References
- Wang RR, Fenton A. Titanium for prosthodontic applications: a review of the literature. 1996;27(6):401-8
- Okabe T, Okubo C, Watanabe I, Okuno O, Takada Y. The present status of dental titanium casting. JOM 1998;50(9);24-38
- Smickley RJ, Bednarz LP. Titanium Alloys in Surgical Implants. ASTM STP 1983;796:76
- Wataha JC. Biocompatibility of dental casting alloys : a review. J Prosthet Dent 2000;83:223-234 https://doi.org/10.1016/S0022-3913(00)80016-5
- English C. An overview of implant hardware. J Am Dent Assoc 1990;121:582
- Goran S. Gaynour S, Jon ED. Cytotoxicity of dental alloys, metals and ceramics assessed by Millipore filter. agar overlay and MTT tests. J Prosthet Dent 2000; 84:229-236 https://doi.org/10.1067/mpr.2000.107227
- Lautenschlager EP, Monaghan P. Titanium and titanium alloy as dental materials. Int Dent J 1993;43(3):245-53
- Russell RW, Yiming L. In vitro evaluation of biocompatibility of experimental titanium alloys for dental restorations. J Prosthet Dent 1998;80:495-500 https://doi.org/10.1016/S0022-3913(98)70018-6
- Foti B, Tavitian P. Tosello A. Bonfil JJ, Franquin JC. Polymetallism and osseointergration in oral implantology. J Oral Rehabilitation 1999;26(6):495 https://doi.org/10.1046/j.1365-2842.1999.00404.x
- Ricardo AZ, Guilherm EP. Itamar F. Joao MD. Corrosion-fatigue life of commercially pure titanium and Ti-6Al-4V alloys in different storage environments. J Prosthet Dent 2000;84:274-279 https://doi.org/10.1067/mpr.2000.108758
- Wataha JC, Malcolm CT. Effect of alloy surface composition on release of elements from dental casting alloys. J Oral Rehabilitation. 1996;23:583-589 https://doi.org/10.1046/j.1365-2842.1996.d01-204.x
- Lemons JE. Lucas LC, Johansson BI. Intraoral corrosion resulting from coupling dental implants and restorative metallic systems. Implant Dent 1992;1(2)107-112
- Bumgardner .JD. Johansson BI. Galvanic corrosion and cytotoxic effects of amalgam and gallium alloys coupled to titanium. Eur J Oral Sci 1996;104(3) :300-308 https://doi.org/10.1111/j.1600-0722.1996.tb00081.x
- Bumgardener JD. Johansson BI. Effects of titanium-dental restorative alloy galvanic couples on cultured cells. J Biomed Mater Res 1998;43(2)184-91
- Geis-Gerstorfer J. Weber H, Sauer KH. In vitro substance loss due to galvanic corrosion in Ti implant/Ni-Cr supraconstruction systems. Int J Oral Maxilofacial Implants 1989;4(2):119-123
- Reclaru L, Meyer JM. Study of corrosion between a titanium implant and dental alloys. J Dent 1994;22:159-168 https://doi.org/10.1016/0300-5712(94)90200-3
- Spiros Z. Effect of pressure of helium. argon, krypton, and xenon on the porosity, microstructure and mechanical properties of commercially pure titanium castings. J Prosthet Dent 2000;84:575-582 https://doi.org/10.1067/mpr.2000.109479
- James JS. Stephen JA. Robert KF. George BP. A comparative study of the centrifugal and vacuum-pressure techniques of casting removable partial denture frameworks. J Prosthet Dent 1981;(45):18-23
- Johnson A. The effect of sprue design and alloy type on the fit of three-unit metal/ceramic bridges. Eur J Prosthodont Restor Dent 1995;3(6):241-245
- Kohler C. Richter G. The Sprue behavior of nonprecious metals. Zahn Mund Keiferheilkd Zentralbl 1989;77(2):145-152
- Syverud M.Hero H. Mold filling of titanium castings using investments with different gas permeability. Dent Mat 1995;11:14-18 https://doi.org/10.1016/0109-5641(95)80003-4
- Kiyoshi T. Seijiro M, Satoyuki K, Yuki Y, Hiroshi K, Yoshio K. Efficacy of gas purging for titanium casting. Dent Mat J 1994;13(2) :206-213 https://doi.org/10.4012/dmj.13.206
- Verrett RG, Duke ES. The effect of sprue attachment design on castabiJity and porosity. J Prosthet Dent 1989;61:418-424 https://doi.org/10.1016/0022-3913(89)90006-1
- Bernett CA. Maguire H. Sprue design in removable partial denture casting. J Dent 1996;24:99-103 https://doi.org/10.1016/0300-5712(95)00050-X
- Nobuyuki I. Atsuko T. Harutoshi D. The recent development in implantlogy. superstructure using pure titanium. Quintessence of Dental Technology. 1988;13:217-222
- Richter W, Lubberich AC. The titanium superstructure on the intraosseous implant. Quintessence of Dental Technology. 1991;16:1421-1429
- Takashi O, Yuzuru S, Takeshi B, Yohichi U. Quality of cast pure titanium denture base as a prosthetic appliance. Quintessence of Dental Technology. 1988;13:187-190
- Wataha JC, Malcolm CT. Effect of alloy surface composition on release of elements from dental casting alloys. J Oral Rehabilitation. 1996;23:583-589 https://doi.org/10.1046/j.1365-2842.1996.d01-204.x
- Suzuki K, Nishikawa K, Watakabe S. Mold filling and solidification during centrifugal precision casting of Ti-6al-4v alloys. Materials Transactions. 1970;37:1793-1801
- Magnitskiy ON. Casting properties of titanium alloys. Federal Scientific and technical information springfield Va 22151:5-6
- Suzuki KI. Nnishikawa K. Watakabe S. Mold filling and solidification during centrifugal precision casting of Ti-6Al-4V alloys. Materials Transactions JIM 1996;37:1793-1801
- Chai TI. Stein RS. Porosity and accuracy of multi-unit titanium castings. J Prosthet Dent 1995;73:534-541 https://doi.org/10.1016/S0022-3913(05)80112-X
- Watanabe I, Watkins JH. Nakajima H, Atsuta M, Okabe T. Effect of pressure difference on the quality of titanium casting. J Dental Research 1997:76(3):773-779
- Chan D, Guillory V, Blackman R, Chung KH. The effects of sprue design on the roughness and porosity of titanium castings. J Prosthet Dent 1997;78(4):400-404 https://doi.org/10.1016/S0022-3913(97)70048-9
- Jang KS. Youn SJ. Kim YS. Comparison of castability and surface roughness of commercially pure titanium and cobaltchromium denture frameworks. 2001;86(7) :93-98
- al-Mesmar HS. Morgano SM. Mark LE. Investigation of the effect of three sprue design on the porosity and the completeness of titanium cast removable partial denture frameworks. J Prosthet Dent 1999;82(1):15-21 https://doi.org/10.1016/S0022-3913(99)70126-5
- Cecconi BT. Koppen RG. Pheonix RD. Ceconni ML. Casting titanium partial denture frameworks : A radiographic evaluation. J Prosthet Dent 2002;87(3) :277-80 https://doi.org/10.1067/mpr.2002.122275
- Iwata Y, Tozawa K, Yamamoto Y. Filling velocities and defects of plate shaped die castings. J Japan Inst Light Metals. 1987;37:48
- Siauw TH. Davis AJ. Flow analysis in tapered runners. Tech. report paper No. G-T79-054. Transaction SDCE. 1979
- Davis KG. Magny JG. Trapping slag and solid nonmetallic materials in gating system. Tech. report PM-M-73-5-. CANMET. Eergy, Mines and resources Canada, 1973
- Niyama E. Calculation of solidification rate of shape casting by the flux-boundary method. IMONO. 1977;49(10):608-613
- Yoo SM. Lee DH. Kim JK. So CY. Hong CP. Three Dimensional Solidification Analysis in Large Steel Castings by Modified Finite Difference Method. J Korean Foundrymen's Society. 1991;11(1):54-62
- Engler S, Boenisch D, Kohler D. Metal and mold wall movement during solidification of cast iron. AFS Cast Metals Research Journal 1973;3:20-30
- Ohsasa K, Takahashi T. Radial contraction behavior of solidifying shell for cylindrical Al-3%Si alloy ingot. J Japan Inst Metals 1988;52(2):1012-1019 https://doi.org/10.2320/jinstmet1952.52.10_1012
- Toru O, Chikahiro O, Ikuya W, Osamu O, Yukyo T. The present status of dental titanum casting. J Minerals. metals & Materials 1998;50(9):24
- Sarjant RJ. Slack MR. J. Iron Steel Int., 1954;177:428
- Comini G, Del Guidice S. Int. J. Numer. Methods Eng. 1974;8:612
- Hong C, Umeda T, Kimura Y. Boundary Elements Springer-Verlag, Berlin. 1983;153
- Wu M, Augthun M, Schadlich-Stubenrauch J, Augthun M, Sahm PR, Spiekermann H. Computer aided prediction and control of shrinkage porosity in titanium dental castings. Dent Mater 1998;14:1998
- Lee JN. Diecasting process (1). Jumulgisul. Foundry Technology. 1979:3(2) :45-63
- Jang CH. Casting plan of Aluminum die castings. J Korean Foundrymen's Society 1994:14(8):294-304
- Kim KY. Die casting die designing(I)- Design of gate system-. J Korean Foundrymen's Society 1999;19(2):178-188
- Kim KY. Die casting die designing (II)-Design of overflow and gas vent- J Korean Foundrymen's Society 1999;19(3):277-283
- Smith WE, Wallace JF. Gating of die casting. AFS 1965
- Campbel J. Castings. Butterworth Heinemann, Oxford. 1991;30-73
- Kuroiwa A. Titanium technology. Quintessence of dental technology 2001 ;4(7):30-42
- Hong CP. Technical Reviews : State of the art of computer simulation based casting tehnology. J Korean Foundrymen's Society. 1995;15(1):5-13
- Kim SB. Hong CP. Technical review : Heat and fluid analyses and it's application to the design of the casting process. J Korean Foundrymen's Society. 1993;13(2)131-145
- Lee YC, Lee SM, Choi JK, Hong CP. Development and application of an automated water cooling system in the cyclic permanent mold casing process I: Modeling of mold filling and solidification sequences. J Korean Foundrymen's Society. 1998;18(2):179-189
- Lee YT, Kim SE, Hyun YT, Jung HW. The new dream material : Titanium. The Korea Metal Journal. 2001
- Hero H, Syverud M, Waarli M. Mold filling and porosity in castings of titanium. Dental Materials 1993;9:15 https://doi.org/10.1016/0109-5641(93)90098-B
- David CS. Optimizing casting simulation. Foundary Management & Technology 2001;129(12):34-38
- David CS. Eliminating modeling 'trial & error' with casting process optimization. Modern Casting 2001;91(8):37-42