습/건조 15,000사이클 평가과정에서 DOE 방법은 막의 열화를 민감하게 측정하였으나 NEDO방법은 DOE방법에 비해 막의 열화가 덜 민감하게 나타났다.

• 한국치위생학회지
• /
• 제8권3호
• /
• pp.161-175
• /
• 2008

With the change of medical environment, people are taking interest not just in treatment but in the prevention of oral diseases. As people's interest in oral diseases increases, the number of dental institutions is increasing continuously and this is heightening the necessity and importance of professional dental hygienists equipped with expert knowledge of oral health. Thus the present study purposed to survey and analyze the current state and weight of works carried out by dental hygienists, and to propose dental hygienists' works desirable in the medical environment changing its focus from treatment to prevention. The results of this study are as follows; 1. In the results of dividing dental hygienists' works into oral examination and preliminary examination, preventive works, assistance to dental treatment, oral health education, hospital administration and management, and surveying the performance rate of these works, the work of the highest performance rate in preliminary examination was collection of patients' systemic history (87.6%). It was also scaling (96.9%) in preventive dental treatment, preparation for treatment (96.5%) in assistance to dental treatment, education on the toothbrushing method (92.3%) in oral health education, and tool disinfection and management (72.2%) in hospital administration and management. 2. When the performance rate was surveyed according to age, institution, and work experience, the performance rate by work area was highest in dental hygienists aged between 27~28, those working at a dental clinic, and those with 4~6 years' work experience. 3. The weight of dental hygienists' works was high in order of assistance to dental treatment (59.1%), observation of oral health condition and preliminary examination (12.4%), oral health education (12.4%), hospital administration and management (10.4%), and preventive dental treatment (5.8%), but in the results of surveying perception on the importance of works, the importance was high in order of oral health education (34.7%), preventive dental treatment (29.0%), observation of oral health condition and preliminary examination (19.3%), assistance to dental treatment (11.2%), and hospital administration and management (5.8%), showing that the weight of works carried out current was different from perception on the weight of works regarded as important. 4. To the question on parts to be developed in response to the change of medical environment, the most frequent answers were the establishment of their roles as preventive dental practitioners (75.7%), and the establishment of their roles as oral health educators (74.9%). This was consistent with the works that dental hygienists gave the highest weight to, and suggested that dental hygienists regarded preventive dental treatment as most important. Development of abilities to give counsel to patients was 55.2%, acquisition of theoretical knowledge of dental treatment 42.1%, improvement in quality as a hospital manager 28.2%, and acquisition of skills to assist dental treatment 23.2%. These show that, even with regard to the development of future oriented dental hygienists' capacities, assistance to dental treatment was perceived less important as it was with regard to the importance of work.

• 대한임베디드공학회논문지
• /
• 제11권3호
• /
• pp.183-191
• /
• 2016

Recently, in rehabilitation treatment, the situation that requires a measure of the accuracy of the pose and movement of joints is being increased due to the habits and lifestyle of modern people and the environment. In particular, there is a need for active automated system that can determine itself for the matching rate of pose Basically, a method for measuring the matching rate of pose is used by extracting an image using the Kinect or extracting a silhouette using the imaging device. However, in the case of extracting a silhouette, it is difficult to set the comparison, and in the case of using the Kinect sensor, there is a disadvantages that high accumulated error rate according to movement. Therefore, In this paper, we propose a method to reduce the accumulated error of matching rate of pose getting the rotation angle of joint by measuring the real-time amount of change of 9-axis sensor. In particular, it can be measured same conditions that unrelated of the physical condition and unaffected by the data for the back and forth movement, because of it compares the current rotation angle of the joint. Finally, we show a comparative advantage results by compared with traditional method of extracting a silhouette and a method using a Kinect sensor.

• 전기학회논문지
• /
• 제56권1호
• /
• pp.112-116
• /
• 2007

We have investigated the hysteresis phenomenon of a hydrogenated amorphous silicon thin film transistor (a-Si:H TFT) and analyzed the effect of hysteresis phenomenon when a-Si:H TFT is a pixel element of active matrix organic light emitting diode (AMOLED). When a-Si:H TFT is addressed to different starting gate voltages, such as 10V and 5V, the measured transfer characteristics with 1uA at $V_{DS}$ = 10V shows that the gate voltage shift of 0.15V is occurred due to the different quantities of trapped charge. When the step gate-voltage in the transfer curve is decreased from 0.5V to 0.05V, the gate-voltage shift is decreased from 0.78V to 0.39V due to the change of charge do-trapping rate. The measured OLED current in the widely used 2-TFT pixel show that a gate-voltage of TFT in the previous frame can influence OLED current in the present frame by 35% due to the change of interface trap density induced by different starting gate voltages.

• 대기
• /
• 제17권2호
• /
• pp.171-183
• /
• 2007

Trends of daily maximum and minimum temperatures in major cities of South Korea (Seoul, Busan, Incheon, Daegu, and Ulsan) during the past 40 years (1961-2000) were investigated. Temperature records for the Chupungryeong station were compared with those of the large cities because of the rural environment of the station. There were distinct warming trends at all stations, although the warming rates depend on each station's local climate and environment. The warming rates in Korea are much greater than the global warming trends, by a factor of 3 to 4. The most increasing rate in daily maximum temperature was at Busan with $0.43^{\circ}C$ per decade, the most increasing rate in daily minimum temperature was at Daegu with $0.44^{\circ}C$ per decade. In general, the warming trends of the cities were most pronounced in winter season with an increasing rate of $0.5^{\circ}C$/decade at least. Diurnal temperature range shows positive or negative trends according to the regional climate and environmental change. The frequency distribution of the daily temperatures for the past 40 years at Seoul and Chupungryeong shows that there have been reductions in cold day frequencies at both stations. The results imply that the impacts on human health might be positive in winter and adverse in summer if the regional warming scenario by the current regional climate model reflects future climate change in Korea.

• International Journal of Automotive Technology
• /
• 제3권1호
• /
• pp.27-32
• /
• 2002

Semi-active suspension systems are greatly expected to be in the mainstream of future controlled suspensions fur passenger cars. In this study, a continuous variable damper for a passenger car suspension is developed. It is controlled actively and exhibits high performance with light weight, low cost, and low energy consumption. To get fast response of the damper, reverse damping mechanism is adapted, and to get small pressure change rate after blow-off, a pilot controlled proportional valve is designed and analyzed. The reverse continuous variable damper is designed as a HS-SH damper which offers good body control with reduced transferred input force from tire, compared with any other type of suspension system. The damper structure is designed, so that rebound and compression damping force can be tuned independently, of which variable valve is placed externally. The rate of pressure change with respect to the flow rate after blow-offbecomes smooth when the fixed orifice size increases. Damping forces are measured with the change of the solenoid current at the different piston velocities to confirm the maximum hysteresis of 20N, linearity, and variance of damping farce. The damping farce variance is wide and continuous, and is controlled by the spoof opening, of which scheme is usually adapted in proportional valves. The reverse continuous variable damper developed in this study is expected to be utilized in the semi-active suspension systems in passenger cars after its performance and simplicity of the design is confirmed through real car test.