Acknowledgement
본 연구는 국토교통부/국토교통과학기술진흥원의 지원으로 수행되었습니다(과제번호 19AUDP-B121595-04).
References
- ASTM C109M-07 (2007). Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens), West Conshohocken, PA: ASTM International.
- ASTM C496M-04 (2004). Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, West Conshohocken, PA: ASTM International.
- ASTM 348-18 (2018). Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars, West Conshohocken, PA: ASTM International.
- Baduge, S.K., Navaratnam, S., Abu-Zidan, Y. (2021). Improving performance of additive manufactured(3D printed) concrete: a review on material mix design, processing, interlayer bonding, and reinforcing methods, Structures, 29, 1597-1609. https://doi.org/10.1016/j.istruc.2020.12.061
- Baz, B., Aouad, G., Khalil, N., Remond, S. (2021). Inter-layer reinforcement of 3D printed concrete elements, Asian Journal of Civil Engineering, 22(2), 341-349. https://doi.org/10.1007/s42107-020-00317-0
- Baz, B., Aouad, G., Leblond, P. (2020). Mechanical assessment of concrete - Steel bonding in 3D printed elements, Construction and Building Materials, 256, 119-457.
- Bester, F., Heever, M.V.D., Kruger, J., Cho, S., Zijl, G.V. (2020). Steel fiber links in 3D printed concrete, Second RILEM International Conference on Concrete and Digital Fabrication, 398-406.
- Cappellari, M., Daubresse, A., Chaouche, M. (2013). Influence of organic thickening admixtures on the rheological properties of mortars: relationship with water-retention, Construction and Building Materials, 38, 950-961. https://doi.org/10.1016/j.conbuildmat.2012.09.055
- Ding, T., Xiao, J., Qin, F., Duan, Z. (2020). Mechanical behavior of 3D printed mortar with recycled sand at early ages, Construction and Building Materials, 248, 118-654.
- Hass, L., Bos, F.P., Wolfs, R.J.M., Bos, F.P., Salet, T.A.M. (2020a). Hardened properties of 3D printed concrete: the influence of process parameters on interlayer adhesion, Second RILEM International Conference on Concrete and Digital Fabrication, 119, 132-140.
- Hass, L., Bos, F. (2020b). Bending and pull-out tests on a novel screw type reinforcement for extrusion-based 3D printed concrete, Second RILEM International Conference on Concrete and Digital Fabrication, 632-645.
- Joh, C., Lee, J., Bui, T.Q., Park, J., Yang, I.H. (2020). Buildability and mechanical properties of 3D printed concrete, Materials, 13(21), 4919. https://doi.org/10.3390/ma13214919
- Khayat, K.H. (1998). Viscosity-enhancing admixtures for cement-based materials-an overview, Cement and Concrete Composites, 20(2), 171-188. https://doi.org/10.1016/S0958-9465(98)80006-1
- Kruger, J., Plessis, A.D., Zijl, G.V. (2021). An investigation into the porosity of extrusion-based 3D printed concrete, Additive Manufacturing, 37, 101-740.
- Lee, H., Kim, J.H.J., Moon, J.H., Kim, W.W., Seo, E.A. (2019). Correlation between pore characteristics and tensile bond strength of additive manufactured mortar using X-ray computed tomography, Construction and Building Materials, 226, 712-720. https://doi.org/10.1016/j.conbuildmat.2019.07.161
- Marchment, T., Sanjayan, J. (2020a). Bond properties of reinforcing bar penetrations in 3D concrete printing, Automation in Construction, 120, 103-394.
- Marchment, T., Sanjayan, J. (2020b). Mesh reinforcing method for 3D Concrete Printing, Automation in Construction, 109, 102-992.
- Ma, G., Li, Z., Wang, L., Bai, G. (2019). Micro-cable reinforced geopolymer composite for extrusion-based 3D printing, Materials Letters, 235, 144-147. https://doi.org/10.1016/j.matlet.2018.09.159
- Nerella, V.N., Hempel, S., Mechtcherine, V. (2019). Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing, Construction and Building Materials, 205, 586-601. https://doi.org/10.1016/j.conbuildmat.2019.01.235
- Panda, B., Lim, J.H., Tan, M.J. (2019). Mechanical properties and deformation behaviour of early age concrete in the context of digital construction, Composites Part B: Engineering, 165, 563-571. https://doi.org/10.1016/j.compositesb.2019.02.040
- Paul, S.C., Tay, Y.W.D., Panda, B., Tan, M.J. (2018). Fresh and hardened properties of 3D printable cementitious materials for building and construction, Archives of Civil and Mechanical Engineering, 18(1), 311-319. https://doi.org/10.1016/j.acme.2017.02.008
- Perrot, A., Jacquet, Y., Rangeard, D., Courteille, E., Sonebi, M. (2020). Nailing of layers: a promising way to reinforce concrete 3D printing structures, Materials, 13(7), 1518. https://doi.org/10.3390/ma13071518
- Termkhajornkit, P., Nawa, T., Kurumisawa, K. (2006). Effect of water curing conditions on the hydration degree and compressive strengths of fly ash-cement paste, Cement and Concrete Composites, 28(9), 781-789. https://doi.org/10.1016/j.cemconcomp.2006.05.018
- Wang, W., Konstantinidis, N., Austin, S. (2020). Flexural behaviour of AR-glass textile reinforced 3D printed concrete beams, Second RILEM International Conference on Concrete and Digital Fabrication, 728-737.
- Wolfs, R.J.M., Bos, F.P., Sale, T.A.M. (2018). Early age mechanical behaviour of 3D printed concrete: numerical modelling and experimental testing, Cement and Concrete Research, 106, 103-116. https://doi.org/10.1016/j.cemconres.2018.02.001