• Journal of the Korean Society for Railway
• /
• 제14권5호
• /
• pp.391-397
• /
• 2011

In this paper, the pressure endurance test of passenger train's glass window which was developed for next high speed train was studied. At first, pressure test equipment which will be able to generate the maximum pressure same as crossing case between two trainsets in the tunnel was developed. Afterwards the pressure test and evaluation that are based on NFF31-314 were carried out and studied.

• The Transactions of the Korean Institute of Power Electronics
• /
• 제7권1호
• /
• pp.55-64
• /
• 2002

Due to the friction characteristics of cylinders and the rail of a passenger car, in the system actuated with hydraulic systems, there exist dead zones, which can not be controlled by a PID controller. In this paper, the friction characteristics of a cylinder is examined, which may cause the abrupt increase of the acceleration in the zero-crossing speed region. To overcome the drawbacks of a PID controlled hydraulic system, a zooming fuzzy logic controller is designed and finally an improved hybrid controller is Proposed. The proposed controller is composed of the PID controller and the zooming fuzzy controller. The effectiveness of the proposed control scheme is shown by simulation and experimental results, In which the proposed hybrid control method yields good control performance not only in the zero-crossing speed region but also In the overall control region including steady-state region.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.426-430
• /
• 2005

The fiber-optic interferometer which is a powerful application for nondestructive measurement techniques has many advantages such as capability of making portable system, easy optical arrangement, low optical loss. In spite of these advantages, this system has an environmental sensitivity of thermal drifts and vibrations. Against environmental perturbations and nonlinear characteristic of phase modulator, the accurate and fast ${\pi}/2$ phase stepping has been achieved by using zero-crossing detection. CCD camera trigger signal is generated at the 4 zero-crossing points. Our System has achieved up to 100 Hz of image capture speed and 0.6 mrad of accuracy of phase stepping, accuracy.

• Proceedings of the KSR Conference
• /
• 한국철도학회 2001년도 춘계학술대회 논문집
• /
• pp.88-96
• /
• 2001

Rail crossings are major accident-prone areas. Higher traffic volume, frequent rail operation, increased train speed all contribute to increased accident rate and severity In Korea efforts are being made to upgrade currently at-grade rail crossings to grade crossings. There is, however, no quantified analysis measures to analyse the impact of rail grade crossing, thus make it difficult to prioritize different projects under the budget constraints. Projects are selected based on the negotiation between Korea National Railway(KNR) and local governments. To shed light on the development effort for Korean procedure, GradeDec 2000 program of Federal Railroad Adminstration(FRA) was applied for Korean context. Case study involving three rail crossing was ca]lied out, and results are analyzed. Research efforts which need further attention are identified, research direction is analyzed considering local procedure, and issues in the application of the procedures are discussed in detail.

• Proceedings of the KIPE Conference
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.416-417
• /
• 2018

Brushless DC(BLDC) 모터는 브러시가 없어 고속 회전에 유리하기 때문에 핸드피스 모터에 많이 적용하는 추세이다. 핸드피스 모터는 부피가 작을수록 유리하여 홀 센서를 장착하지 않은 경우가 많기 때문에 센서리스 제어를 하여야 한다. BLDC 모터의 상 역 기전력 zero crossing 감지 방법을 이용한 센서리스 제어를 할 시 40,000rpm에 달하는 고속 회전에서 상 전압 floating 구간이 $250{\mu}s$밖에 안되기 때문에 샘플링이 부족하고 스위칭 노이즈도 강해 zero crossing에 대한 감지가 어려울 수 있다. 이 논문에서는 역 기전력에 대한 비선형 필터인 majority function을 응용함으로써 모터 상 역기전력의 zero crossing을 감지해내고 고속 BLDC 모터 센서리스 제어를 하는 방법을 소개한다.

• Proceedings of the KSR Conference
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.595-600
• /
• 2007

Greater expansion and more frequent operation of the railroad transportation system anticipated due to its characteristics including low cost, safety and mass transportation. Recently, effects on the railway structures due to expansion of newly constructed road, construction of subway, city gas pipeline, communication network, electric power network and construction of other railway underground crossing in accordance with urban planning and organization has influenced safe operation of trains. Accordingly, standard for selection of construction method that will enable construction of more economical and rational subway underground crossing structures by preventing problems occurring at the time of above construction works and accidents in safe operation of trains due to construction in advance is definitively necessary. Although there are numerous construction methods that can be applied at the time of construction of railway underground crossing, there are much difficulties in selection of appropriate construction method that considers characteristics of each construction method on non-excavation type construction method, train operation plan of number of operational routes and on-site circumstances. Therefore, this research aims to present rational standard for selection of construction method for such, and standard for slowdown speed and interception of train when passing the areas of slowdown in sectors under construction.

• Journal of Korean Society of Transportation
• /
• 제26권5호
• /
• pp.91-100
• /
• 2008

Pedestrians are exposed to accidents as a result of the lack of understanding the meaning of a flashing green signal. This study was to designed to relate changes of pedestrians' crossing characteristics as a functions of flashing green signal timings. A field survey was conducted to collect pedestrian preference and safety and it was examined by signal operation experiment. Two versions of new pedestrian signal timings were compared to the existing pedestrian signal timings. The results indicated that the number of pedestrians who starts to cross during flashing green signals was significantly decreased when flashing green signals started at 1/2 or 2/3 point of crossing. However, the number of pedestrians who remain in the crossing during red signals was significantly increased when flashing green signals started at 2/3 point of crossing. This study concludes that starting flashing green signals at 1/2 point of crossing is the safest. Also, implication and directions for its practical relevance were discussed.

• Journal of the Korean Society for Railway
• /
• 제10권6호
• /
• pp.735-741
• /
• 2007

A turnout system which permits trains to pass from one track to another is a combination of the switch, the crossing, lead rails which are necessary to connect the switch and the crossing, two guard rails and a switch machine for operating the switch. In Korea, it has been planned to adopt the high speed tilting train which is suitable for the circumstance of Korea and operates at the maximum speed of 180 km/h, at conventional lines by the year of 2010. For the present, the prototype of the tilting train has been fabricated, and has undergoing a trial run. In this study, evaluation of noise around the turnout system induced by the tilting train has been implemented through the field measurements.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• 제11권3호
• /
• pp.124-132
• /
• 2012

There is high probability of children's traffic accidents. Because their physical, mental attribute are weak. Major part of the accidents happen during walking. Above all, jaywalking is the biggest traffic accident reason. Many traffic accidents take place on the road to school or near the home area. So Ministry of Public Administration and Security legislated children safeguard zone since 1995. But a study are inadequate the safety facilities on the effectiveness verification in the school zone. Therefore, this study aims to analyze the effectiveness of safety facilities. The vehicle speed is a direct correlation traffic accident. So in this study, the MOE(Measure of Effectiveness) is average travel speed in the school zone. The results shows that hump, rised pedestrian crossing has an effect.

• Proceedings of the KSR Conference
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.295-300
• /
• 2011

In this paper, the pressure endurance test of passenger glass window which was developed for next high speed train was studied. At first, pressure test equipment which will be able to generate the maximum pressure same as crossing between two trainsets in the tunnel was developed. Afterwards the pressure test and evaluation that were based on NFF31-314 were studied and carried out.