• Journal of the Korean Society of Safety
• /
• v.28 no.4
• /
• pp.1-7
• /
• 2013

Train accidents can be directly connected to fatal accidents-collision, derailment, Fire, railway crossing accidents-resulting in tremendous human casualties. First of all, the railway derailment is not only related to most of railway accidents but also it can lead to much more catastrophic accompanying train overtured than other factors. Therefore, it is most important factor to ensure railway safety. some foreign countries have applied to the detector machines(e.g., ultrasonic detector car, sleep mode, current detector, optical sensing, optical fiber). Since it was developed in order to prevent train from being derailed. In korea, the existing track method has been used to monitor rail condition using track circuit. However, we found out it impossible for Communication Based Train Control system(CBTC), recent technology to detect rail condition using balise(data transmission devices) without no track circuit. For this reason, it is needed instantly to develop real-time monitoring system used to detect broken rails. Firstly, this paper presents domestic and international statues analysis of rail breaks technology. Secondly, the composition and the characteristics of the real-time monitoring system. Finally, the evidence that this system could assumed the location and type of broken rails was proved by the experiment of prototype and operation line tests. We concluded that this system can detect rail break section in which error span exist within${\pm}1m$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.264-272
• /
• 2016

In previous research, we analyzed traffic accident characteristics in the Chungcheong region through factor analysis, cluster analysis, and a questionnaire using traffic accident analysis system data to enhance Korea's traffic safety. Based on the analysis results, we investigated the design and application of traffic safety technology in non-urban areas in this study. Three technologies are proposed to improve traffic safety facilities for the region: a recognition light at pedestrian crossing works, a recognition light on the road for the underprivileged in traffic works, and a safety LED sign for operation of agricultural machine works. Each technology complements the light pollution problem about snow removal and road safety when applied to existing facilities in the non-urban areas. Solar-based indigenous technology is expected to contribute to road safety in rural areas.

• Journal of the Korea Computer Graphics Society
• /
• v.17 no.3
• /
• pp.9-19
• /
• 2011

Computing triangle-triangle intersections has been a fundamental task required for many 3D geometric problems. We propose a novel robust GPU algorithm to efficiently compute intersections in a large triangle set. The algorithm has three stages:k-d tree construction, triangle pair generation, and exact intersection computation. All three stages are executed on GPU except, for unsafe triangle pairs. Unsafe triangle pairs are robustly handled by CLP(controlled linear perturbation) on a CPU thread. They are identified by floating-point filtering while exact intersection is computed on GPU. Many triangles crossing a split plane are duplicated in k-d tree construction, which form a lot of redundant triangle pairs later. To eliminate them efficiently, we use a split index which can determine redundancy of a pair by a simple bitwise operation. We applied the proposed algorithm to computing 3D Minkowski sum boundaries to verify its efficiency and robustness.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.33-37
• /
• 2006

Since 1993, the civil aviation community through RTCA (Radio Technical Commission for Aeronautics) and the ICAO (International Civil Air Navigation Organization) have been working on the definition of GNSS augmentation systems that will provide improved levels of accuracy and integrity. These augmentation systems have been classified into three distinct groups: Aircraft Based Augmentation Systems (ABAS), Space Based Augmentation Systems (SBAS) and Ground Based Augmentation Systems (GBAS). The last one is an implemented system to support Air Navigation in CAT-I approaching operation. It consists of three primary subsystems: the GNSS Satellite subsystem that produces the ranging signals and navigation messages; the GBAS ground subsystem, which uses two or more GNSS receivers. It collects pseudo ranges for all GNSS satellites in view and computes and broadcasts differential corrections and integrity-related information; the Aircraft subsystem. Within the area of coverage of the ground station, aircraft subsystems may use the broadcast corrections to compute their own measurements in line with the differential principle. After selection of the desired FAS for the landing runway, the differentially corrected position is used to generate navigation guidance signals. Those are lateral and vertical deviations as well as distance to the threshold crossing point of the selected FAS and integrity flags. The Department of Applied Science in Naples has create for its study a virtual GBAS Ground station. Starting from three GPS double frequency receivers, we collect data of 24h measures session and in post processing we generate the GC (GBAS Correction). For this goal we use the software Pegasus V4.1 developed from EUROCONTROL. Generating the GC we have the possibility to study and monitor GBAS performance and integrity starting from a virtual functional architecture. The latter allows us to collect data without the necessity to found us authorization for the access to restricted area in airport where there is one GBAS installation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6214-6220
• /
• 2015

A track circuit has used stably more than 100 years for detecting train position, but solution of track circuit sort circuit incapacity due to a rust is necessary for side line in station yard, coast line and level crossing for conventional line in rural line. Domestically, Axle Counter System(ACS) has partially used for Hot Box System for high speed line and turnout for CBTC system. In contrast, most of countries has used ACS not only trunk line but also rural line and its application has increased for metro, electric car and industrial railway. In this paper, we has verified the operating status of ACS which installed with existing track circuit through log analsis to implement pilot application in mail track and turnout in station yard. And interface test with interlocking system has conducted at Obong shunting yard, as well as Cheongju station and has analyzed test result. Based on a test result, we made fail safe design, manufacturing skill and established system requirement specification for the smooth operation and maintenance.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.6
• /
• pp.539-546
• /
• 1999

A new integrated single-stage zero current switched(ZCS) quasi resonant convertedQRC) for the IX)wer f factor correction(PFCl converter is introduced in this paper. The power factor correction can be achieved by t the discontinuous conduction mod$\varepsilon$(DCM) operation of an input current. The proposed converter has the c characteristics of the good IX)wer factor, 10씨 line current harmonics, and tight output regulation. Furthern10re, t the ringing effect due to the output capacitance of the main switch can be eliminated by use of‘ active clamp c circuit. Therefore, the proIX)sed converter is expecttc'(] to be suitable for a compact power converter with a t tightly regulated output voltage requiring a switching frequency of more than several hundrtc'(]s kHz.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.1
• /
• pp.9-18
• /
• 2007

This paper proposes the modeling of sensorless drive system using 120 degree conduction method for IPM (Interior Permanent Magnet) BLDC motors and analyzes characteristics of the terminal voltage that is used to detect the rotor position. This paper shows that the ZCP (Zero-Crossing Point) of the measured terminal voltage used In sensorless control is ahead of that of the back EMF of IPM motors because they have a saliency. This research also analyzes that the amount of position detection error is related to saliency, rotor speed, and load condition. In addition, this paper shows that motors have bigger advance angles than we have expected because the ZCP of terminal voltage precedes the actual ZCP, and under operation conditions such as heavy load and high speed it may generate abnormal currents that flow toward opposite direction after phase current becomes zero.

• Journal of the Korean Society for Railway
• /
• v.19 no.4
• /
• pp.555-563
• /
• 2016

Line capacity of railways is a core criterion to decide maximum trips in accordance with traffic demand and a priority in railway investment to improve transportation capability. Particularly, because two operators will start revenue services in the HSR from mid-2016, the line capacity should be carefully calculated and controlled to avoid conflicts between the maximum number of KTXs, and the number needed to guarantee the effective competition of the operators. Meanwhile, there have been many arguments about calculating the line capacity, because this number is affected by the number of trips by train types, stopping pattern and dwell time in each station, journey time, crossing or passing, safety headway between trains, etc. To deal successfully with these kinds of problems, this study proposes a simulation method to calculate the line capacity that considers train operation according to the operator's service policies.

• Journal of IKEEE
• /
• v.26 no.4
• /
• pp.659-670
• /
• 2022

An 830-Mb/s/pin transceiver for a controller supporting ×32 LPDDR2 memory is designed. The transmitter consists of eight unit circuits has an impedance in the range of 34Ω ∽ 240Ω, and its impedance is controlled by an impedance correction circuit. The transmitted DQS signal has a phase shifted by 90° compared to the DQ signals. In the receive operation, the read time calibration is performed by per-pin skew calibration and clock-domain crossing within a byte. The implemented transceiver for the LPDDR2 memory controller is designed by using a 55-nm process using a 1.2V supply voltage and has a maximum signal transmission rate of 830 Mb/s/pin. The area and power consumption of each lane are 0.664 mm² and 22.3 mW, respectively.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.6
• /
• pp.635-641
• /
• 2019

Domestic southwest offshore wind farms have problems such as the reduction in fishing rights by prohibiting vessel traffic, which delays their development. As such, there is a need to develop offshore windfarms in Europe to permit the passage of vessels and fishing operations in specific offshore windfarm areas. In this study, we used the environmental stress (ES model) and the IALA Waterway Risk Assessment Program (IWRAP) to determine the ratio of risk to the route type (cross pattern, grid pattern) and traffic volume (present, 3 times, 5 times and 10 times) to derive the risk factors of specific vessels for offshore windfarms. As a result, ship operators' risk related to offshore windfarms did not rise in both route types and there was no significant difference in the annual probability of collision in the present traffic volume. In conditions that increased traffic volume by 3 times, 5 times and 10 times, the risk ratio increased as ship operator risk and collision probability increased at the crossing points. Furthermore, when the traffic volume of the ship increased, the risk could be more effectively distributed in the grid route compared to the cross route. The results of this study are expected to apply to the operation type, route operation method, safety measures, etc. in offshore wind farms.