• 제목/요약/키워드: Cu-ring

검색결과 109건 처리시간 0.026초

Glucosamine increases vascular contraction through activation of RhoA/Rho kinase pathway in isolated rat aorta

  • Kim, Do-Hyung;Seok, Young-Mi;Kim, In-Kyeom;Lee, In-Kyu;Jeong, Seong-Yun;Jeoung, Nam-Ho
    • BMB Reports
    • /
    • 제44권6호
    • /
    • pp.415-420
    • /
    • 2011
  • Diabetes is a well-known independent risk factor for vascular disease. However, its underlying mechanism remains unclear. It has been reported that increased influx of the hexosamine biosynthesis pathway (HBP) induces O-GlcNAcylation of proteins, leading to insulin resistance. In this study, we determined whether or not O-GlcNAc modification of proteins could increase vessel contraction. Using an endothelium-denuded aortic ring, we observed that glucosamine induced OGlcNAcylation of proteins and augmented vessel contraction stimulated by U46619, a thromboxane $A_2$ agonist, via augmentation of the phosphorylation of MLC20$MLC_{20}$, MYPT1(Thr855), and CPI17, but not phenylephrine. Pretreatment with OGT inhibitor significantly ameliorated glucosamine-induced vessel constriction. Glucosamine treatment also increased RhoA activity, which was also attenuated by OGT inhibitor. In conclusion, glucosamine, a product of glucose influx via the HBP in a diabetic state, increases vascular contraction, at least in part, through activation of the RhoA/Rho kinase pathway, which may be due to O-GlcNAcylation.

Stability Constants of First-row Transition Metal and Trivalent Lanthanide Metal Ion Complexes with Macrocyclic Tetraazatetraacetic and Tetraazatetramethylacetic Acids

  • 홍춘표;김동원;최기영;김창태;최용규
    • Bulletin of the Korean Chemical Society
    • /
    • 제20권3호
    • /
    • pp.297-300
    • /
    • 1999
  • The protonation constants of the macrocyclic ligands, 1,4-dioxa-7,10,13,16-tetraaza-cyclooctadecane-N,N',N",N"'-tetra(acetic acid) [N-ac4[18]aneN402] and 1,4-dioxa-7,10,13,16-tetraazacyclooctadecane-1,4-dioxa-7,10,13,16-N,N',N",N"'-tetra(methylacetic acid) [N-meac4[18]aneN4O2] have been determined by using potentiometric method. The protonation constants of the N-ac4[18]aneN4O2 were 9.31 for logK1H, 8.94 for logK2H, 7.82 for logK3H, 4.48 for logK4H and 2.94 for logK5H. And the protonation constants of the N-meac4[18]aneN4O2 were 9.34 for logK1H, 9.13 for logK2H, 8.05 for logK3H, 5.86 for logK4H, and 3.55 for logK5H. The stability constants of complexes on the divalent transition ions (Co2+, Ni2+, Cu2+, and Zn2+) and tiivalent metal ions (Ce3+, Eu3+, Gd3+, and Yb3+) with ligands N-ac4[18]-aneN4O2 and N-meac4[18]aneN4O2 have been obtained from the potentiometric data with the aid of the BEST program. The three higher values of the protonation constants for synthesized macrocyclic ligands correspond to the protonation of nitrogen atoms, and the fourth and fifth values correspond to the protonation of the carboxylate groups for the N-ac4[18]aneN4O2 and N-meac4[18]aneN4O2. The meatal ion affinities of the two tetra-azamacrocyclic ligands with four pendant acetate donor groups or methylacetate donor groups are compared. The effects of the metal ions on the stabilities are discussed, and the trends in stability constants resulting from changing the macrocyclic ring with pendant donor groups and acidity of the metal ions.

콜레스테롤 카보네이트 결정구조에 관한 연구 (The Crystal Structure of Cholesteryl Carbonates)

  • 박영자;신정미
    • 한국결정학회지
    • /
    • 제7권1호
    • /
    • pp.8-19
    • /
    • 1996
  • 콜레스테롤 메틸카보네이트와 프로필카보네이트의 결정구조를 X-선 회절법으로 연구하였다. 이 결정들은 단사정계이고 공간군은 P21이다. 회절반점들의 세기는 흑연 단색화 장치가 있는 Enraf-Nonius CAD-4 X-선 회절계로 얻었으며, Cu-Kα X-선(λ=1.5418Å)을 사용하였다. 콜레스테롤 메틸카보네이트의 단위세포 길이 a=17.014(1), b=7.682(1), c=10.612(1)Å이며, β=103.05(1)°, Z=2이다. 한편 콜레스테롤 프로필카보네이트의 단위세포길이는 a=13.683(1), b=11.864(2), c=18.904(2)Å이며, β=106.30(1)°, Z=4이다. 분자구조들은 직접법으로 풀었으며 최소자승법으로 정밀화하였다. 최종신뢰도 R값은 메틸카보네이트는 2323개의 회절반점에 대하여 0.051이고, 프로필카보네이트는 3323개의 회절반점에 대하여 0.074이다. 이들 화합물들의 콜레스테롤부분의 분자구조들은 다른 관련 화합물에서 밝혀진 구조와 잘 일치하고 있다. 이의 두 화합물을 포함하여 콜레스테롤 카보네이트들의 결정구조들은 단분자층을 이루면서 쌓여 있어서 독특한 결정구조를 보여주며 같은 계열의 알킬 카보네이트들과 일련의 유사한 결정구조의 구룹들을 보여준다. 콜레스테롤 메틸카보네이트 분자들은 monolayer를 이루면서 쌓여있으며, monolayer 중심부에서는 cholesteryl-C(17) side chain 상호작용이 강하며 layer 사이에는 카보네이트사슬들이 느슨하게 모여있다. 프로필카보네이트 결정에서는 두 개의 결정학적으로 독립된 분자들(A and B)이 있다. A분자들간의 cholesterol-cholesterol상호작용과 B분자들간의 cholesteryl-C(17) side chain 상호작용들이 layer의 중심부에서 일어나며, 이들 분자들은 나사축 방향을 따라서 쌓여있다. 콜레스테롤 카보네이트의 구조들은 액체결정 상태의 특질을 가지고 있고, 이런 성질들을 결정구조와 관련하여 논의하였다.

  • PDF

의성지역 백악기 암석에 대한 고자기 연구 (Palaeomagnetism of Cretaceous Rocks in the Ǔisǒng Area, Kyǒngsang Basin, Korea)

  • 김인수;이현구;윤혜수;강희철
    • 자원환경지질
    • /
    • 제26권3호
    • /
    • pp.403-420
    • /
    • 1993
  • The Cretaceous Kyongsang Basin is known to be composed of several tectonic blocks (or subbasins) with each distinct stratigraphic succession. The study area represents a major part of one of these blocks, i. e. the $\check{U}is\check{o}ng$ block. The area is charaterized by a suite of WNW-trending sinistral strike-slip faults as well as a number of ring faults. A total of 292 independently oriented core samples were drilled from 23 sites, covering virtually all the formations of the Cretaceous $Ky\check{o}ngsang$ Supergroup. Alternating field and thermal demagnetization experiments were conducted to reveal the primary magnetization. Due to the homoclinal nature of the strata in the area, it was not possible to make use of the conventional fold test It is, however, believed that the primary remanent components have been obtained from the majority of the formations, considering the similarity of the palaeomagnetic pole positions with those of contemporary strata of other blocks and the existence of antiparallel reversed remanence. It was found neither any significant difference in magnetic declination on each side of the strike-slip faults nor systematic change of magnetic declination with distance from the fault-line. This does not support such a block rotation hypothesis associated with the strike-slip faulting in the area as alleged by some authors. The samples from the outcrops on or near the fault-lines were severely overprinted by the recent magnetic fields regardless of age and lithology. Epithermal Au-Ag-Cu-Pb-Zn mineralizations are known along some fault lines in the area. It is interpreted that these two facts are closely related with fluid circulations along the fracture zones caused by fault activities. In regard to the age of the strata as deduced from the magnetostratigraphic consideration, the $Ch\check{o}mgok$ formation and the lower strata should be older than Barremian or 124 Ma. The age of volcanics of the $Yuch^{\prime}\check{o}n$ Group sampled in this study should be younger than Campanian or 83 Ma.

  • PDF

거대고리 리간드와 금속이온과의 착물에 관한 반응속도론적 연구 (Kinetic Study of Macrocyclic Ligand-Metal Ion Complexes)

  • 조문환;김진호;박휴범;김시중
    • 대한화학회지
    • /
    • 제33권4호
    • /
    • pp.366-370
    • /
    • 1989
  • 새로운 거대고리 리간드 1,15,18-triaza-3,4 : 12,13-dibenzo-5,8,11-trioxa-cycloeicosane(NdienOdien$H_4$=$N_3O_3$)를 합성하여 $25^{\circ}C$ 95% 메탄올 용액에서 전위차계를 이용하여 양성자 첨가반응의 평형상수를 구한 결과 log $K_1$ ; log $K_2$ ; log $K_3$는 9.1; 8.1; 3.6이었다. 또한 위의 리간드와 이미 합성된 리간드 1,12,15-triaza-3,4;9,10-dibenzo-5,8-dioxa-cycloheptadecane(NdienOen$H_4$=$N_3O_2$)를 각각 Ni(II), Cu(II)의 금속이온과의 착물을 합성하여 수용액에서 산을 가해 착물의 산해리반응 속도 상수를 여러온도에서 분광광도법으로 측정하였다. 또한 활성화에너지($E_a$)와 활성화파라메타 ${\Delta}H^{\neq}$, ${\Delta}S^{\neq}$를 구하였다. 그리고 이들의 자료로부터 이 반응계의 타당한 해리메카니즘을 제안하였다.

  • PDF

층간 보강재로 보강한 3D 프린팅 콘크리트의 강도 특성 (Strength Characteristics in 3D-printed Concrete with Interlayer Reinforcements)

  • 이정우;박지훈;부이광테;조창빈;양인환
    • 한국건설순환자원학회논문집
    • /
    • 제9권3호
    • /
    • pp.338-347
    • /
    • 2021
  • 본 논문은 층간 보강재를 보강한 3D 프린팅 콘크리트의 부착강도를 평가하기 위해 수행되었다. 겹침이음 길이에 따라 두 종류의 층간 보강 방법을 고려하였다. 첫 번째 방법은 층간 보강재의 겹침이음을 하지 않았으며, 두 번째 방법은 40mm의 겹침이음을 고려하였다. 또한, 기건양생 조건과 수중양생 조건의 서로 다른 양생 조건을 고려하였다. 실험 변수를 고려하여 3D 프린팅 콘크리트 시편의 압축강도, 쪼갬인장강도 및 휨인장강도를 세가지 하중 방향에서 측정하였다. 압축강도, 쪼갬인장강도 및 휨인장 강도는 하중방향에 영향을 받았다. 특히 3D 프린팅으로 제작한 콘크리트 시편의 층간 부착면에 인장력이 작용하면 쪼갬인장강도 및 휨인장강도가 크게 감소하였다. 그러나 층간 보강재가 보강된 층의 종방향으로 하중이 가해질 때, 프린팅된 시편의 휨인장강도 또는 부착강도는 크게 증가하였다. 또한 기건양생 조건의 휨인장강도 또는 부착강도는 감소하였으며, 기건 양생 조건에 의해 더 많은 공극의 형성을 유발하여 하중에 더 취약해지는 것으로 나타났다.

철, 알루미늄 수산화물에 의한 중금속 Ion의 흡착 (Adsorption of Heavy Metal Cations by Fe and Al Hydroxides)

  • 이정재;장상문;최정
    • 한국토양비료학회지
    • /
    • 제28권2호
    • /
    • pp.105-113
    • /
    • 1995
  • 토양(土壤)의 구성성분(構成成分) 중 많은 부분(部分)을 차지하고 있는 철(鐵) 및 알루미늄의 수산화물(水酸化物)에 의한 중금속(重金屬)ion들의 흡착(吸着) mechanism을 구명(究明)하기 위하여, 무정형(無晶型) Fe 및 Al 수산화물(水酸化物), Goethite 및 Gibbsite에 의한 중금속(重金屬)ion들의 흡착(吸着) mechanism을 조사(調査)하였다. 1. 철(鐵) 및 알루미늄의 수산화물(水酸化物)에 의한 중금속(重金屬)ion들의 흡착등온선(吸着等溫線)은 Langmuir식(式)에 잘 부합되었으며, 이들의 최대흡착량(最大吸着量) 및 흡착(吸着)에너지는 무정형(無晶型) 수산화물(水酸化物)이 결정형(結晶型) 수산화물(水酸化物)보다 또 알루미늄 수산화물(水酸化物)이 철수산화물(鐵水酸化物)보다 많았다. 2. 중금속(重金屬)ion별(別) 최대흡착량(最大吸着量) 및 흡착(吸着)에너지는 Cu>Zn>Cd의 순(順)으로 CEC, 비표면적(比表面積) 및 하전밀도(荷電密度)와 정(正)의 상관(相關)이 인정(認定)되었다. 3. Goethite 및 Gibbsite에 의한 중금속(重金屬)ion들의 첫번째 흡착(吸着) mechanism은 $Cl^-$를 수반하는 nonspecific adsorption으로 1 Mole의 중금속(重金屬)ion이 흡착(吸着)되는데 대하여 표면(表面) aquo group이나 hydroxo group으로 부터 1 Mole의 H가 탈착(脫着)되었으며, 회응비율(灰應比率)은 pH가 증가(增加)할수록 감소(減少)되고 흡착(吸着)된 중금속(重金屬)ion들은 치환성양(置煥性陽)ion에 의하여 재치환(再置換)될 수 있었다. 4. Goethite 및 Gibbsite에 의한 중금속(重金屬)ion들의 두번째 흡착(吸着) mechanism은 $Cl^-$을 수반하지 않는 specific adsorption으로 1 Mole의 중금속(重金屬)ion이 흡착(吸着)되는데 대하여 표면(表面) aquo group이나 hydroxo group으로부터 2 Mole의 $H^+$가 탈착(脫着)되었으며. 흡착반응(吸着反應)의 비율(比率)은 pH가 증가(增加)할수록 증가(增加)되었으며 흡착(吸着)된 중금속(重金屬)들은 置換性 陽ion에 의하여 再置煥되지 않았다.

  • PDF

쇼 학습시 병코돌고래 명음의 주파수 스펙트럼 분석 (The Waveform and Spectrum analysis of Tursiops truncatus (Bottlenose Dolphin) Sonar Signals on the Show at the Aquarium)

  • 윤분도;신형일;이장욱;황두진;박태건
    • 수산해양기술연구
    • /
    • 제36권2호
    • /
    • pp.117-125
    • /
    • 2000
  • 돌고래의 명음과 행동특성에 관한 기초자료를 얻기 위하여 1998년 12월∼1999년 2월 사이에 제주도 중문관광단지 내 퍼시픽랜드에서 사육중인 병코돌고래의 쇼 학습시 발생한 명음과 조련사의 휘슬음의 파형과 주파수 특성 분석결과를 요약하면 다음과 같다. 쇼 시작 전 인사할 때와 준비운동을 할 때의 펄스폭은 각각 3.0ms, 5.0ms, 중심 주파수는 각각 4.54kHz, 5.24kHz, 스펙트럼 라벨은 각각 125.6dB, 127.0dB였다. 노래를 부를 때 중심 주파수는 3.28∼5.78kHz, 스펙트럼 레벨은 137.0∼142.dB였으며, 링돌리기를 할 때, 공놀이를 할 때, 점프를 할 때의 펄스 폭은 각각 7.0ms, 9.0ms, 2.0ms, 중심 주파수는 각각 2.54kHz, 2.78kHz, :1.50kHz, 스펙트럼 레벨은 각각 135.9dB, 135.2dB, 126.BdB였다. 쇼 종료시 인사할 때의 중심주파수는 5.84kHz, 스펙트럼 레벨은 122.5dB였고, 수중에서 유영할 때 명음의 중심주파수는 10.10kHz, 스펙트럼 레벨은 126.8dB였다. 병코돌고래는 각각의 행동시 마다 각각의 다른 펄스폭과 주파수를 사용하였는데 , 평 균 3kHz와 5kHz 2종의 저주파를 교대로 사용하는 것으로 추정되었다. 또한, 조련사 휘슬음의 주파수 대역은 스펙트럼 분석에서 제1고조파가2.5∼5.0kHz, 제 2 고조파가 7.8∼8.2kHz였는데, 이는 병코돌고래가 공기중에서는 3kHz 또는 5kHz, 수중에서는 10kHz의 명음을 발생$.$이용하고 있는 거의 일치하는 현상을 나타내 어 병코돌고래 는 수중과 공기 중에서 조련사의 휘슬음을 이해하고 응답하는 것으로 추정되었으며, 아울러 조련사의 휘슬음은 쇼 학습시 조련사와 병코돌고래와의 주요 의사소통 수단임을 확인할 수 있었다.90.0% 와 96.0%로 높게 나타났다.및 36 cm로 넣고 순환여과식 시설 내에 실험실 규모의 적용실험을 통해 에어레이터의 효율을 조사하였는데 (Exp.2), 실험 수온 27$^{\circ}C$에서, Exp. 1에서와 동일한 3개의 수리학적 부하량에서 산소 전달률을 측정한 결과, Exp. 1에서와 같이 수리학적 부하량과 매질의 깊이의 증가에 따라 산소 전달률이 증가하였으며, 매질의 깊이가 가장 깊은 36 cm에 대해, 수리학적 부하량이 2 $m^3$/$m^2$/min 일때, 2 kg 02 kg $O_2$/kW-hr의 가장 높은 표준에어레이션효율을 나타내었다. 위의 두 실험 결과에 따라 packed column 에어레이터에서 발포스티로폼 입자를 산소전달 매질로 이용하여 산소 전달률을 증가시킬 수 있다는 것을 확인할 수 있었다.i, Cu, Y, Nb, La, Nd, Pb, Th in excess of 10 ppm. Relatively high amount of most trace elements were detected in the Hwangto. The major and minor chemical compositions of the Hwangto were different depending on the types of host rocks. However, their difference was in the similar range compared with the compositions of host rocks. electron acceptor triggers sensory transduction processes in B. japonicum.t the Christian rejection of the ancestor worship

  • PDF

양생온도(養生溫度)가 Cement로 경화(硬化)시킨 연탄재 Mortar의 강도(强度)에 미치는 영향(影響)에 관한 연구(硏究) (Studies on the Effects of Curing Temperature on the Strength of Briquette Ash Hardened by Cement)

  • 김성완;강신업
    • 농업과학연구
    • /
    • 제7권2호
    • /
    • pp.119-130
    • /
    • 1980
  • 본연구(本硏究)는 양생온도(養生溫度)가 시멘트로 경화(硬化)시킨 연탄재모르터의 강도(强度)에 미치는 영향(影響)을 연구(硏究)하기 위하여 시멘트:연탄재,[시멘트(90%)+소석회(消石灰)(10%)]:연탄재, 시멘트:표준사(標準砂)를 배합비(配合比) 1:2, 1:3, 1:4, 1:5, 1:7, 1:9의 6종류(種類)와 양생온도(養生溫度)를 $20^{\circ}C$, $30^{\circ}C$, $35^{\circ}C$의 3종류(種類)로 구분(區分)하여 ${\sigma}_7$, ${\sigma}_{28}$의 압축(壓縮), 인장(引張), 휨강도시험(强度試驗)을 실시(實施)하였으며 본(本) 시험(試驗)의 결과(結果)를 요약(要約)하면 다음과 같다. 1. 압축강도(壓縮强度)는 표준사(標準砂)를 사용(使用)한 모르터의 강도(强度)를 100으로 했을 때 1:2의 ${\sigma}_7$은 시멘트, 연탄재는 69.3%, (시멘트+소석회(消石灰)):연탄재는 75.1%를 나타냈으며 ${\sigma}_{28}$에서는 전자(前者)와 같은 순(順)으로 56.4%, 49%의 강도(强度)를 나타냈다. 2. 인장강도(引張强度)는 표준사(標準砂)를 사용(使用)한 모르터의 강도(强度)를 100%로 했을 때 1:2의 ${\sigma}_7$은 시멘트:연탄재에서는 64.4%, (시멘트+소석회(消石灰)):연탄재에서는 47.1%를 나타냈으며 ${\sigma}_{28}$은 전자(前者)와 같은 순(順)으로 69.6%, 64.8%의 강도(强度)를 나타냈다. 3. 휨강도(强度)는 표준사(標準砂)를 사용(使用)한 모르터의 강도(强度)를 100%로 했을 때 1:2의 ${\sigma}_7$은 시멘트:연탄재는 46.3%, (시멘트+소석회(消石灰)):연탄재는 65.9%를 나타냈으며 ${\sigma}_{28}$에서는 전자(前者)와 같은 순(順)으로 89.9%, 96.7%의 강도(强度)를 나타냈다. 4. 양생온도(養生溫度) 상승(上昇)에 따른 $1^{\circ}C$당(當)의 강도(强度)의 증가(增加)는 압축강도(壓縮强度)에서 평균(平均) $0.92{\sim}1.75kg/cm^2$, 인장강도(引張强度)에서 $0.14{\sim}0.16kg/cm^2$, 휨강도(强度)에서 $0.21{\sim}0.38kg/cm^2$의 값을 나타냈다.

  • PDF