• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.155-158
• /
• 1999

In the high speed range for Vector control of Synchronous Reluctance Motor, the effect of iron loss and the cross-coupling of dq axis currents is dependent on the increase of the operating frequency can not be negligible. In this paper, we propose a decupling Vector control of dq axis current that the effect of iron loss is eliminated, and confirm that through simulation results.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2087-2092
• /
• 2005

Using disturbance observer (DOB) is effective in enhancing the performance of dynamic system in the presence of disturbances. Recently the definition of disturbance has been expanded to modeling uncertainty including parameter variation, internal disturbance. Various structures of DOB have been proposed to improve sensitivity of system for better disturbance rejection performance. However in the case of improvement of sensitivity function, it tends to bring poor transient response due to cross-coupling and phase lag. Furthermore it could be very sensitive to measurement noise due to increased peak of complementary sensitivity function. In this paper, a dual disturbance observer (Dual-DOB) is proposed to reduce the effect of such cross-coupling. It is possible for us to improve the sensitivity function with additional external DOB with hardly affecting complementary sensitivity function. Thus it is able to have robustness against measurement noise. Since we are able to design DOBs of internal and external loop independently, we could prevent transient response quality from degrading while improving the sensitivity function. The proposed Dual-DOB is applied to a commercial optical disk drive tracking servo system. The experimental result shows that the Dual-DOB is an effective method in rejecting the disturbance as well as improving the tracking performance.

• Proceedings of the KIPE Conference
• /
• 2008.10a
• /
• pp.124-126
• /
• 2008

Grid Connected inverter is produced current to deliver power to grid. To provide low THD current, LCL filters is effective to filter high frequency component of current output from inverter. To provide sinusoidal waveform, there are many researchers have been proposed several controllers for grid-connected inverter controllers. Synchronous Reference Frame (SRF)-based controller is the most popular methods. SRF-based controller is capable for reducing both of zero-steady state error and phase delay. But SRF based controller is contained cross-coupling components, which generate some difficulties to analyze. In this paper, SRF based controller is analyzed. By applying decoupling control, cross-coupling component is eliminated and single phase model of the system is obtained. Through this single phase model, gain controller is designed. To reduce steady state error, proportional gain is set as high as possible, but it may produce instability. To compromise between a minimum steady state error and stability, the single phase model is evaluate through Root Locus and Bode diagram. PSIM simulation is used to verify the analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1300-1303
• /
• 1996

In this paper a typical problem is examined that a light, general aviation airplane, such as Cessna or Navion, in gliding turn flight shows helical-dive phenomenon when pilots try to stop the descent by using elevator only. It is known from pilot's experience that in a certain flight trim it is impossible to recover from helical-dive by using elevator only. From this study it is shown that helical-dive phenomenon is involved with longitudinal/lateral dynamics coupling to airplane's aerodynamics. Also this phenomenon consists of three parts of flight dynamics; first of all, fast longitudinal motion occurs, then is followed by a little slow lateral motion, and finally logitudinal/lateral coupled motion is fully developed.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.1076-1079
• /
• 1993

A fuzzy digital controller is combined an autopilot system for compensating the cross coupling effect of the induced roll due to the dynamic characteristic of three fin torpedo. However the utilization of fuzzy chip has many interfacing problems with typical microprocessors of the guidance and control unit. Since a fuzzy digital controller on a microprocessor uses a finite word length A/D converters arul D/A converters, ADC and DAC may generate nonlinear effects such as deadband and limit cycle phenomena. In this paper, the robustness of fuzzy digital controller is tested with ADC a finite word length.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.9
• /
• pp.1011-1017
• /
• 2011

Servo control loops are a core part in the control architecture of machine tools. Servo control loops manage acceleration, velocity and position of all the axes in a machine tool based on commands. The performance of servo control loops sets the basis for quality of production paris and cycle time reduction. First, this paper presents a general control architecture of machine tools and several control schemes in literature, which can be applicable to machine tools control; including Zero Phase Error Tracking Control (ZPETC) and Cross Coupling Control (CCC). After that, modem control strategies to mitigate the problem of high speed machining are reviewed. In high speed machining, high accelerations excite the machine structure up to high frequencies, thereby exciting the structure's modes of vibration. These structural vibrations need to be damped if accurate positioning or trajectory following is required. Input shaping is an attractive option in dealing with structural vibrations. The advantages and drawbacks of using input shaping technique for machine tools are discussed in detail.

• Journal of Astronomy and Space Sciences
• /
• v.19 no.2
• /
• pp.107-122
• /
• 2002

Multi-body spacecraft attitude and configuration control formulations based on the use of collaborative control theory are considered. The control formulations are based on two-player, nonzero-sum, differential game theory applied using a Nash strategy. It is desired that the control laws allow different components of the multi-body system to perform different tasks. For example, it may be desired that one body points toward a fixed star while another body in the system slews to track another satellite. Although similar to the linear quadratic regulator formulation, the collaborative control formulation contains a number of additional design parameters because the problem is formulated as two control problems coupled together. The use of the freedom of the partitioning of the total problem into two coupled control problems and the selection of the elements of the cross-coupling matrices are specific problems ad-dressed in this paper. Examples are used to show that significant improvement in performance, as measured by realistic criteria, of collaborative control over conventional linear quadratic regulator control can be achieved by using proposed design guidelines.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.2
• /
• pp.349-356
• /
• 2018

In this study, the synchronous control system is designed to restrain the speed difference generated between two propellers, namely, synchronous error in a dual electric propulsion system of unmanned surface vehicle, fish finder boat, etc. The control system based on coupling structure is composed of pre-filters and speed controllers for each propulsion system and a synchronous controller cross-coupled between two propulsion systems. The pre-filter and speed controller are designed in order that the propulsion system may follow the speed reference without overshoot and input saturation. And the synchronous controller is designed in consideration of damping and quickness of the synchronous controller system after analyzing effect of the skew disturbance and mismatched dynamic characteristics on synchronous error. Finally, the simulation results show that the designed control system is effective for elimination of synchronous error.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.355-360
• /
• 1991

A method of autopilot gain-scheduling is presented for missiles which have heavy aerodynamic coupling between pitch and yaw channels due to high maneuverability. Pitch and yaw, autopilot are cross-coupled, and their feedback gains are scheduled by total acceleration and bank angle for given Mach number and height. Bank angle information is obtained by using a simple estimator. By computer simulation, it is shown that the proposed method is superior to other existing methods.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.412-417
• /
• 1992

In this paper, we present a method to design a coupled autopilot for STT missiles which have severe aerodynamic cross-coupling. The aerodynamic model is derived in the meneuver plane and, based on that model, an autopilot scheduled by the normal acceleration and the estimated bank angle is designed. Bank angle is obtained by a simple estimator. With the proposed autopilot, it is shown by computer simulations that induced moments are properly compensated and the performance is supiorior to the conventional autopilot.