• 제목/요약/키워드: Crustal Movement Velocity

검색결과 10건 처리시간 0.022초

GPS를 이용한 토호쿠 대지진 이후 한반도 지각변동 속도 분석 (Analysis of Korea's Crustal Movement Velocity After the Great Tohoku-Oki Earthquake by Using GPS)

  • 하지현;이명근;조영식
    • 한국항행학회논문지
    • /
    • 제17권6호
    • /
    • pp.600-608
    • /
    • 2013
  • 2011년 3월 11일에 일본 토호쿠 지역에서는 Mw 9 규모의 대지진이 발생하였다. 이 지진으로 인하여 일본지각은 최대 5m 이상의 지각변동이 관측되었으며, 한반도 역시 년간 지각변동량이 순간적으로 이동하는 등 지진의 영향권에 있었다. 이 논문에서는 토호쿠 지진이 발생한지 2.5년 가량 지난 현재의 시점에서 지진 이후의 한반도 지각변동 속도를 분석하고 과거의 한반도 지각변동 속도와 비교함으로써 변화된 지각변동 경향을 분석하였다. 이를 위하여 국토지리정보원의 GPS 관측데이터를 이용하여 2003년부터 2008년까지 6년간의 관측데이터와 지진 이후 6개월 후부터 2013년 6월 말일까지 관측데이터를 이용하여 정밀 좌표를 결정하고 시계열 분석을 통해 남북, 동서, 수직 방향의 절대 속도를 산출하였다. 그 결과 한반도의 지각변동 속도는 토호쿠 지진 발생 이전에 비해 남북 방향으로 평균 3.9mm/yr, 동서 방향으로 평균 7.5mm/yr의 속도 증가가 발생한 것을 알 수 있었다.

DGPS 자료를 이용한 남한지역의 지각변위 분석 (Analysis of South Korean Crust Deformation Using DGPS Data)

  • 박준구;조진동;임삼성
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2004년도 대한지구물리학회.한국지구물리탐사학회 공동학술대회 초록집
    • /
    • pp.54-62
    • /
    • 2004
  • According to the Korea Tectonic Map, the Korean Peninsula can be divided into seven tectonic units and each of them shows a peculiar deformation pattern. In order to estimate an amount of crustal deformation in the Korean peninsula, we obtained the velocity vector fields of South Korea by dealing with the data set of the years 2001 and 2002, measured from the permanent GPS stations across the country To obtain a relatively precise coordinate of each station, we used GAMIT that is a comprehensive GPS analysis package developed at MIT, Then, a Kalman filter called GLOBK is used to combine the results from GAMIT and to estimate the relative velocity vector for the crustal deformations. The crustal movement of South Korea is turned out to be about 1mm per year westward and about 0.6mm per year southward. In case of Suwon and Seosan(Gyeonggi Massif), the movement occurs slightly to the north-east direction. The movement of a relative velocity field in the tectonic unit is unidirectional, yet the magnitude of the velocity is very small.

  • PDF

IGS 자료에 의한 한반도 주변의 지각변동 특성 해석 (Characteristic Analysis of Crustal Movement around Korean Peninsula By IGS Data)

  • 박준규;강준묵
    • 한국측량학회지
    • /
    • 제28권6호
    • /
    • pp.645-653
    • /
    • 2010
  • 최근 한반도 주변의 지진발생이 증가하고 있는 추세이며, 이에 따라 최선의 자료에 의한 지각변동 해석이 필요한 시점이다. 본 연구에서는 IGS(International GNSS Service) 상시관측소의 GPS 자료를 이용하여 한반도 주변에서 일어나고 있는 지각변동의 절대속도를 정밀하게 산출하였으며, 지각변동 모델과의 비교 및 기간별 지각변동 분석을 통해 지각변동특성을 파악하고자 하였다. 산출된 지각변동속도로부터 유라시아 및 북아메리카 판은 남동쪽 방향, 필리핀 판은 북서쪽 방향으로 이동하고 있음을 알 수 있었다. 또한 한반도를 기준으로 한 상대속도 산출을 통해 북아메리카 판과 필리핀 판이 우리나라방향으로 이동하고 있음을 파악하였다. 이러한 연구결과는 향후 동아시아 지역의 지진 및 지구물리 연구에 널리 활용될 것으로 기대된다.

Crustal Movement at Ol Doinyo Lengai based on GPS Measurements

  • Meshili, Valerie Ayubu;Kwon, Jay Hyoun
    • 한국측량학회지
    • /
    • 제38권5호
    • /
    • pp.401-406
    • /
    • 2020
  • Continuously monitoring of Horizontal and Vertical movements in vulnerable areas due to earthquakes and volcanic activities is vital. These geohazard activities are the result of a slow deformation rate at the tectonic plate boundaries. The recent development of GPS (Global Positioning System) technology has made it possible to attain a millimeter level changes in the Earth's crust. This study used continuously observed GPS data at the flank of Ol Doinyo Lengai volcanic Mountain to determine crustal motion caused by impinging volcano from mantle convention. We analyzed 8 GPS observed from June 2016 to Dec 2019 using a well-documented Global Kalman Filter GAMIT/GLOBK software. The resulting velocity from GAMIT/GLOBK analysis was then used to compute the relative motion of our study area with respect to Nubia plate. Our analysis discovered a minor motion of less than 5mm/year in both horizontal and vertical components.

First Results of GPS Measurements Along the Lai Chau - Dien Bien Fault in North-West Vietnam

  • DUONG Chi Cong;YUN Hong-Sic;CHO Jae-Myong;LEE Dong-Ha
    • Korean Journal of Geomatics
    • /
    • 제5권1호
    • /
    • pp.51-58
    • /
    • 2005
  • GPS measurements from Feb. 2002 through Mar. 2004 were used to estimate recent crustal movement across the Lai Chau - Dien Bien fault system in North-West Vietnam. Four GPS campaign data were processed and combined with appropriate constraints using automatic GAMIT/GLOBK run in order to estimate ITRF2000 coordinates, local horizontal velocity and extensive/compressive strain rates. ITRF2000 velocities are consistent with east-southeastward movement of Sundaland i.e. Indochina. Local velocities show not much left-lateral strike-slip of the fault system and derived strain rates are insignificant from zero at $95\%$ confidence.

  • PDF

Discontinuity in GNSS Coordinate Time Series due to Equipment Replacement

  • Sohn, Dong-Hyo;Choi, Byung-Kyu;Kim, Hyunho;Yoon, Hasu;Park, Sul Gee;Park, Sang-Hyun
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제11권4호
    • /
    • pp.287-295
    • /
    • 2022
  • The GNSS coordinate time series is used as important data for geophysical analysis such as terrestrial reference frame establishment, crustal deformation, Earth orientation parameter estimation, etc. However, various factors may cause discontinuity in the coordinate time series, which may lead to errors in the interpretation. In this paper, we describe the discontinuity in the coordinate time series due to the equipment replacement for domestic GNSS stations and discuss the change in movement magnitude and velocity vector difference in each direction before and after discontinuity correction. To do this, we used three years (2017-2019) of data from 40 GNSS stations. The average magnitude of the velocity vector in the north-south, east-west, and vertical directions before correction is -12.9±1.5, 28.0±1.9, and 4.2±7.6 mm/yr, respectively. After correction, the average moving speed in each direction was -13.0±1.0, 28.2±0.8, and 0.7±2.1 mm/yr, respectively. The average magnitudes of the horizontal GNSS velocity vectors before and after discontinuous correction was similar, but the deviation in movement size of stations decreased after correction. After equipment replacement, the change in the vertical movement occurred more than the horizontal movement variation. Moreover, the change in the magnitude of movement in each direction may also cause a change in the velocity vector, which may lead to errors in geophysical analysis.

GNSS를 활용한 한반도 동남권 지역의 지각 변동 파라미터 분석 (Analysis of Plate Motion Parameters in Southeastern South Korea using GNSS)

  • 이승준;윤홍식
    • 한국측량학회지
    • /
    • 제38권6호
    • /
    • pp.697-705
    • /
    • 2020
  • 본 논문은 GNSS 자료를 이용하여 한반도 동남권 지역의 지각 변동 파라미터에 관한 내용이다. 한반도 동남권 지역에 5.0이상의 지진이 발생하였으며, 여러 가지 방법으로 지진의 위험성에 대하여 평가할 필요성이 있다. 포항과 경주의 장기적인 지각 운동 패턴을 밝히기 위해 탄성 이론을 이용하여 지각변동 파라미터를 도출하였다. CORS의 7년간의 GNSS 데이터를 Gamit/Globk S/W를 사용하여 정밀한 좌표를 취득하였다. 한반도 전체의 속도 벡터는 평균 31mm/yr로 나왔으며 방위각은 일반적으로 110°의 경향을 나타내었다. 연구의 주요 내용은 7년간 한반도 동남권 지역의 주응력의 방향은 몇가지 예외를 제외하면 전체적으로 ENE-WSW으로 나왔다. 최대 전단 변형률의 크기는 평균적으로 (0.11±0.07) μ/yr으로 일본 중부 지역의 약1/3이다. 이번 연구 결과를 고려하면 한반도 남부의 평균 최대전단응력은 타당한 것으로 간주된다. 주응력의 평균 방위각은 약 (85.4°±26.8°)이다. 양산단층을 기준으로 평균 방위각이 좌우 (73.2°±21.5°) 와 (105.2°± 17.0°)로 차이가 난다. 한반도 동남부 지역의 지진 발생 지역이 전단응력이 크게 나온 것은 주목할만 하다. 결론적으로 본 연구는 한반도 동남부 지각 변동 파라미터 특성을 반영하여 지진 재해 관리 연구에 기여할 수 있음을 알 수 있다.

정밀절대측위를 이용한 양산지역의 지각변위 해석 (Analysis of the Crustal Displacement at Yangsan Using Precise Point Positioning)

  • 박준규
    • 한국측량학회지
    • /
    • 제28권2호
    • /
    • pp.289-295
    • /
    • 2010
  • 양산단층은 한반도의 남동쪽에 위치한 길이 170km 이상의 대규모 단층이며, 지질학적으로 한반도에서 가장 최근에 형성된 중요한 구조대 가운데 하나이다. 또한 지진학적 관점에서 볼 때, 과거로부터 수많은 지진 기록이 존재하고 있어 활성단층의 여부에 대한 논란이 계속 되고 있다. 이에 본 연구에서는 한국지질자원 연구원의 양산 GPS 상시관측소로부터 수신된 GPS 자료를 정밀절대측위 방법으로 처리하고, 처리결과를 이용하여 양산상시관측소의 이동속도를 계산하였다. 연구결과 양산지역이 방위각 약 $126^{\circ}$의 49mm/year 속도로 이동하고 있음을 알 수 있었으며, 이러한 결과는 단층지역의 지구물리 해석에 기초자료로 활용이 가능할 것으로 기대된다.

FVM에 기초한 VOF법에 의한 쓰나미 수치해석 (NUMERICAL SIMULATION OF TSUNAMI WITH VOF METHOD BASED ON FVM)

  • 명현국;박진우
    • 한국전산유체공학회지
    • /
    • 제19권4호
    • /
    • pp.52-60
    • /
    • 2014
  • Recently, coastal structures have been built to protect coastal areas. However, if a tidal wave caused by an earthquake hits the coast, it would cause catastrophic damages. It is important to analyze the basics and the characteristics of a tsunami to reduce damages caused by natural disasters. In this study, a tsunami passing over different topographical changes is simulated with VOF method based on FVM(Finite Volume Method). The reduction of both scale and velocity is accomplished by similarity analysis, and an initial energy is generated by increasing the water level as needed to create a tsunami as if it is caused by a crustal movement. It is found that the present method is appropriate to simulate the tsunami with its mechanism.

Slip Movement Simulations of Major Faults Under Very Low Strength

  • Park, Moo-Choon;Han, Uk
    • 자원환경지질
    • /
    • 제33권1호
    • /
    • pp.61-75
    • /
    • 2000
  • Through modeling fault network using thin plate finite element technique in the San Andreas Fault system with slip rate over 1mm/year, as well as elevation, heat flow, earthquakes, geodetic data and crustal thickness, we compare the results with velocity boundary conditions of plate based on the NUVEL-1 plate model and the approximation of deformation in the Great Basin region. The frictional and dislocation creep constants of the crust are calculated to reproduce the observed variations in the maximum depth of seismicity which corresponds to the temperature ranging from $350^{\circ}C$ to $410^{\circ}C$. The rheologic constants are defined by the coefficient of friction on faults, and the apparent activation energy for creep in the lower crust. Two parameters above represent systematic variations in three experiments. The pattern of model indicates that the friction coefficient of major faults is 0.17~0.25. we test whether the weakness of faults is uniform or proportional to net slip. The geologic data show a good agreement when fault weakness is a trend of an additional 30% slip dependent weakening of the San Andreas. The results of study suggest that all weakening is slip dependent. The best models can be explained by the available data with RMS mismatch of as little as 3mm/year, so their predictions can be closely related with seismic hazard estimation, at least along faults where no data are available.

  • PDF