• 대한화학회지
• /
• 제50권4호
• /
• pp.328-337
• /
• 2006

연구의 목적은 고등학교 과학 교과서에 제시된 염화구리(II) 수용액의 전기분해 실험의 문제점을 분석하여, 학생들이 실험을 용이하게 수행하게 하고 환기 장치가 없는 과학실 여건을 고려해 염소 기체 발생으로 인한 안전 문제의 발생을 줄이기 위한 개선 실험을 제시하기 위한 것이다. 연구를 위하여 고등학교 11종 과학 교과서에 제시된 염화구리(II) 수용액의 전기분해 실험을 실험 방법에 따라 분류하고, 중등학교 화학 교사들에게 과학 교과서에 제시된 실험 방법대로 실험을 수행하게 한 후 문제점을 분석하여 개선 실험을 모색하였다. 연구 결과에 의하면, U 자관과 가지달린 U 자관을 반응 용기로 사용한 염화구리(II) 수용액의 전기분해 실험에서는 반응속도가 느려서 부반응으로 부산물이 발생하는 문제점이 있었으며, 비커를 반응 용기로 사용한 실험에서는 두 전극이 분리되어 있지 않아 각 전극에서 일어나는 화학반응을 분리하여 관찰할 수 없었다. 그리고 전기분해 장치를 반응 용기로 사용한 실험에서는 반응 생성물의 성질을 확인하기 어려운 문제점이 있었다. 이러한 문제점들을 개선하기 위하여 ㅂ자 모양의 반응 용기를 사용한 결과, 전기분해 반응속도가 빨라졌고, 각 전극에서 생성되는 반응 생성물의 특성을 분리해서 관찰할 수 있었다. 또한, 염화구리(II) 수용액의 사용량과 (-)극 주변에서 일어나는 부반응으로 인한 부산물의 생성량을 줄일 수 있었다. 그러므로 ㅂ자 모양의 반응 용기를 사용하는 개선 실험을 고등학교 과학 탐구 실험에 활용한다면, 염화구리(II) 수용액의 전기분해 실험을 용이하게 수행할 수 있어, 수용액의 전기분해에 관한 과학적인 개념 형성에 도움을 줄 수 있을 것이다.

• 한국인쇄학회지
• /
• 제29권1호
• /
• pp.23-33
• /
• 2011

This experimental focus to characterize luminescence properties related to CNT (Carbon Nano Tube) element dispersedly implanted in ZnS-based phosphor thin film panel fabricated by a screen printing method. More specifically FE-SEM measurements, L-V(Luminescence vs. Voltage) and photo luminescence were carried out to determine an optimum value of CNT concentration and film thickness for the thin film structure of CNT-ZnS:(Cu, Al) by the screen printing method. We confirmed that an optimum value of CNT concentration in the ZnS:(Cu, Al) film panel is about 0.75 wt% resulting that the electric conductivity is 1.6 times higher than that of pure CNT sample and showing that the luminescence intensity is increasing until the optimum concentration. Clearly, CNT is presenting in the luminescence process providing a pathway for the creation of hot electron and a channel for the electron-hole recombination but overly inserted CNT may hinder to produce the hot electron for making an avalanching process. In case of the overly doped CNT 1.0 wt% in the ZnS-based phosphor, the luminescence intensity is decreasing although the electric conductivity is exponentially increasing. Based on these results, we realized that hot electron occurred by the external electric field or exciton arose by the external photon source are reduced dramatically over the critical value of CNT concentration because CNT element provide various isolated residues in the composites of ZnS based phosphor rather than pathway or channel for the D-A(Donnor to Acceptor) pair transition or the radiative recombination of electron-hole.

• 한국결정성장학회지
• /
• 제7권4호
• /
• pp.640-647
• /
• 1997

백금밀폐용기를 사용하여 wagnerite($Mg_2PO_4F)$를 합성하는데 성공하였으며, 유약용안료로 사용하기에 적합한 발색을 위해 $Co^{++}, Ni^{++}, Cu^{++} $등을 첨가하여 wagnerite의 Mg와 금속이온간의 전 성분구간에 걸쳐 고용체(solid solution)을 합성하였다. wagnerite는 용융점($1340^{\circ}C$)에 도달할 때까지 안정하여서 열분해되지 않았으며, 용융전에 오직 한 번의 가역적인 상전이가 $1255^{\circ}C$에서 일어남을 관찰하였다. wagnerite의 격자상수는 금속이온의 첨가량에 비례하여 직선적으로 변화하였는데 $Co^{++}$와 $Zn^{++}$ 첨가시는 증가하였으며, $Ni^{++}$과 $Cu^{++}$를 첨가한 경우에는 감소하였다. 또한 금속이온 첨가시, $Co^{++}$는 자주색, $Ni^{++}$는 노란색, $Cu^{++}$는 녹색을 발현시켰으며 이들의 색조는 첨가량이 증가할수록 밝고 진하여져서 유약 및 플라스틱을 착색하기에 적합한 색상을 나타내었다.

• Progress in Superconductivity
• /
• 제10권1호
• /
• pp.45-49
• /
• 2008

For the development of superconducting fault current limiters (SFCLs), fault current limiting elements were fabricated out of Bi-2212 bulk tubes and tested. The SFCL elements consisted of tube shaped Bi-2212 bulks and metal shunts for the stabilizers. Firstly, the Bi-2212 bulk tubes were processed based on a design of monofilar coils in order to acquire large resistance and high voltage rating. 300 mm-long Bi-2212 tubes were designed to have the current path of 410 cm in length with 24 turns and 41 mm in diameter. The processed monofilar coil, as designed, had 300 A $I_c$ at 77 K. The fabricated superconducting monofilar coils were affixed to Cu-Ni alloy as that of stabilizers. The Cu-Ni alloys were processed to have the same shape of the superconducting monofilar coils. The Cu-Ni coil had resistivity of 32 ${\mu}{\Omega}$-cm at 77 K and 37 ${\mu}{\Omega}$-cm at 300 K. The metal shunts were attached to the outside of the Bi-2212 monofilar coil by a soldering technique. After the terminals made of copper were attached to both ends of the superconductor-metal shunt composite, the gap between the turns and the surface of the elements was filled with an epoxy and a dense mesh made of FRP in order to enhance the mechanical strength. The completed SFCL elements went through fault tests, and we confirmed that the voltage rating of 143 $V_{rms}$ (E =0.35 $V_{rms}$/cm) could be accomplished.

• 자원리싸이클링
• /
• 제9권4호
• /
• pp.3-15
• /
• 2000

전기로 더스트 중에 함유된 Zn, Pb, Cl, Fe, Cu 및 Cd의 건식 환원반응기구를 규몽하고자 탄소뿔 첨가한 더스트 Briquette를 제조하여 Ar 가스 분위기 하의 $800^{\circ}C$ ~ $1100^{\circ}C$반응온도에서 실험을 행하였다. 탄소에 의한 Zn 화합물으 환원반응은 온도상승에 따라 민감하게 나타났으며 반응초기에는 화학반응에 의한 음속단계로 활성화에너지 값은 약 120.6 kl/mole이었다. 한편, Pb와 Cl은 $PbCl_2$의 형태로 휘발되었으며 이들의 휘발제거율은 거의 일치하였다. 또한, 환원제를 첨가하지 않는 경우가 환원제 첨가시 보다 휘발제거율이 빨라 Pb의 대부분은 염화휘발에 의해 제거됨을 알 수 있었다. Cu는 염화휘발에 의해 최대 약 30% 제거되고 나머지 대부분은 Fe와 함께 더스트 중에 잔존하여 Cd은 $1000^{\circ}C$에서 15분만에 거의 100%의 휘발제거율을 나타내었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1988년도 춘계학술대회 논문집
• /
• pp.7-9
• /
• 1988

This paper considers problems which must be overcome to produce long lengths of superconductor wire from the 90K Tc superconducting ceramic material, $Y_1Ba_2Cu_3Ox$. Attention is focused on the powder-in-tube process where the superconducting powder is placed in a tube which is then formed into wire. Two major problems are considered, control of the oxygen level and improvement of Jc in the final wire. The results show that Jc of the wire were $400A/cm^2$ at liquid nitrogen temp.

• Nuclear Engineering and Technology
• /
• 제41권10호
• /
• pp.1315-1322
• /
• 2009

The present article is concerned with the application of an electrochemical noise (EN) monitoring technique to analyze the initiation and propagation of Pb-assisted stress corrosion cracking (SCC) of an Alloy 600 material in a simulated environment of a steam generator (SG) sludge pile at high temperatures. A typical increase of electrochemical current noise (ECN) and electrochemical potential noise (EPN) was frequently recorded from the EN measurement in a caustic solution with such impurities as PbO and CuO, indicating that there are localized corrosion events occurring. With the aid of microscopic and spectral analyses, the EN data involving information on such stochastic processes as uniform corrosion and the initiation and propagation of SCC, were analyzed based on a stochastic theory.

• 한국태양에너지학회 논문집
• /
• 제32권2호
• /
• pp.105-112
• /
• 2012

The conversion of solar energy into acoustic waves is experimentally studied. Measurements were made on the Sound Pressure Level (SPL), frequency, onset time and the temperature gradient across the stack. A pyrex resonance tube is used with a honey-comb structure ceramic stack along with Ni-Cr and Cu wires. An AL1 acoustical analyzer was used to measure the SPL and frequency of acoustic waves whereas K-type thermocouples were hired to estimate temperature gradients. For a resonance tube of 100 mm, no acoustic waves were generated with a power input of 25W. By increasing its length to 200 mm, however, maximum SPLs of 96.4 dB, 106.3 dB and 112.8 dB were detected for the tubes of 10mm,20mm and 30mm in IDs and their respective stack positions of 70mm, 60mm and 50mm from the closed end.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.516-521
• /
• 2012

The conversion of solar energy into acoustic waves is experimentally studied. Measurements were made on the Sound Pressure Level (SPL), frequency, onset time and the temperature gradient across the stack. A pyrex resonance tube is used with a honey-comb structure ceramic stack along with Ni-Cr and Cu wires. An AL1 acoustical analyzer was used to measure the SPL and frequency of acoustic waves whereas K-type thermocouples were hired to estimate temperature gradients. For a resonance tube of 100mm, no acoustic waves were generated with a power input of 25W. By increasing its length to 200mm, however, maximum SPLs of 96.4 dB, 106.3 dB and 112.8 dB were detected for the tubes of 10mm, 20mm and 30mm in IDs and their respective stack positions of 70mm, 60mm and 50mm from the closed end.

• 한국표면공학회지
• /
• 제41권4호
• /
• pp.134-141
• /
• 2008

We have developed a numerical model for a remote ICP(inductively coupled plasma) system in 2D and 3D with gas distribution configurations and confirmed it by plasma diagnostics. The ICP source has a Cu tube antenna wound along a quartz tube driven by a variable frequency rf power source($1.9{\sim}3.2$ MHz) for fast tuning without resort to motor driven variable capacitors. We investigated what conditions should be met to make the plasma remotely localized within the quartz tube region without charged particles' diffusing down to a substrate which is 300 mm below the source, using the numerical model. OES(optical emission spectroscopy), Langmuir probe measurements, and thermocouple measurement were used to verify it. To maintain ion current density at the substrate less than 0.1 $mA/cm^2$, two requirements were found to be necessary; higher gas pressure than 100 mTorr and smaller rf power than 1 kW for Ar.