• The Korean Journal of Pain
• /
• v.24 no.4
• /
• pp.205-215
• /
• 2011

Background: Interventional pain management (IPM) is a branch of medical science that deals with management of painful medical conditions using specially equipped X-ray machines and anatomical landmarks. Interventional physiatry is a branch of physical medicine and rehabilitation that treats painful conditions through intervention in peripheral joints, the spine, and soft tissues. Methods: A cross-sectional study was conducted using three years of hospital records (2006 to 2008) from the Physical Medicine and Rehabilitation Department at Chittagong Medical College Hospital in Bangladesh, with a view toward highlighting current interventional pain practice in a tertiary medical college hospital. Result: The maximum amount of intervention was done in degenerative peripheral joint disorders (600, 46.0%), followed by inflammatory joint diseases (300, 23.0%), soft tissue rheumatism (300, 23.0%), and radicular or referred lower back conditions (100, 8.0%). Of the peripheral joints, the knee was the most common site of intervention. Motor stimulation-guided intralesional injection of methylprednisolone into the piriformis muscle was given in 10 cases of piriformis syndrome refractory to both oral medications and therapeutic exercises. Soft tissue rheumatism of unknown etiology was most common in the form of adhesive capsulitis (90, 64.3%), and is discussed separately. Epidural steroid injection was practiced for various causes of lumbar radiculopathy, with the exception of infective discitis. Conclusion: All procedures were performed using anatomical landmarks, as there were no facilities for the C-arm/diagnostic ultrasound required for accurate and safe intervention. A dedicated IPM setup should be a requirement in all PMR departments, to provide better pain management and to reduce the burden on other specialties.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.2
• /
• pp.106-111
• /
• 2012

Purpose: The aim of this sturdy was to assess the prevalence and change in pathologic findings in the maxillary sinus by using preoperative and postoperative cone-beam computed tomography (CBCT). Methods: The subjects included 83 patients with maxillary sinus abnormalities who underwent orthognathic surgery between January 2010 to December 2010. The CBCT analyses were classified according to the thickness of maxillary sinus membrane; Normal (membrane thickness<2 mm), mucosal thickening (membrane thickness ${\geq}2mm$ and <6 mm), partial opacification (membrane thickness>6 mm but not complete), total opacification, and polypoidal mucosal thickening. The diameters of the maxillary sinus ostium on the coronal cross-sectional view were also calculated. Results: Out of 166 maxillary sinuses in 83 patients, 42 (25.3%) maxillary sinuses before surgery and 37 (22.3%) maxillary sinuses after surgery showed abnormalities. A decrease in the diameters of maxillary ostium was observed after surgery (P<0.05). However, there was no significant difference in mucosal thickness both, preoperatively and postoperatively. Conclusion: The orthognathic surgery didn't deteriorate the maxillary sinus abnormaility. Despite the low prevalence of sinus complications in orthognathic surgery, all the patients should be informed of the possibility of sinusitis that could require the surgical intervention before surgery.

• Imaging Science in Dentistry
• /
• v.48 no.2
• /
• pp.103-109
• /
• 2018

Purpose: To analyze cone-beam computed tomography (CBCT) use, indications, and exposure parameters in San $Jos{\acute{e}}$, Costa Rica. Materials and Methods: A cross-sectional study was performed. All CBCT examinations over a period of 6 months at 2 radiological centers in San $Jos{\acute{e}}$, Costa Rica were evaluated. The examinations were performed with Veraview EPOC X550 and Veraviewepocs 3D R100 equipment. The patients' age and sex, clinical indication for CBCT, region of interest (ROI), repeat examinations, specialty of the referring dentist, field-of-view (FOV), tube voltage (kV), tube current (mA), and radiation dose (${\mu}Gy$) were evaluated. Patients were classified by age as children (${\leq}12years$), adolescents(13-18 years), and adults(${\geq}19years$). Results: The mean age of the 526 patients was 49.4 years. The main indications were implant dentistry and dental trauma. The most frequent ROIs were posterior, while anterior ROIs were much less common. The highest percentage of repeat examinations was in children. Fifty-six percent of the referring dentists were specialists. The most commonly used FOV was small. The mean tube voltage and current were 79.8 kV and 7.4 mA for Veraview EPOC X550 and 89.9 kV and 6 mA for Veraviewepocs 3D R100, respectively. The mean doses for children, adolescents, and adults were $6.9{\mu}Gy$, $8.4{\mu}Gy$, and $7.8{\mu}Gy$, respectively. Conclusion: Although CBCT was most commonly used in adults for implant dentistry, most repeat examinations were in children, and the highest mean dose was in adolescents. Additional dose optimization efforts should be made by introducing low-dose protocols for children and adolescents.

• Perspectives in Nursing Science
• /
• v.12 no.2
• /
• pp.115-123
• /
• 2015

Purpose: This study aimed to investigate the quality of patient-centered nursing care (PCNC) among women with breast cancer at a cancer center in Seoul, Korea. Methods: In a cross-sectional survey design, 223 women with breast cancer were recruited from the oncology surgery unit. The Korean version of the oncology patients' perceptions of the quality of nursing care scale, which is conceptualized in four sub-dimensions (individualization, proficiency, responsiveness, and coordination) was used for measurement. Data were analyzed using descriptive statistics and ANOVA. Results: The participants were all women, with a mean age of 51.3 years. The mean score of PCNC was high and significantly different from each other according to age group. Breast cancer women, who had mastectomy, were satisfied highly in terms of proficiency and responsiveness care, but less satisfied with individualization and coordination care than those of other women. Conclusion: The findings of this study show the quality of cancer nursing care, especially focusing on patient-centeredness, can be measured from the patients'perspective. The individualized and coordinated nursing care is considered to be the core of quality cancer care implying patient-centeredness. Based on the findings of this study, more research is necessary to explore the patients' view of quality cancer care and to test the effects of PCNC within the context of comparative effectiveness.

• Corrosion Science and Technology
• /
• v.18 no.2
• /
• pp.55-60
• /
• 2019

Corrosion failure in the convection part of peak load boiler (PLB) of the district heating system led to water leakage. Herein, Internal Rotary Inspection System (IRIS) inspection was employed to examine wall thinning and the cause of leakage in the flue tube. The corrosive products of the turbulator and tube were investigated using scanning electron microscope combined with energy dispersive spectroscopy, X-ray diffraction, and inductively coupled plasma (ICP). Majority of the serious corrosion damage was observed near the turbulator located in the upper flue tube. ICP analysis of the boiler water revealed oxide formation of sodium chloride in the lower end part of the flue tube. A cross-sectional view of the turbulator revealed the presence of double-layers of the oxide film, indicating environmental change during operation associated with water leakage. The outer surface of the turbulator consisted of the acid oxides such as $NO_x$ and $SO_x$ along with sodium and chloride ions. Dew-point corrosion is hypothesized as the main cause for the formation of acid oxides in the region of contact of the flue tube and the turbulator.

• Safety and Health at Work
• /
• v.13 no.2
• /
• pp.141-147
• /
• 2022

Background: On the basis of its role for the development of occupational health research, information, good practices, the International Commission on Occupational Health (ICOH) launched the present survey to collect information on public health and prevention policies put in place by the governments of the countries in the world to contain the pandemic. Methods: A cross-sectional study was conducted through an online questionnaire focused on COVID-19 data, public health policies, prevention measures, support measures for economy, work, and education, personal protective equipment, intensive care units, contact tracing, return to work, and the role of ICOH against COVID-19. The questionnaire was administered to 113 ICOH National Secretaries and senior OSH experts. Collected data refer to the period ranging from the beginning of the pandemic in each country to June 30, 2020. Results: A total of 73 questionnaires from 73 countries around the world were considered valid, with a 64.6% response rate. Most of the respondents (71.2%) reported that the state of emergency was declared in their country, and 86.1% reported lockdown measures. Most of the respondents (66.7%) affirmed that the use of face masks was compulsory in their country. As for containment measures, 97.2% indicated that mass gatherings (meetings) were limited. Regarding workplace closing, the most affected sector was entertainment (90.1%). Conclusion: The results of this survey are useful to gain a global view on COVID-19 policy responses at country level.

• Journal of the Korea Society for Simulation
• /
• v.18 no.4
• /
• pp.219-225
• /
• 2009

The primary purpose of this study is to build computer models referring overall flow of complex and various semiconductor wafer manufacturing process and to implement a educational model which operates with a presentation tool showing device design. It is important that Korean semiconductor industries secure high competitive power on efficient manufacturing management and to develop technology continuously. Models representing the FAB processes and the functions of each process are developed for Seoul National University Semiconductor Research Center. However, it is expected that the models are effective as visually educational tools in Korean semiconductor industries. In addition, it is anticipated that these models are useful for semiconductor process courses in academia. Scalability and flexibility allow semiconductor manufacturers to customize the models and perform simulation education. Subsequently, manufacturers save budget.

• Korean Journal of Materials Research
• /
• v.11 no.7
• /
• pp.556-561
• /
• 2001

We prepared a new a SOS(silicon-on-silicide) wafer pair which is consisted of Si(100)/1000$\AA$-NiSi Si (100) layers. SOS can be employed in MEMS(micro- electronic-mechanical system) application due to low resistance of the NiSi layer. A thermally evaporated $1000\AA$-thick Ni/Si wafer and a clean Si wafer were pre-mated in the class 100 clean room, then annealed at $300~900^{\circ}C$ for 15hrs to induce silicidation reaction. SOS wafer pairs were investigated by a IR camera to measure bonded area and probed by a SEM(scanning electron microscope) and TEM(transmission electron microscope) to observe cross-sectional view of Si/NiSi. IR camera observation showed that the annealed SOS wafer pairs have over 52% bonded area in all temperature region except silicidation phase transition temperature. By probing cross-sectional view with SEM of magnification of 30,000, we found that $1000\AA$-thick uniform NiSi layer was formed at the center area of bonded wafers without void defects. However we observed debonded area at the edge area of wafers. Through TEM observation, we found that $10-20\AA$ thick amourphous layer formed between Si surface and NiSix near the counter part of SOS. This layer may be an oxide layer and lead to degradation of bonding. At the edge area of wafers, that amorphous layer was formed even to thickness of $1500\AA$ during annealing. Therefore, to increase bonding area of Si NiSi ∥ Si wafer pairs, we may lessen the amorphous layers.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.4
• /
• pp.421-439
• /
• 2003

Statement of problem : It is difficult to obtain a good titanium casting body using the traditional sprue design because of high melting point of Ti, and the low fluidity and high reactivity of molten Ti. Purpose : A new sprue design for titanium casting bodies needs more trial and error. In order to decrease the number of trial and error, computer simulation(MAGMASOFT, Magmasoft Giessereitechnologie GmbH, Achen, Germany) was used to optimize sprue design in U-shaped implant superstructures. Material and method : Five kinds of sprue were examined for the design of the sprue former for titanium casting: Sprue design A(sprue length 4 mm, rectangular shape, 4 sprues), Sprue design B(sprue length 4 mm. round shape. radius 2 mm, 7 sprues), Sprue design C (sprue length 2 mm, round shape, radius 2 mm, 7 sprues). Sprue design D (sprue length 2 mm, cone shape, large radius 3mm. small radius 2mm, 7 sprues), and Sprue design E( sprue length 2 mm. one unit channel shape). Sprue design F(sprue length 2mm, one unit channel shape) was also examined for the design of the customized sprue former in the Biotan system(Schutz Dental Gmbh, Germany). The casting bodies were taken in Sprue design A, Sprue design D, Sprue design E, and Sprue design F in the Biotan casting system. The numerically predicted defects were compared with the experimental dental castings by the radiographic and sectional view observations. Results : 1. According to the result of computer simulation, turbulence during mold filling was decreased in the sequence of Sprue design F, Sprue design E, Sprue design D, Sprue design C, Sprue design B, and Sprue design A. 2. The calculated solidification time contours indicate that hot spot was moved from the casting body to the sprue button in the sequence of Sprue design A, Sprue design B, Sprue design C, Sprue design D, and Sprue design E. The filling pattern of Sprue design F was similar to that of Sprue design E. 3 The predicted filling pattern shows that less turbulence was found in the customized sprue former than in the standard sprue former. 4. According to the results of the radiographic and cross sectional observations, casting defects less than 1mm were found at the center of a casting body with Sprue design E and Sprue design F. However, larger casting defects of 4mm were found in a casting with Sprue design A. 5. The predicted casting porosity was similar to that of the real casting. Conclusion : One unit channel-type and customized sprue former can be recommended. Further research and developement of various sprue designs using computer simulation in necessary to optimize casting design, in order to reduce the formation of casting defects in implant titanuim super-structures.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3D
• /
• pp.363-373
• /
• 2011

With rapid economic development, general demand and interest in surroundings that consist of our lives have grown gradually. In addition, as there has been increased social interest in creating landscape of roads, which considers all important factors from the user's view including accessibility, safety, and psychological stability, efforts to improve quality of roads are required. Therefore it is needed to establish standards on safe and comfort road design based on sensibility satisfaction of road users rather than based on standardized road design guidance from the engineering perspective. To this end, research was carried out to analyze sensibility satisfaction of users about road landscape focused on elements of road cross section in a city. It identified relation between sensibility satisfaction and the elements by using principal and cluster analysis, and the multiple regression models. It also found that user's satisfaction about roads and a road landscape is high with road width (3~5 meters), clear zone (2.2~3.9 meters), road central garden (1.05~1.9 meters), shoulder (0.55~1.43 meters), median (0.65~1.625 meters), the number of travel lanes (2~5), height of trees at the central garden (6.4~15 meters) and height of buildings surrounding roads (18~44 meters or 6~15 floors).