• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.155-160
• /
• 2001

This study is performed to evaluate and design the vibration characteristics of the onboard machinery with resilient mountings. To reduce the vibration level of onboard machinery with resilient mountings, it is important to evaluate and, if necessary, modify the vibration characteristics of the resilient mountings. In this study, we have developed a program to calculate natural frequencies of the machinery with resilient mountings, forced vibration levels due to internal excitation force of the machinery itself and external excitation forces. of the main engine and the propeller. and the force and motion transmissibility of the resilient mountings. The developed program is also able to be applied to optimal design of the resilient mountings for obtaining a target natural frequency and for achieving a minimum forced vibration level at the center of gravity of the machinery.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.952-953
• /
• 2015

In this paper, various MPPT control in the most simple and widely used method of IC using the method According to the type of DC-DC converter to analyze the efficiency buck-boost convertor, Cuk convertor using each efficiency was analyzed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.184.1-184.1
• /
• 2014

Nanostructures on Graphene surface receive highly attraction for many applications ranging from sensing technologies to molecular electronics. Recently J. Jasuja et al. reported the electrical property tailoring and Raman enhancement by the implantation and growth of dendritic gold nanostructures on graphene derivatives [ACSNANO, 3, 2358, 2013] Here, we introduced Si vapor on the graphen to induce the nanostructure. The surface property change of graphene by controlling the amount of Si and the thickness of graphene were investigated using high resolution photoemission spectroscopy (HRPES), and atomic force microscopy (AFM). The Si nanostructures on graphene show the thickness dependency of graphene, and the size of Si nano-structure reached to 7 nm and 15 nm on the mono and the multilayered graphene after $30{\AA}$ Si evaporation.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.512-515
• /
• 2006

일반적으로 연료전지 Z-소스 액티브 필터는 고조파 보상전류가 급변하는 경우, 연료전지의 특성에 기인하여 Z-소스 네트워크의 전압이 강하하는 현상이 발생한다. 본 연구에서는 이상의 문제점을 개선하기위한 Z-소스 네트워크의 전압강하 보상기능을 갖는 Z-소스 액티브 필터를 제안하였다. Z-소스 네트워크의 전압보상을 위하여 절연형 Cuk 컨버터가 사용되었다. PSIM을 이용하여 부하 급변의 과도상태에서 제안된 방법의 타당성이 입증되었다.

• Journal of Power Electronics
• /
• v.16 no.5
• /
• pp.1669-1677
• /
• 2016

A new auxiliary circuit for boost, buck, buck-boost, Cuk, SEPIC, and zeta converters is introduced to provide soft switching for pulse-width modulation converters. In the aforementioned family of DC-DC converters, the main and auxiliary switches turn on under zero current transition (ZCT) and turn off with zero voltage and current transition (ZVZCT). All diodes commutate under soft switching conditions. On the basis of the proposed converter family, the boost topology is analyzed, and its operating modes are presented. The validity of the theoretical analysis is justified by the experimental results of a 100W, 100 kHz prototype. The conducted electromagnetic emissions of the proposed boost converter are measured and found to be lower than those of another ZCT boost converter.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.715-716
• /
• 2007

배전선로의 주상변압기 교체 공법은 시공방법에 따라 전력품질이 좌우된다고 할 수 있으나, 지금도 개선되지 않은 방법으로 작업을 하고 있어 부실시공에 의한 고장정전과 안전사고가 근절되지 않고 있으며, 공사비가 과다발생 하는 문제점이 있는 등 전력신기술에 의한 시공품질 관리가 절실히 요구되는 분야이다. 따라서, 본 논문에서는 새로운 위상변환장치를 이용한 무정전 공법을 제안한다. 제안한 공법은 현행 공법의 문제점을 획기적으로 개선함으로써 안정적인 전력공급과 동시에 배전원가 절감에 따른 저렴한 전기요금으로 국민생활에 편리함을 더하고 국가경제 발전에 기여하게 될 것으로 기대된다.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1404-1406
• /
• 2005

본 논문에서는 기존의 DC/DC 컨버터에 특별한 소자의 부가나 가격의 증가 없이 효율을 향상시키기 위한 방안에 대하여 논하였다. 이에 따라 병렬전력전달 방식(Parallel Power Transfer, PPT) 기반 Cuk 컨버터를 제안하였고, 이의 효율 향상 효과를 이론적으로 해석하고, 기존에 널리 사용되고 있는 DC/DC 컨버터와 특성을 비교 분석하였다. 마지막으로 이를 제안된 이론을 기본으로 DC 48V 전원 공급용 시스템을 설계하고, 구성한 다음 PSIM 시뮬레이션을 통해 시스템의 효율 향상 효과와 그 유용성을 입증하였다.

• Nuclear Engineering and Technology
• /
• v.30 no.6
• /
• pp.592-608
• /
• 1998

Inspection of RCS flow measurements for the domestic pressurized water reactors has been performed by the Korea Institute of Nuclear Safety (KINS) as one of the authorized periodical inspection activities. The inspection results for the Westinghouse-type plants reveal that 1) the RCS flow instrumentation has been calibrated by using the initial design and commissioning test result, without reflecting the cycle specific reference flow measurements, 2) the loop-to-loop now variation in the actual flow measurement which has not been considered in the safety analysis affects the asymmetric How transient results, and 3) the measured RCS flows in Kori 3 and 4, Yonggwang 1 and 2 do not support the definition of the best estimate RCS flow, approaching the RCS flow limit. In this study, the revealed problems were discussed with review of the design and the RCS flow measurement uncertainty evaluation, and the technical approaches and recommendations for resolving these problems were proposed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.40-40
• /
• 2010

Employing synchrotron radiation based photoemission spectroscopy (PES) and scanning tunneling microscopy (STM), our group have investigated Si surfaces, various graphenes and molecular nanolayers. In this talk, I introduce recent results on the surface related systems. All experiments have been performed at the surface science beamlines, 3A2 and 7B1, in Pohang Accelerator Laboratory, where high resolution PES (HRPES) and angle resolved PES (ARPES) are available. Metals or molecules are adsorbed and sometimes extreme ultraviolet is irradiated onto surfaces to give them special functions. I show several examples for surface functionalzation and how to characterize solid surface using the analysis techniques. In particular, lots of ARPES and STM data are provided from graphenes, a strong candidate for replacing Si and conducting oxide currently used in many electronic and optical devices.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.491-499
• /
• 2019

Recently, there has been increasing demand for power quality in power supply devices. The IEC 61000-3-2 standard requires that the AC / DC power supply for lighting meet the specifications for the power factor (PF) and total waveform distortion (THD). In addition, advanced countries in Europe are regulating the ripple rate as 15 ~ 30% for the flicker phenomenon caused by the change in the amount of foot energy due to the change in current of the output terminal. Therefore, domestic standards and regulations are being updated. This study adopted the Flyback converter to satisfy the PFC standard, and has the circuit first and second insulation function. To reduce the low frequency ripple of the LED current, Flyback, Coupled Inductor, LC parallel resonance filter, LLC resonance filter, and Cuk were simulated by PSIM to mimic each LED driving circuit. A coupled LC resonant circuit with a coupled inductor on the primary side and LC resonance on the secondary side was also proposed for output side ripple reduction.