• Korean Journal of Materials Research
• /
• v.12 no.6
• /
• pp.436-441
• /
• 2002

Effect of Sn addition on the stress corrosion cracking(SCC) resistance of the Al-Cu-Mn cast alley was investigated by C-ring teat and electrical conductivity measurement, The electrical conductivity and SCC resistance increased by Sn addition. The alley containing 0,10%Sn showed maximum electrical conductivity and the best SCC resistance. At the same composition, the electrical conductivity and SCC resistance increased from peak aged condition to ever aged condition. The PFZ and coarse precipitates along the grain boundary were observed from TEM micrographs. The fracture mode of the alloy was confirmed as intergranular type and showed brittle fracture surface. The SCC mechanism of the alloy was concluded as the anodic dissolution model, The maximum hardness was increased from 130Hv in the Sn-free alloy to 156Hv in the 0.10%Sn added alloy.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.8
• /
• pp.850-856
• /
• 1997

A series of tetradentate Schiff-base ligands; 1,3-bis(salicylideneimino) propane, 1,4-bis(salicylideneimino)butane, and 1,5-bis(salicylideneimino)pentane, and their Cu(Ⅱ) and Ni(Ⅱ) complexes have been synthesized. The properties of ligands and complexes have been characterized by elemental analysis, IR, NMR, UV-Vis spectra, molar conductance, and thermogravimetric anaylsis. The mole ratio of Schiff base to metal at complexes was found to be 1 : 1. All complexes were four-coordinated configuration and non-ionic compound. The electrochemical redox processes of the ligands and their complexes in DMF solution containing 0.1 M TEAP as supporting electrolyte have been investigated by cyclic voltammetry, chronoamperometry, differential pulse voltammetry at glassy carbon electrode, and by controlled potential coulometry at platinum gauze electrode. The redox process of the ligands was highly irreversible, whereas redox process of Cu(Ⅱ) and Ni(Ⅱ) complexes was observed as one electron transfer process of quasi-reversible and diffusion-controlled reaction. Also the electrochemical redox potentials of complexes were affected by chelate ring size of ligands. The diffusion coefficients of Cu(Ⅱ) and Ni(Ⅱ) complexes in DMF solution were determined to be 4.2-6.6×10-6 cm2/sec. Also the exchange rate constants were determined to be 3.6-9.7×10-2 cm/sec.

• Journal of Industrial and Engineering Chemistry
• /
• v.67
• /
• pp.99-108
• /
• 2018

In this paper, novel thiadiazole-thione surfactants including 5-heptyl-1,3,4-thiadiazole-2-thione (HpSDT), 5-phenyl-1,3,4-thiadiazole-2-thione (PSDT) and 5-(2-hydroxyphenyl)-1,3,4-thiadiazole-2-thione (HPhSDT) were synthesized and originally introduced as collectors in froth flotation. Microflotation tests showed that HpSDT exhibited better flotation response to malachite than PSDT and HPhSDT, as well as excellent flotation selectivity against quartz. The contact angle results inferred that the hydrophobization intensity of these collectors toward malachite was in the order as HpSDT> PSDT> HPhSDT. ${\zeta}$-potential recommended a chemisorption of HpSDT on malachite surfaces. FTIR deduced that cupric or cuprous atoms might bond with the S and N atoms of HpSDT to form a conjugated ring. XPS further gave an additional evidence that HpSDT-Cu(I) complexes were produced on malachite surfaces via combining surface Cu atoms with HpSDT's N and S atoms, with reducing surface Cu(II) to Cu (I). The tighter orientation arrangement on malachite and stronger hydrophobicity rendered HpSDT to possess better flotation affinity toward malachite than PSDT and HPhSDT.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.124-124
• /
• 2018

Polydopamine은 수중 접착력, 친환경 접착제, nanoparticle absorption 등 다양한 특성으로 많이 연구되고 있는 소재이다. 본 연구에서는 dopamine을 이용하여 수중 금속을 흡착시키는 thin film을 제작하였다. 종래의 Polydopamine coating 방법으로 wet coating 이 사용되고 있다. 하지만 wet 방식의 경우 시간이 오래 걸릴 뿐만 아니라 in-line, roll to roll 방식을 적용하는 것이 어렵기 때문에 생산적이지 않다. 이에 본 연구에서는 Atmospheric Pressure Plasma(APP)를 이용 하여 Polydopamine-like film을 coating 하였다. APP의 경우 vacuum system, solution tank가 필요 없고 in-line, roll to roll 방식을 적용 할 수 있기 때문에 더 경제적이고 생산적인 공정이다. 또한 기존의 Plasma polymerization 방법은 Plasma energy가 높기 때문에 source의 분자구조가 바뀌거나 atom 단위로 분해된다. source의 분자구조가 바뀌는 "Atomic polymerization", Neiswender-Rosskamp Mechanism이 적용되면 wet 방식 coating한 film과는 다른 특성을 갖게 된다. 하지만 APP polymerization은 Plasma energy가 vacuum plasma 보다 매우 낮기 때문에 stile polymerization mechanism을 구현 하는데 적합 하다. stile polymerization mechanism은 Plasma 내부에서 polymer source를 분해 성장 시켜서 Polymer film 얻는 것이 아닌 source의 분자구조가 깨지지 않으면서 polymer growing 시키는 방법이다. dopamine source의 분자구조를 최대한 유지하려고 하는 이유는 metal absorption과 같은 특성이 dopamine chemical structure에 영향을 받기 때문이다. 많은 논문들에서 dopamine의 catechol group이 metal absorption, adhesion force에 영향을 주는 주요 인자라고 주장하고 있기 때문이다. 그래서 본 논문에서는 Dopamine source의 형태를 보존하면서 Polymerization 하는 방법으로 APP process를 사용 하여 낮은 전압에서 Polydopamine-like film을 제작 하였다. APP system 의 Plasma 방전부 에 Dopamine source를 유입하기 위하여 본 논문에서는 Piezo Spray 방식을 사용 하였다. Dopamine을 evaporator 하는 것이 어렵고 chemical composition이 유사한 monomer를 사용해서 Plasma Polymerization으로 Dopamine 분자 구조를 재현하는 것도 어렵다. 그래서 본 연구에서는 Dopamine을 water에 immerse 하고 Dopamine solution을 mist 상태로 만들어서 Plasma discharge area에 유입하였다. 이러한 방법으로 만들어진 film은 Polydopamine film은 아니지만 Polydopamine film과 유사한 Chemical composition, chemical structure, metal absorption을 갖는 것을 FT-IR, SEM, XPS을 이용 하여 확인 하였다. Dopamine source의 보존에 대하여 명확하게 확인하기 위하여 FT-IR을 측정 하였다. 전압에 따른 Benzene ring, hydroxyl group의 비율을 확인 하였다. 낮은 전압으로 coating 된 Polydopamine-like film 일수록 hydroxyl group peak($3400{\sim}3000cm^{-1}$)과 비교하여 Benzene ring peak($1600{\sim}1580cm^{-1}$ and $1510{\sim}500cm^{-1}$)이 흡수를 더 많이 하는 것을 확인 할 수 있다. 이것은 Benzene ring이 파괴되지 않고 보존되는 것을 보여준다. Dopamine에서 Benzene ring은 absorption main factor인 catechol에 있는 chemical structure이다. 즉 Benzene ring peak이 높을수록 Catechol이 잘 보존 되었다는 의미 이다. Catechol의 보존은 absorption main factor가 보존 된다는 의미 이다. 이러한 Polydopamine-like film으로 As, Cr, Mg, Cu 200ppm solution에 대한 filtration 능력을 확인 하였다. As, Cr, Cu, Mg 의 제거율이 각각 약25%, 35%, 45%, 65%인 것을 확인 하였다. 이 수치는 시중에 판매되는 제품들과 비교했을 때 300%~500% 향상된 수치 이다.

• Korean Journal of Crystallography
• /
• v.9 no.1
• /
• pp.1-5
• /
• 1998

The complex[Cu(L)I2, 2H2O(1) (L:3,14-Dimethyl-2,6,13,17-tetraazatricyclo [14,4,01.18, 07.12]docosane) has been prepared and structurally characterized. The complex (1) crystallizes in the triclinic system, space group P1, a=8.400(1)Å, b=8.986(3) Å, c=9.156(1) Å, α=82.42(1)˚, β=73.61(1)˚ λ=81.04(2)˚, Z=1, R for 1926 observed reflections of [F0>40(F0)], measured at 288K, was 0.042. The tetracoordination around Cu atom of complex(1) is square plane and the average bond distance of Cu-N is 2.029 (11) Å. Both six-membered chelate rings adopts a chair conformation and the five-membered ring are gauche with the sec-NH centers having the RRSS configuration.

• Journal of the Korean Society for Heat Treatment
• /
• v.14 no.2
• /
• pp.89-95
• /
• 2001

The 7175Al alloy is particularly interesting for its high strength and sufficient ductility, fracture toughness and corrosion resistance. Currently vigorous efforts have been made to develop large rockets usable for various purposes in the space. This has created the demand of big size of 7175Al billet which would be applied to heavy forgings. The aim of this study is to investigate the quality level of big billet and the effect of billet size on the mechanical properties of large 7175Al ring roll forgings. The billets range from 370 mm to 720 mm in diameter were homogenized and forged after direct chill casting. The size and volume fraction of second phase particles In ${\Phi}720$ mm billet are larger than those of ${\Phi}370$ mm billet, and its ductility is lower for the condition of homogenization and T6 treatment. The Cu-rich phases formed in interdendritic sites are considered to provide the preferential crack path during cold upsetting. The fracture toughness of ring roll forgings which are made by ${\Phi}370$ mm billet is higher than those of ${\Phi}720$ mm billet.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.12
• /
• pp.1108-1112
• /
• 1994

25-Acetoxy-26,27,28-trimethoxycalix[4]arene was synthesized by the treatment of calix[4]arene trimethyl ether with acetyl chloride in the presence of NaH. The solution conformation was inferred as a partial cone conformation based on the $^1H$-and $^{13}C$ NMR spectra. The crystal structure has been determined by X-ray diffraction method. The crystals are monoclinic, space group $P2_1$/n, a=8.186 (1), b=17.137 (2), c=19.878 (3) ${\AA}$, ${\beta}$=95.67 (1)$^{\circ}$, Z=4, V=2774.90 ${\AA}^3$, $D_c$= 1.22 g $cm^{-3}$, $D_m$=1.23 g $cm^{-3}$. The intensity data were collected on an Enraf-Noninus CAD-4 Diffractometer with a graphite monochromated $Cu-K{\alpha}$ radiation. The structure was solved by direct method and refined by full-matrix least-squares methods to a final R value of 0.054 for 3675 observed reflections. The molecule possesses a partial cone conformation with one flattened phenyl unit, in which one anisol ring, distal to the ester ring, is inverted. The acetoxyphenyl ring is flattened.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1546-1548
• /
• 1998

Dual mode ring resonators(DMRR) have been fabricated using laser ablated $YBa_2Cu_3O_{7-x}$ superconducting thin films. The transition temperature of YBCO thin films were 85 - 88 K and the film thicknesses were about 5,000 $\AA$. Dual mode ring resonators were patterned by standard photolithography process and wet-etching. Then two-layer metal thin films (Ti/Ag) have been deposited for the ground plane on the back side of substrate by e-beam and thermal evaporation. The input/output feedline angles of each resonator were $60^{\circ}$, $100^{\circ}$, $180^{\circ}$. A network analyzer was used for testing the performance of the resonators in the frequency range of 6-13 GHz at 77 K.

• Journal of Microbiology
• /
• v.34 no.3
• /
• pp.248-254
• /
• 1996

$cdc103^+$ gene in Schizosaccharomyces pombe which is similar to the CDC3 gene in Saccharomyces cerevisiae was cloned and sequenced. Comparison of the predicted amino acid sequences of $cdc103^+$ and CDC3 revealed that they share significant similarity (43% identity and 56% identity or similarity) to each other. The gene product of CDC3 in S. cerevisiae is known to be a highly ordered ring of filaments that lies just inside the cytoplasmic membrane in the region of the mother-bud neck. In order to characterize the gene product of $cdc103^+$ in Schizosaccharomyces pombe, fusion proteins were used to generate the polyclonal antibodies specific for the gene product (cdc103p). In immunofluorescence experiments, these antibodies decorate the region of the septum formation as a double ring structure late in the cell division cycle.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.306-307
• /
• 2014

진공용 장비의 sealing 방법으로 Cu gasket을 이용한 CF type과 O-ring을 이용한 NW type이 있다. 이중 O-ring을 이용한 sealing 방법에는 clamp를 사용하게 되는데 Al 합금으로 제작된 clamp에 bellows의 수축 시 받는 전단응력과 전단응력한계 이상의 힘을 받았을 때의 clamp 파손에 따른 역압에 의한 TMP 손상 분석.