• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.8
• /
• pp.658-666
• /
• 1989

In this paper, an efficient algorithm for estimation volume and surface area and a reconstruction algorithm for 3-dimensional graphics are presented.In order to improve computing efficiency, the graph theory is utilized and the algorithm to obtain proper contour points is developed by considering several tolerances. Search for the contour points is limited by the change of curvature of cross sectional contour to provide efficiency in searching the minimum cost path. In computer simulation of these algorithms, the results show that, for the tolerance values of 1.001 and 1.002, the execution time reduced to 66%-80% and the error for the measured value is less than 3%. The reconstructed 3-dimensional images from the cross sections can be analyzed in many directions using the graphic scheme.

• Korean Journal of Clinical Laboratory Science
• /
• v.36 no.2
• /
• pp.121-126
• /
• 2004

The primary goal of six sigma is to improve patient satisfaction, and thereby profitability, by reducing and eliminating defects. Defects may be related to any aspect of customer satisfaction: high product quality, schedule adherence, cost minimization, process capability indices, defects per unit, and yield. Many six sigma metrics can be mathematically related to the others. Literally, six means six standard deviations from the mean or median value. As applied to quality metrics, the term indicates that failures are at least six standard deviations from the mean or norm. This would mean about 3.4 failures per million opportunities for failure. The objective of six sigma quality is to reduce process output variation so that on a long term basis, which is the customer's aggregate experience with our process over time, this will result in no more than 3.4 defect Parts Per Million(PPM) opportunities (or 3.4 Defects Per Million Opportunities. For a process with only one specification limit (upper or lower), this results in six process standard deviations between the mean of the process and the customer's specification limit (hence, 6 Sigma). The results of applicative six sigma experiment studied on 18 items TP, ALB, T.B, ALP, AST, ALT, CL, CK, LD, K, Na, CRE, BUN, T.C, GLU, AML, CA tests in clinical chemistry were follows. Assessment of process performance fits within six sigma tolerance limits were TP, ALB, T.B, ALP, AST, ALT, CL, CK, LD, K, Na, CRE, BUN, T.C, GLU, AML, CA with 72.2%, items that fit within five sigma limits were total bilirubin, chloride and sodium were 3 sigma. We were sure that the goal of six sigma would reduce test variation in the process.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.3
• /
• pp.205-211
• /
• 2005

This study was carried out to construct cold-tolerance characteristics. The RILs were developed from progenies of a cross between cold-susceptible Tongil-type rice variety, Milyang 23 and cold-tolerant Japonica rice variety, Stejaree 45 by single seed descent methods. The 175 RILs $(F_8)$ were evaluated for cold tolerance traits by field screening under cold-water irrigation. Frequency distribution of RILs in leaf discoloration, heading delay, culm length reduction and number of spikelets reduction displayed nearly normal distributions with transgressive segregations to either side of parents, while the spikelet fertility reduction and panicle exsertion at low-temperature showed the more or less skewed continuous distribution toward the susceptible parent. Higher heritabilities over $60\%$ were observed in leaf discoloration, spikelet fertility reduction, panicle exsertion, while relatively lower heritabilities less than $40\%$ were observed in culm length reduction, number of spikelets reduction and grain yield reduction. Some cold-tolerance RILs were selected effectively by cold water irrigation, which are expected to be good materials in breeding program for cold tolerance.

• Journal of Bio-Environment Control
• /
• v.15 no.4
• /
• pp.421-427
• /
• 2006

To investigate the relationships among the traits related seed dormancy in rice, viviparous germination, dry-heat tolerance and seed longevity were tested using 164 M/G RILs ($F_{17}$) derived from the cross between Milyang 23 (Indica/Japonica) and Gihobyeo (Japonica). At 40 days after heading, the viviparous germination rates of Milyang 23 and Gihobyeo were 0.0 and 7.0%, respectively. The averaged viviparous germination rate of 164 MIG RILs was 3.2%, and their range was from 0.0 to 50.9%. In dry-heat treatment at $90^{\circ}C$ for 24 h followed by the pre-drying at $40^{\circ}C$ for 2 days, Milyang 23 showed higher germinability (98.6%,2.7 days to $T_{50}$) than Gihobyeo (37.6%, 12.9 days to $T_{50}$), and the mean germination rate of 164 M/G RILs was 72.4%. In 54 months after harvest, the germinability in Milyang 23 and Gihobyeo were 90% and 0%, and 71 lines among 164 M/G RILs showed the germinability over 90%. The relationship between seed longevity and dry-heat tolerance was linearly correlated with high positive correlation coefficient. The relationships between seed longevity and viviparous germination, and viviparous germination and dry-heat tolerance were linearly correlated with high negative correlation coefficient. Milyang 23 had higher tolerance against high dry-heat, viviparous germination and long-term storage than Gihobyeo, and 164 M/G RILs showed the medium values of parents.

• Korean Journal of Exercise Nutrition
• /
• v.16 no.2
• /
• pp.65-71
• /
• 2012

Oxygen is the final acceptor of electron transport from fat and carbohydrate oxidation, which is the rate-limiting factor for cellular ATP production. Under altitude hypoxia condition, energy reliance on anaerobic glycolysis increases to compensate for the shortfall caused by reduced fatty acid oxidation [1]. Therefore, training at altitude is expected to strongly influence the human metabolic system, and has the potential to be designed as a non-pharmacological or recreational intervention regimen for correcting diabetes or related metabolic problems. However, most people cannot accommodate high altitude exposure above 4500 M due to acute mountain sickness (AMS) and insulin resistance corresponding to a increased levels of the stress hormones cortisol and catecholamine [2]. Thus, less stringent conditions were evaluated to determine whether glucose tolerance and insulin sensitivity could be improved by moderate altitude exposure (below 4000 M). In 2003, we and another group in Austria reported that short-term moderate altitude exposure plus endurance-related physical activity significantly improves glucose tolerance (not fasting glucose) in humans [3,4], which is associated with the improvement in the whole-body insulin sensitivity [5]. With daily hiking at an altitude of approximately 4000 M, glucose tolerance can still be improved but fasting glucose was slightly elevated. Individuals vary widely in their response to altitude challenge. In particular, the improvement in glucose tolerance and insulin sensitivity by prolonged altitude hiking activity is not apparent in those individuals with low baseline DHEA-S concentration [6]. In addition, hematopoietic adaptation against altitude hypoxia can also be impaired in individuals with low DHEA-S. In short-lived mammals like rodents, the DHEA-S level is barely detectable since their adrenal cortex does not appear to produce this steroid [7]. In this model, exercise training recovery under prolonged hypoxia exposure (14-15% oxygen, 8 h per day for 6 weeks) can still improve insulin sensitivity, secondary to an effective suppression of adiposity [8]. Genetically obese rats exhibit hyperinsulinemia (sign of insulin resistance) with up-regulated baseline levels of AMP-activated protein kinase and AS160 phosphorylation in skeletal muscle compared to lean rats. After prolonged hypoxia training, this abnormality can be reversed concomitant with an approximately 50% increase in GLUT4 protein expression. Additionally, prolonged moderate hypoxia training results in decreased diffusion distance of muscle fiber (reduced cross-sectional area) without affecting muscle weight. In humans, moderate hypoxia increases postprandial blood distribution towards skeletal muscle during a training recovery. This physiological response plays a role in the redistribution of fuel storage among important energy storage sites and may explain its potent effect on changing body composition. Conclusion: Prolonged moderate altitude hypoxia (rangingfrom 1700 to 2400 M), but not acute high attitude hypoxia (above 4000 M), can effectively improve insulin sensitivity and glucose tolerance for humans and antagonizes the obese phenotype in animals with a genetic defect. In humans, the magnitude of the improvementvaries widely and correlates with baseline plasma DHEA-S levels. Compared to training at sea-level, training at altitude effectively decreases fat mass in parallel with increased muscle mass. This change may be associated with increased perfusion of insulin and fuel towards skeletal muscle that favors muscle competing postprandial fuel in circulation against adipose tissues.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.4
• /
• pp.371-384
• /
• 1982

Highly cold tolerant varieties are requested not only at high latitute cool area but also tropical high elevated areas, and the required tolerance is different from location to location. IRRI identified 6 different types of cold tolerance required in the world for breeding purpose; a) Hokkaido type, b) Suweon type, c) Taipei 1st season type, d) Taipei 2nd season type, e) Tropical alpine type and, f) Bangladesh type. The cold tolerance requested in Korea is more eargent in Tongil group cultivars and their required tolerance is the one such as the physiological activities at low temperature are as active as in Japonica group cultivars at least during young seedling stage and reproduction stage. With conventional Japonica cultivars, such cold tolerant characters are requested as short growth duration but stable basic vegetative growth, less sensitive to high temperature and less prolonged growth duration at low temperature. The methods screening for cold tolerance were developed rapidly after the Tongil cultivar was reliesed. The facilities of screening for cold tolerance, such as, low temperature incubator, cold water tank, growth cabinet, phytotron, cold water nursery in Chuncheon, breeding nursery located in Jinbu, Unbong and Youngduk, are well established. Foreign facilities such as, cold water tank with the rapid generation advancement facilities, cold nurseries located in Banaue, Kathmandu and Kashimir may be available for the screening of some limitted breeding materials. For the reference, screening methods applied at different growth stages in Japan are introduced. The component characters of cold tolerance are not well identified, but the varietal differences in a) germinability, b) young seedling growth, c) rooting, d) tillering, e) discolation, f) nutrition uptake, g) photosynthesis rate, h) delay in heading, i) pollen sterility, and j) grain fertility at low temperature are reported to be distinguishable. Relationships among those traits are not consistent. Reported studies on the inheritance of cold tolerance are summarized. Four or more genes are controlling low temperature germinability, one or several genes are controlling seedling tolerance, and four or more genes are responsible for the pollen fertility of the rice treated with cold air or grown in the cold water nursery. But most of those data indicate that the results may come out in different way if those were tested at different temperature. Many cold tolerant parents among Japonicas, Indicas and Javanicas were identified as the results of the improvement of cold tolerance screening techniques and IRTP efforts and they are ready to be utilized. Considering a) diversification of germ plasm, b) integration of resistances to diseases and insects, c) identification of adaptability of recommending cultivars and, d) systematic control of recommending cultivars, breeding strategies for short term and long term are suggested. For short term, efforts will be concentrated mainly to the conventional cultivar group. Domestic cultivars will be used as foundation stock and ecologically different foreign introductions such as from Hokkaido, China or from Taiwan, will be used as cross parents for the adjustment of growth durations and synthsize the prototype of tolerances. While at the other side, extreme early waxy Japonicas will be crossed with the Indica parents which are identified for their resistances to the diseases and insects. Through the back corsses to waxy Japonicas, those Indica resistances will be transfered to the Japonicas and these will be utilized to the crosses for the improvement of resistances of prototype. For the long term, efforts will be payed to synthsize all the available tolerances identified any from Japonicas, Indicas and Javanicas to diversify the germ plasm. The tolerant cultivars newly synthsized, should be stable and affected minimum. to the low temperature at all the growing stages. The resistances to the diseases and insects should be integrated also. The rapid generation advancement, pollen culture and international cooperations were emphasized to maximize the breeding efficiency.

• Corrosion Science and Technology
• /
• v.13 no.2
• /
• pp.62-69
• /
• 2014

A huge number of carbon steel piping components installed in the secondary system of nuclear power plants are exposed to aging mechanisms such as FAC (Flow-Accelerated Corrosion), Cavitation, Flashing, and LDIE (Liquid Droplet Impingement Erosion). Those aging mechanisms can lead to thinning of the piping components. To manage the wall thinning degradation, most of utilities in the world predict the wall thinning rate based on the computational program such as CHECWORKS, COMSY, and BRT-CICERO, evaluate the UT (Ultrasonic Test) data, and determine next inspection timing, repair or replacement, if needed. There are several evaluation methods, such as band, blanket, and strip methods, commonly used for determining the wear of piping components from single UT inspection data. It has been identified that those single UT evaluation methods not only do not consider the manufacturing features of pipes, but also may exclude the data of the most thinned point when determining the representative wear rate of piping components. This paper describes a newly developed single UT evaluation method, E-Cross method, for solving above problems and introduces application examples for several pipes and elbows. It was identified that the E-Cross method using the length and width of UT data excluded the most thinned points appropriate as the single UT evaluation method for thinned piping components.

• Architectural research
• /
• v.9 no.1
• /
• pp.31-37
• /
• 2007

This study presents the so-called Modified Allowable Stress Design (MASD) method for structural designs. The objective of this study is to qualitatively estimate uncertainties of tensile steel member's cross-sectional structural designs and find the optimal resulting design which can resist all uncertainty cases. The design parameters are assumed to be interval associated with lower and upper bounds and consequently interval methods are implemented to non-stochastically produce design results including the structural uncertainties. By seeking optimal uncertainty combinations among interval parameters, engineers can qualitatively describe uncertain design solutions which were not considered in conventional structural designs. Under the assumption that structures have basically uncertainties like displacement responses, the safety range of resulting designs is represented by lower and upper bounds depending on given tolerance error and structural parameters. As a numerical example uncertain cross-sectional areas of members that can resist applied loads are investigated and it demonstrates that the present design method is superior to conventional allowable stress designs (ASD) with respect to a reliably structural safety as well as an economical material.

• Journal of Applied Biological Chemistry
• /
• v.59 no.1
• /
• pp.75-81
• /
• 2016

Glutaraldehyde was used as a cross-linking agent for immobilization of purified ${\alpha}$-amylase from Exiguobacterium sp. DAU5. Befitting concentration of glutaradehyde and cross-linking time is the key to preparation of cross-linking chitosan beads. Based on optimized immobilization condition for ${\alpha}$-amylase, an overall yield of 56% with specific activity of 2,240 U/g on chitosan beads and 58% with specific activity of 2,320 U/g on chitosan-carbon beads was obtained. The optimal temperature and pH of each immobilized enzyme activity were $50^{\circ}C$ and 50 mM glycine-NaOH buffer pH 8.5, respectively. Those retained more than 75 and 90% of its maximal enzyme activity at pH 7.0-9.5 and after incubation at $50^{\circ}C$ for 1 h, respectively. In addition, the immobilization product showed higher organic-solvent tolerance than free enzymes. The mode of hydrolyzing soluble starch revealed that the ${\alpha}$-amylase possessed high hydrolyzing activity. These results indicate that chitosan is good support and has broad application prospects of enzyme immobilization.

• Korean Journal of Medicinal Crop Science
• /
• v.14 no.2
• /
• pp.107-112
• /
• 2006

Two Atractylodes species, A. japonica Koidz. ex Kitam. (AJ) and A. macrocephala Koidz (AM) were used in this study. AJ population had higher amounts of Sesquiterpenoids and stronger tolerance to root rot but less vigor of root growth than AM population. Two populations (AJ and AM) were crossed to make interspecific hybrid population. A total of 98 lines propagated clonally were selected from a cross of AJ and AM, and evaluated for contents of sesquiterpenoids, atractylon (ATLN) and atractylenolide III (AT3) using high performance liquid chromatography (HPLC), and growth characters such as plant height, stem number and root weight. HPLC profiles of the hybrids were compared with those of parent plants, and it demonstrated the production of introgression hybrid by crossing between AJ and AM. Of 98 clonal lines,10 lines were selected by 10% level based on the growth vigor and tolerance to root rot, and AJM2102-51 line showed the heaviest root weight (117.1 g/plant) among them. A total of 98 hybrid lines contained on average $0.16\;{\pm}\;0.10\;mg/g$ of $AT3,\;2.00\;{\pm}\;1.37\;mg/g$ of ATLN, and $2.16\;{\pm}\;1.40\;mg/g$ of total sesquiterpenoids, showing high coefficients of variation (above 65%). Ten lines having high contents of sesquiterpenoids were selected, and AJM2101-15 had the highest amount (9.83 mg/g) of ATLN, and showed 40.8 g/plant of root weight similar to mean value (39.9 g/plant) of hybrid lines. The result showed that the introgression of both characters of vigorous growth from AM and high sesquiterpenoids content from AJ could be possible to make new hybrid lines by crossing between AJ and AM.