• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.435-442
• /
• 2002

In a multicell box structure, distortional warping normal stress due to warping of cross section and transverse bending normal stress of walls due to distortion of cross section may consider as significant stresses unless distortion of box section is appropriately restricted. Nevertheless, during the past decades, no evaluation of distortional warping and transverse bending resistances for the multicell box section has been performed owing to geometric complexity and Insufficient information with respect to the distortion of multicell box section. The objective of present study is to evaluate the distortional warping and transverse bending resistances for the distortion of multicell box section and to validate the resistances through box girder analyses using multicell box beam element developed and conventional shell element. This developed box beam element has nine degrees of freedom per node including the effect of distortion.

• Steel and Composite Structures
• /
• 제15권3호
• /
• pp.247-266
• /
• 2013

This paper presents a comparison of results obtained by a newly developed numerical model for predicting the behaviour of structures under fire with experimental study carried out on heated and simply supported steel beam elements. A newly developed numerical model consists of three submodels: 3D beam model designed for calculating the inner forces in the structure, 2D model designed for calculation of stress and strain distribution over the cross section, including the section stiffness, and 3D transient nonlinear heat transfer model that is capable of calculating the temperature distribution along the structure, and the distribution over the cross section as well. Predictions of the calculated temperatures and vertical deflections obtained by the numerical model are compared with the results of the inhouse experiment in which steel beam element under load was heated for 90 minutes.

• 센서학회지
• /
• 제30권3호
• /
• pp.170-174
• /
• 2021

As the rising attention to the medical and healthcare issue, Bio-MEMS (Micro electro mechanical systems) platform such as bio sensor, cell culture system, and microfluidics device has been studied extensively. Bio-MEMS platform mostly has high resolution structure made by biocompatible material such as polydimethylsiloxane (PDMS). In addition, three dimension structure has been applied to the bio-MEMS. Lithography can be used to fabricate complex structure by multiple process, however, non-rectangular cross section can be implemented by introducing optical apparatus to lithography technic. X-ray lithography can be used even for sub-micron scale. Here in, we demonstrated lines with round shape cross section using the tilted gold absorber which was deposited on the oblique structure as the X-ray mask. This structure was used as a mold for PDMS. Molded PDMS was applied to the cell culture platform. Moreover, molded PDMS was bonded to flat PDMS to utilize to the sub-micro channel. This work has potential to the large area bio-MEMS.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권1호
• /
• pp.56-65
• /
• 2007

This paper describes physical meanings of various influences of cavity (or pillar) shape and filling factor of dielectric material on band structures in two-dimensional photonic crystals. Influences of circular and rectangular cross-sections of cavity (or pillar) arrays on photonic band structures are considered theoretically, and significant aspects of square and triangular lattices are compared. It is shown that both averaged dielectric constant of the photonic crystal and distribution profile of photon energy play important roles in designing optical properties. For the triangular lattice, especially, it is shown that cavity array with a rectangular cross-section breaks the band structure symmetry. So, we discuss this point from the band structure and address optical properties of lattice with a circular cross-section cavity.

• 한국강구조학회 논문집
• /
• 제16권1호통권68호
• /
• pp.81-89
• /
• 2004

구조물과 같은 아치의 진동해석은 많은 산업분야에서 다양하게 적용되기 때문에 공학적 문제에 중요한 주제이다. 특히 변화하는 단면형상을 가지는 아치는 질량이나 강도를 최적화 하거나 특별한 구조물이나 요구조건들을 만족하기 위해서 폭넓게 사용되어 진다. 최근에는 일반화 미분구적법(GDQM)이나 미분변환법(DTM)은 각각 Shu와 Zou에 의해서 제안이 되었다. 연구에서는 변화하는 단면형상을 가지는 아치의 진동해석이 일반화 미분구적법과 미분변환법을 적용하였다. 변화하는 단면형상을 가지는 아치에 대하여 지배방정식이 유도되어졌으며, 미분변환과 일반화 미분구적법의 개념이 간단히 소개되었다. 변화하는 단면형상을 가지는 아치의 무차원화된 고유진동수가 다양한 경계조건에 대해서 구해졌으며, 이러한 방법들에 의해서 얻어지는 결과들은 선행연구와 비교 되어졌다. 일반화 미분구적법과 미분변환법은 변화하는 단면형상을 가지는 아치의 진동문제를 해석함에 있어서 빠른 수렴, 정확도, 효율성, 유효성을 보인다.

• Wind and Structures
• /
• 제1권1호
• /
• pp.59-66
• /
• 1998

The vibrations of bodies subjected to fluid flow can cause modifications in the flow conditions, giving rise to interaction forces that depend primarily on displacements and velocities of the body in question. In this paper the linearized equations of motion for bodies of arbitrary prismatic or cylindrical cross-section in two-dimensional cross-flow are presented, considering the three degrees of freedom of the body cross-section. By restraining the rotational motion, equations applicable to circular tubes, pipes or cables are obtained. These equations can be used to determine stability limits for such structural systems when subjected to non uniform cross-flow, or to evaluate, under the quasi static assumption, their response to vortex or turbulent excitation. As a simple illustration, the stability of a pipe subjected to a bidimensional flow in the direction normal to the pipe axis is examined. It is shown that the approach is extremely powerful, allowing the evaluation of fluid-structure interaction in unidimensional structural systems, such as straight or curved pipes, cables, etc, by means of either a combined experimental-numerical scheme or through purely numerical methods.

• 대한전자공학회논문지
• /
• 제26권12호
• /
• pp.1918-1925
• /
• 1989

A method for computing the capacitance and inductance matrix for 2-D multiconductor transmission lines with arbitrary cross section in dielectric medium is presented. The integral equation is obtained by using a free space Green function in conjunction with free and bound charges existing on boundary surfaces. The numerical analysis is based on the moment method using point matching and Galerkin method. And kthe scheme to reduce memory and computation time is presented for symmetric structure.

• Restorative Dentistry and Endodontics
• /
• 제28권6호
• /
• pp.485-490
• /
• 2003

Complete understanding of the exterior and interior structure of the tooth would be prerequisite to the successful clinical results, especially in the restorative and endodontic treatment. Although three-dimensional reconstruction method using x-ray microtomography could not be used in clinical cases, it may be the best way to reconstruct the morphologic characteristics of the tooth structure in detail without destructing the tooth itself. This study was done to three dimensionally reconstruct every teeth in the arch in order to increase the understanding about the endodontic treatment and to promote the effective restorative treatment by upgrading the knowledge of the tooth morphology. After placing tooth between the microfocus x-ray tube and the image intensifier to obtain two-dimensional images of each level. scanning was done under the condition of 80 keV, $100{\;}\mu\textrm{m}$, 16.8 magnification with the spot size of $8{\;}\mu\textrm{m}$. Cross-section pixel size of $16.28{\;}\mu\textrm{m}$ and 48.83 cross-section to cross-section distance were also used. From the results of this study, precise three dimensional reconstructed images of every teeth could be obtained. Furthermore, it was possible to see image that showed interested area only, for example. enamel portion only, pulp and dentin area without enamel structure, pulp only, combination image of enamel and pulp, etc. It was also possible to see transparent image without some part of tooth structure. This image might be used as a guide when restoring and preparing the full and partial crown by showing the positional and morphological relationship between the pulp and the outer tooth structure. Another profit may be related with the fact that it would promote the understanding of the interior structure by making observation of the auto-rotating image of AVI file from the various direction possible.

• Fibers and Polymers
• /
• 제4권4호
• /
• pp.199-203
• /
• 2003

In order to investigate the effects of cross-sectional shapes on the sound characteristics of polyester fibers, 10 specimens were woven into a twill structure made of round, hollow, triangular, u-shape, cruciform, and composite cross-sectional (▲/▲ ,()/▲, Y/Y) fibers. Their rustling sounds were recorded, and their sound spectra were obtained from FFT analysis. Physical sound parameters (LPT, ΔL, Δf) and Zwicker's psychoacoustic parameters of the loudness(Z), sharpness(Z), roughness(Z), and fluctuation strength(Z) were calculated from the sound spectra. According to noncircular cross-section fibers, the hollow shaped fiber had the highest value of LPT, ΔL, loudness(Z), and fluctuation strength(Z). The triangular shaped fiber had a lower value of LPT, ΔL, loudness(Z), and roughness(Z) than those of the round shaped fiber. Among composite cross-section fibers, C1(▲/▲) and C3 (Y/Y) had higher values of LPT, ΔL, Δf and loudness(Z) but C2(()/▲) had lower values. Also the LPT, ΔL, sharpness(Z), and roughness(Z) values of different denier were similar to each other, but the Δf and loudness(Z) values increased as the denier increased.

• Nuclear Engineering and Technology
• /
• 제46권3호
• /
• pp.281-290
• /
• 2014

In order to properly quantify fission reactor neutronics parameter uncertainties, we have to use covariance data and sensitivity profiles consistently. In the present paper, we establish two consistent methodologies for uncertainty quantification: a self-shielded cross section-based consistent methodology and an infinitely-diluted cross section-based consistent methodology. With these methodologies and the covariance data of uranium-238 nuclear data given in JENDL-3.3, we quantify uncertainties of infinite neutron multiplication factors of light water reactor and fast reactor fuel cells. While an inconsistent methodology gives results which depend on the energy group structure of neutron flux and neutron-nuclide reaction cross section representation, both the consistent methodologies give fair results with no such dependences.