• Journal of Radiation Industry
• /
• v.2 no.3
• /
• pp.141-148
• /
• 2008

Beta rays emitted from tritium in titanium tritide film were simulated with cathode rays of a scanning electron microscope to investigate the effect of beta rays from tritium on semiconductor devices. The cathode ray currents, which vary with the change of applied energy and beam spot size, were measured with Faraday cup. The current from the semiconductor device irradiated with cathode rays at various conditions was measured. The cathode ray current increased with the increase of spot size to a maximum then decreased when the spot sized increased further. The magnitude of current produced in the semiconductor device is proportional to the magnitude of cathode ray current. The magnitude of cathode ray current at each energy level was matched to the intensity of beta ray to simulate the tritium beta ray spectrum. Then the semiconductor characteristics were analyzed with I-V curves.

• Journal of the Korean Home Economics Association
• /
• v.43 no.4 s.206
• /
• pp.141-159
• /
• 2005

The purpose of this study is to examine the effects of warning labels of consumption goods on consumer behavior and the consumers' evaluation in order to suggest a policy of warning labels and the Product Liability Law. The following items which are somewhat risky but are used in everyday the were selected: cup noodles, one-touch can foods, washing machine, microwave range, dry cell, hydro-oxygen detergent, baby-walker, and block-toys. Data were collected from 345 respondents by internet survey with the following results. (1) The average score of the effects of warning labels on consumer behavior was so low that warning labels are not considered effective, especially in block-toys, dry cell, and baby-walker. (2) Consumers' evaluation scores on the character size, design and sticking place of warning labels were very low. Therefore an effort to make warning labels more effective is needed.

• Transactions of the Korean hydrogen and new energy society
• /
• v.25 no.3
• /
• pp.240-246
• /
• 2014

In order to develop a universal cryogenic piston pump of small size for increasing utilization of liquid hydrogen, dynamic compression performance of piston pump were evaluated and improvements were also discussed for piston rod and piston tip. The cryogenic piston pump has crosshead structure and inclined cup shape piston tip. As the results, it was found that i) insulation of heat flow from piston-rod part is required for stable operation ii) improving the self-clearance adjustment effect of piston tip and reducing piston eccentricity were desirable to promote pumping pressure and operating range.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.6
• /
• pp.918-927
• /
• 2000

The purpose of this study was to provide the basic information for the development of nursing brassieres which were suitable for the breast shape and the convenience of nursing mothers’breast-feeding in Korea. In order to find out the problems about design and production planning of nursing brassiere, chief designers of manufacturing and importing companies were questioned. 105 nursing mothers were also questioned to find out the problems about wearing nursing brassieres. The results were as follows: 1. The specific market of the nursing brassieres should be created. 2. The size intervals of the cup and under-bust girth should be shorter. 3. The variety of suitable fasteners for nursing should be developed to provide comfort and convenience for nursing. 4. The variable desi후s should be developed to satisfy nursing mother’s aesthetic desire and the functional aspect of nursing brassieres.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03a
• /
• pp.26-29
• /
• 1999

Process design for elliptically shaped deep drawing products is various according to size shape and specification of products. This study presents two approaches to design the preform that is a key process for elliptically shaped products, One of these is that cross-section of punch is circular. Another is that for the improvement of characteristics for final products the cross-section of the punch is similar to rectangular shape. After forming the preform process design of top-part drawing is the same. In the study blank shape and dimension are obtained by applying a numerical formula and surface area constancy.

• Korean Journal of Human Ecology
• /
• v.14 no.3
• /
• pp.467-473
• /
• 2005

The integrative Internet program was developed for the selection of optimal brassiere components according to the breast types of middle-aged women. In this program, a customer is classified into a certain group through three steps of a discriminant analysis. Three variables used in the analysis include breast volume, radii of curvature of under-breast curve, and a distance between inner breast points. Using individual data of three variables, the optimal brassiere components, i.e. brassiere cup size, curvature of front panel and wire, distance between cups, are suggested for each customer. Discrimination of breast types using only 2D measurements is also included for those who do not have easy access to a 3D measurement device.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.6
• /
• pp.849-856
• /
• 2003

A three-dimensional constitutive model for polarization switching in ferroelectric materials is used to predict the formation of switching zones in an atomic force microscopy(AFM) tip/ferroelectric thin film/bottom electrode system via finite element simulation. Initially the ferrolectric film is poled upward and the bottom electrode is grounded. A strong dc field is imposed on a fixed point of the top surface of the film through the AFM tip. A small switching zone with downward polarization is nucleated and grows with time. It is found that initially the shape of the switched zone is that of a bulgy dagger, but later turn to the shape of a reversed cup with the lower part wider than the upper part. It can also be concluded that the size of switching zones increases with the period of applied electric potential. The present results are qualitatively consistent with experimental observations.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1999.10a
• /
• pp.124-125
• /
• 1999

대기중에 부유하는 미세입자는 인체에 유해한 영향을 미칠 수 있어, 입자 포집 방법에 대한 관심이 높아지고 있다. 부유 에어로졸 입자중 $10\mu\textrm{m}$ 크기 이하의 미세입자는 인체의 흉관 부위까지 도달할 수 있다. 특히 약 $2.5\mu\textrm{m}$ 크기 이하의 입자는 폐포관에 침착할 가능성이 매우 커서, 입자의 화학조성, 침착 부위에 따라서 인체에 유해 정도가 달라질 수 있다. 최근에 미국 EPA에서는 부유분진 입자의 규제를 $2.5\mu\textrm{m}$ 이하입자의 질량 농도에 두고 있다.(중략)

• Proceedings of the Safety Management and Science Conference
• /
• 2004.05a
• /
• pp.295-298
• /
• 2004

Situation to develop Kyonggi Province area to universal tourist attraction area keeping in step with national large size event holding such as sun of Korean visit with opening a port of the In-chon International airport, the world ceramics Expo, World Cup was made up. Growth possibility is big to culture tourism resources and representative tourist resort of the Korea that use view of nature photon circle properly such as ceramics that target area possesses. Area development plan through growth possibility should be arranged to international ceramics production complex and distribution complex. Therefore, plan analyzing future district theme establishment and strength in priority via past and present of target area.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.5
• /
• pp.40-45
• /
• 2003

Optical and electronic industries are using lapping and polishing processing as a final finish rather than grinding, because they need more accurate parts of brittles non-metallic materials such as single crystals. Sapphire has been ground by the ultra-precision surface grinder having a glass -ceramic spindle of extremely-low thermal expansion with various cup-type resinoid-bonded diamond wheels of #400-#3000 in grain size. Sapphire can be ground in the ductile mode. And also, the surface roughness and grinding conditions has been clarified. The smooth surface of Sapphire less than 1nm RMS, 1nm Ra can be obtained by the ultra-precision grinding without any polishing process.