• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.5
• /
• pp.683-689
• /
• 2012

This research was carried out to investigate the effect of installation spacing of subsurface drip irrigation pipe on the mineral content, nutrient uptake, yield of lettuce, water requirement for irrigation, and soil chemical properties in greenhouse cultivation. Semi-forcing and retarding culture were implemented in this experiment, with four treatments containing overhead spray irrigation and three subsurface irrigation lateral spacing intervals of 30, 40, 50 cm at a depth of 30 cm from soil surface, respectively. Each mineral content of lettuce grown under subirrigation system did not show significant difference between treatments, however the uptake of nutrients was lower at 50 cm-distance. The yield was largest in 30 cm-subirrigation (SI), followed by 40 cm-SI, overhead spray, and 50 cm-treatment. Water requirement for irrigation was highest in overhead spray, and it was in reverse proportion to the distance of irrigation pipes. $NO_3$-N content in the soil, at a depth of 10 cm, showed a higher value in 50 cm-SI, followed by 40 cm-SI, overhead spray and 30 cm-SI. Exchangeable K content was highest in 50 cm-SI, Mg was highest in 40 cm-SI, and Ca was lowest in 30 cm-SI. In conclusion, the lettuce yield was not different between 30 and 40 cm-SI, but water requirement for irrigation was lower as the distance of irrigation pipes was further. And it seems to be needed more precise research on this theme, because crop yield and the dynamics of soil minerals in subsurface irrigation can vary with the depth and distance of irrigation pipes, dripper, water flow depending on the soil texture, and plant response to soil minerals.

• Journal of the Institute of Convergence Signal Processing
• /
• v.24 no.3
• /
• pp.166-171
• /
• 2023

Efficient energy management is a very important factor in sensor networks with limited resources, and cluster techniques have been studied a lot in this respect. However, a problem may occur in which energy use of the cluster header is concentrated, and when the cluster header is not evenly distributed over the entire area but concentrated in a specific area, the transmission distance of the cluster members may be large or very uneven. The transmission distance can be directly related to the problem of energy consumption. Since the energy of a specific node is quickly exhausted, the lifetime of the sensor network is shortened, and the efficiency of the entire sensor network is reduced. Thus, balanced energy consumption of sensor nodes is a very important research task. In this study, factors for balanced energy consumption by cluster headers and sensor nodes are analyzed, and a balancing distribution clustering method in which cluster headers are balanced distributed throughout the sensor network is proposed. The proposed cluster method uses multi-hop routing to reduce energy consumption of sensor nodes due to long-distance transmission. Existing multi-hop cluster studies sets up a multi-hop cluster path through a two-step process of cluster setup and routing path setup, whereas the proposed method establishes a hierarchical cluster routing path in the process of selecting cluster headers to minimize the overhead of control messages.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.3
• /
• pp.375-384
• /
• 2014

Kenaf (Hibiscus cannabinus L.) was recognized as a potential source of forage. But the domestic cultivation techniques are not set standards yet. So we tested the basic culture techniques during 2012~2013 for getting a high yield and good grade forage production system. The best seeding method for mechanized planting (corn planter used) was hill seeding with $20{\times}20cm$ seeding distance. When we treated hill seeding with $20{\times}20cm$, the yield what we could get was 13,641 kg/10a and it was 32% more than that of conventional practice hill seeding with $20{\times}30cm$ seeding distance. The proper seeding date for getting high yield was May 1. In May 1, the yield per 10a was reached 13,423 kg, and it was 30% more than that of seeding at May 30. More over the crude protein content which was important factor for determinating forage nutritive value was 12.7% and it was higher 1.8% (relatively 16.5% high) than that of May 30 seeding. The most effective herbicide for kenaf was Fluazipof-p-butyl. It's herbicidal rate was 97% and phyto-toxicity was less than 5%. Regional adaptability for Jeollabuk-Do including Imsil Gun, Kochang Gun and Sunchang Gun were identified that the stable cultivation were possible in these area with average yield 12,400 kg/10a and it was about 1.7 times as compared to corn harvest.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.2
• /
• pp.411-417
• /
• 2021

The field that studies human-computer interaction is called HCI (Human-computer interaction). This field is an academic field that studies how humans and computers communicate with each other and recognize information. This study is a study on hand gesture recognition for human interaction. This study examines the problems of existing recognition methods and proposes an algorithm to improve the recognition rate. The hand region is extracted based on skin color information for the image containing the shape of the human hand, and the center of gravity profile is calculated using principal component analysis. I proposed a method to increase the recognition rate of hand gestures by comparing the obtained information with predefined shapes. We proposed a method to increase the recognition rate of hand gestures by comparing the obtained information with predefined shapes. The existing center of gravity profile has shown the result of incorrect hand gesture recognition for the deformation of the hand due to rotation, but in this study, the center of gravity profile is used and the point where the distance between the points of all contours and the center of gravity is the longest is the starting point. Thus, a robust algorithm was proposed by re-improving the center of gravity profile. No gloves or special markers attached to the sensor are used for hand gesture recognition, and a separate blue screen is not installed. For this result, find the feature vector at the nearest distance to solve the misrecognition, and obtain an appropriate threshold to distinguish between success and failure.

• Journal of Broadcast Engineering
• /
• v.19 no.6
• /
• pp.854-865
• /
• 2014

This paper proposes a method to generate a stereoscopic image pair from a digital hologram by considering the situation that digital hologram data is serviced but the end-user does not have the proper display equipment, etc. We use Fresnel transform as the method to convert a digital hologram into an image. Each image of the stereoscopic image pair uses a part of the given digital hologram and the sizes of the two partial digital holograms for the two images are chosen to be the same. Here, the size of the image is adjusted by the size of the partial digital hologram and the disparity between the pair images is adjusted by the distance between the centers of the two partial hologram. This paper also deals with how to adjust the size and the disparity of the images. In this paper the generated stereoscopic images are implemented as an anaglyphic display type to confirm the feeling of distance by wearing the red-blue glasses.

• Journal of Korean Society for Quality Management
• /
• v.45 no.2
• /
• pp.247-260
• /
• 2017

Purpose: The study is aimed to identify the national cultural dimensions that are affecting the quality management (QM) maturity level and the project quality performance, and analyze their relationships. Methods: This study collected the data of QM Maturity level based on Crosby's QM maturity model and the project quality performance using the Iron Triangle (Quality, Time/Schedule and Cost) from the employees who are participating in the ITER Project across the major 8 countries (China, France, Italy, Japan, Korea, Russia, U.K. and U.S.A.). Three research hypotheses are proposed concerning the national cultural dimensions in this study and Hofstede's five cultural dimensions framework are used for the statistical test. Results: The results are two folds in the study: First, there is a significant positive correlation between the QM maturity level and the project quality performance. Second, three cultural dimensions (Collectivism, Large Power Distance and Strong Uncertainty Avoidance) and five cultural dimensions (Collectivism, Large Power Distance, Strong Uncertainty Avoidance, Feminity and Long Term Orientation) have a positive impact on the QM maturity level and the project quality performance respectively. Conclusion: From the results, the understanding and consideration of the culture difference among the countries participating International Collaboration R&D project are recommended.

• Journal of Auto-vehicle Safety Association
• /
• v.9 no.4
• /
• pp.38-47
• /
• 2017

With automobiles sharply increasing worldwide, we are faced with serious social problems such as traffic accidents, traffic jams, environmental pollution, and economic inefficiency. In response, research on ITS is promoted mainly by regions with advanced automotive industry such as the US, Europe, and Japan. While Korea is working to get ahead to take global market through developing and turning into global standards systems related to ASV(Advanced Safety Vehicle), the country is not excellently prepared for such projects. The purpose of ACC is to control the vehicle's longitudinal speed and distance and minimize driver workload. Such a system should be useful in preventing accidents, as it reduces driver workload in the 21st-century world of telematics created by the development of automobile culture industry. In this light, the thesis presents a method to test and evaluate ACC system and a mathematical method to assess distance. Furthermore, for the proposed test and evaluation, theoretical values are tested with vehicle test and a database is acquired, by using vehicles equipped with an ACC system. We proposed the scenarios suitable for the domestic environment and conducted the actual road test. Theoretical evaluation criteria for developing ACC system may be employed and scenario-specific evaluation methods may find their useful application through testing the formula proposed by comparing the database and the mathematical method. and, many companies are expected to utilize the scenario in the developing stage of ACC, and be able to employ as a verification method by harnessing theoretical formula before a road test.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.2
• /
• pp.159-168
• /
• 2022

The purpose of this study is to look at the precise direction and magnitude of cultural elements such as education, gender, power distance, and risk-taking proclivity on ethical decision-making. Data was collected from 194 interviewees in three groups: general business students, accounting major students, and professional auditors in Vietnam. The path analysis is used to test the impact of cultural factors on ethical awareness, ethical judgment, and ethical intention in different dubious scenarios at the personal level as independent variables, intermediate variables, and moderating variables. The metric is the percentage of respondents who believe a particular behavior is unethical based on a set of ethical principles. The researchers used SPSS AMOS software to conduct a confirmatory factor survey to evaluate the convergent and discriminant validity of latent variables. The results show differences between the two groups of students and professionals on these measures, suggesting that all of the four factors have an effect on ethical decision-making. Based on research results, some recommendations are proposed related to the four factors to improve the ethics of future generations of auditors in Vietnam. This study also contributes to the theory of culture in particular and cultural interference in general in the field of accounting-auditing in Vietnam in the process of international integration.

• Horticultural Science & Technology
• /
• v.32 no.1
• /
• pp.46-52
• /
• 2014

This study was conducted to compare colony forming unit (CFU) of microorganisms in closed and open soilless culture systems for estimating the possibility for potential disease occurrence. Samples were collected at four different positions in four commercial greenhouses with closed or open soilless culture system using rock wool or coir as substrate, respectively. The distance between sampling positions was 3 cm starting from the substrate and the surface area of each position was $25cm^2$. The CFU of fungi was significantly higher in the open system, while that of bacteria was not significantly different but showed relatively lower in the closed system. Samples collected at the plastic surface of the substrates where little environmental effects occurred from drainage showed lower CFU than any other positions. The principal component analysis showed that samples collected on the drainage pathway highly affected the changes in microbial population in the greenhouse. These results indicated that greenhouses with closed soilless culture are expected to have more advantageous conditions for restraining the microbial growth, resulting in the lower potential of disease occurence in greenhouse ecosystem.

• The Journal of Small Business Innovation
• /
• v.20 no.2
• /
• pp.17-34
• /
• 2017

This study examines the role of family involvement and national culture in entrepreneurs' choice of mode of entry into entrepreneurship. Mode of entry consists of two choices: starting a new venture or taking over an existing firm. Specifically, we investigate how cultural values moderate the relationship between family involvement and their choice of business takeover. Using a cross-national sample of 3,831 respondents from 33 countries in Flash Eurobarometer data, we develop key variables and test our hypotheses employing hierarchical linear modelling. Our results show that the relationship between family involvement of entrepreneurs and their choice of business takeover is moderated by individualism, short term orientation, and power distance. This research contributes to understanding comparative international entrepreneurship based on national culture. Implications for policy makers and educators are discussed.