• Applied Microscopy
• /
• v.45 no.4
• /
• pp.189-194
• /
• 2015

Backside Ar ion milling technique for the preparation of cross-sectional transmission electron microscopy (TEM) specimens, and backside-ion milling combined with focused ion beam (FIB) operation for electron holography were introduced in this paper. The backside Ar ion milling technique offers advantages in preparing cross-sectional specimens having thin, smooth and uniform surfaces with low surface damages. The back-side ion milling combined with the FIB technique could be used to observe the two-dimensional p-n junction profiles in semiconductors with the sample quality sufficient for an electron holography study. These techniques have useful applications for accurate TEM analysis of the microstructure of materials or electronic devices such as arrayed hole patterns, three-dimensional integrated circuits, and also relatively thick layers (> $1{\mu}m$).

• Journal of the Korea Furniture Society
• /
• v.18 no.2
• /
• pp.138-142
• /
• 2007

Optical microscope was used to observe the difference of safranine penetration in Pinus densiflora, Pinus rigida, Pinus koraiensis and Larix kaempferi grown in Korea. It was found that Pinus koraiensis contained the highest number of ray parenchyma and ray tracheids. In longitudinal direction, latewood penetration was found higher than that of earlywood. The number of resin canals was found highest in Pinus koraiensis and lowest in Pinus rigida. The resin canal conducted safranine higher than longitudinal tracheids. In longitudinal direction, safranine diffused from longitudinal tracheid to ray parenchyma through the cross-field pits and from the longitudinal resin canal to ray parenchyma or longitudinal tracheid. Safranine diffused from longitudinal tracheid to its neighboring tracheid through bordered pit or ray parenchyma through the cross-field pits.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.1
• /
• pp.188-197
• /
• 2012

DEA 모델중 널리 사용되는 교차평가모델(cross efficiency model)은 가중치에 제한을 두지 않고 어떤 특정분야에 탁월한 성과를 내는 DMU(Decision Making Unit)보다는 보다 전반적인 분야에서 두각을 나타내는 DMU를 선발함으로써 많은 연구자들이 DEA문헌에서 적용하여 왔다. 본 연구에서는 이러한 교차평가모델이 실제에 있어서는 암묵적으로 고정 가중치를 사용한다는 것과 동일한 결과를 나타낸다는 것을 분석적으로 밝혔다(one input, multi output case). 또한 multi-input, multi-output case의 경우에도 overall performer의 cluster에 근접한 대다수 DMU의 경우에는 고정 가중치를 사용한 경우와 거의 차이가 없음을 보였다. 교차평가 모델에 적용된 변수의 가중치를 보다 명확히 함으로써 연구자들이 모델의 평가결과를 이해하는데 도움이 될 수 있을 것이다. 또한 교차 평가의 가중치 도식을 더 명확히 보여주기 위해 biplot을 제안한다.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.171-174
• /
• 2003

The Special orthotropic plate theory is used for analysis of panels made of steel girders and cross-beams, and made of reinforced concrete. The cross-sections of girders and cross-beams are WF types. The result is compared with that of the beam theory. According to the numerical examination given in this paper, the result by the plate theory is 2.43 times stiffer than that of beam theory, The result for the concrete slab in given for the practicing engineers.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.113-116
• /
• 1999

신호 대 잡음비가 낮은 환경에서 센서 어레이에 입사된 입력 신호 사이의 지연시간 추정(Time Delay Estimation, 이하 TDE)은 높은 분해능이 요구된다. 본 연구에서는 높은 분해능의 TDE를 구하기 위해 상호상관함수(Cross-Correlation)에 평균 차 함수(Average Magnitude Difference function, AMDF)의 역수를 가중한 MCC (Modified Cross-Correlation)알고리즘을 제안한다. 모의신호를 사용한 수치 시뮬레이션 실험으로 종래의 AMDF, Cross-Correlation 알고리즘과 본 연구에서 제안한 MCC 알고리즘의 분해능을 비교 분석하였다 각 알고리즘의 TDE 결과에 대해 STFT(Short Time fourier Transform)에 의한 시간 주파수 해석을 한 결과 MCC알고리즘을 사용하여 TDE 분해능이 향상되었음을 보고한다.

• Korean Journal of Child Studies
• /
• v.37 no.6
• /
• pp.5-17
• /
• 2016

Objective: This study focused on the longitudinal associations between self-esteem and peer relationships in Korean adolescents while considering gender and timing-early and late adolescence-differences. Methods: The study made use of data from the Korean Children and Youth Panel Survey. Three waves of data collected from 2,351 adolescents were analyzed by means of autoregressive cross-lagged modeling. Results: The results indicated that self-esteem predicted subsequent changes in peer relationship but not vice versa. Further, the results that longitudinal associations between self-esteem and peer relationships differed between male and female adolescents and between early and late adolescence. Conclusion: The findings revaluated the longitudinal relationship between self-esteem and peer relationships. Both gender and timing should be considered when planning interventions related issues about self-esteem and peer relationships in adolescence.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.9 s.180
• /
• pp.2191-2201
• /
• 2000

End effects due to sectional deformations of thin-walled beams with closed cross section are analysed by a one-dimensional theory. In particular, end effects associated with warping (out of plane m otion) and distortion (in plane motion) are investigated. The exact solutions as a vector form are newly derived to reveal slowly-decaying nature of the end effects in a thin-walled beam loaded by a couple. Several examples of thin-walled beams under various loading conditions indicate that the local end effect zone due to warping and distortion is approximately ten times the typical beam width.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.176.1-176.1
• /
• 2014

Graphene has attracted an increasing attention due to its extraordinary electronic, mechanical, and thermal properties. Especially, the two dimensional (2D) sheet of graphene with an extremely high surface to volume ratio has a great potential in the preparation of multifunctional nanomaterials, as 2D supports to host metal nanoparticles (NPs). Copper oxide is widely used in various areas as antifouling paint, p-type semiconductor, dry cell batteries, and catalysts. Although the copper oxide(II) has been well known for efficient catalyst in C-N cross-coupling reaction, copper oxide(I) has not been highlighted. In this research, CuO and Cu2O nanoparticles (NPs) dispersed on the surface of grapehene oxide (GO) have been synthesized by impregnation method and their morphological and electronic structures have been systemically investigated using TEM, XRD, and XAFS. We demonstrate that both CuO and Cu2O on graphene presents efficient catalytic performance toward C-N cross coupling reaction. The detailed structural difference between CuO and Cu2O NPs and their effect on catalytic performance are discussed.

• Transactions on Electrical and Electronic Materials
• /
• v.10 no.1
• /
• pp.9-15
• /
• 2009

There is a growing demand for a high voltage silicone rubber composite with high mechanical property and high electrical property. The effect of modified cross-linking agent on the mechanical, electrical properties, and short-circuit test performance of silicone rubber insulators have been investigated. To use base polymer, the various silicone polymers were prepared by the equilibrium polymerization. Aluminum trihydrate surface was treated by vinyl silane. Liquid silicone rubber nanocomposite was prepared from the compounding of VPMPS, HPDMS, catalyst, and alumina trihydrate modified with 1,3,5-trivinyl-l,3,5-trimethylcyclotrisiloxane. The mechanical property and electrical property for insulation materials were measured, indicating the high tensile strength and the good short-circuit property.

• Journal of the Chungcheong Mathematical Society
• /
• v.27 no.4
• /
• pp.675-688
• /
• 2014

In this paper, we present an efficient way to determine a suitable value of the regularization parameter using the global generalized cross validation and analyze the experimental results from preconditioned global conjugate gradient linear least squares(Gl-CGLS) method in solving image deblurring problems. Preconditioned Gl-CGLS solves general linear systems with multiple right-hand sides. It has been shown in [10] that this method can be effectively applied to image deblurring problems. The regularization parameter, chosen from the global generalized cross validation, with preconditioned Gl-CGLS method can give better reconstructions of the true image than other parameters considered in this study.