• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.357-358
• /
• 2013

The non-linear characteristics of ON states are important for the application to the high density cross-point memory industry because the sneak current in neighbor cells occurred during reading, erasing, and writing process. Kw of above 20 in ON states, which is the writing current @ Vwrite/the current @ 1/2Vwrite, was required in cross-point ReRAM memory industry. The high current density non-linear IV curve of ZnSe selector was shown and the ALD HfO2 switching device has the linear properties of ON states and the compliance current of 100 uA. To evaluate the performance of the selection device, we connected itto HfO2 switching device in series. The bottom electrode of the selection device was connected to the top electrode of the RRAM. All of the bias was applied with respect to the top electrode of the selection device, whereas the bottom electrode of the RRAM was grounded. In the cross-point application, 1/2Vwrite and -1/2Vwrite were applied to the word-line and bit-line, respectively, which were connected to the selected cell, and a zero bias was applied to the unselected word-lines and bit-lines. The current @ 1/2Vwrite of the unselected cells was blocked by the selection device, thus eliminating the sneak path and obtaining a writing voltage margin. Using this method, the writing voltage margin was analyzed on the basis of the memory size.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.7
• /
• pp.448-457
• /
• 2010

Vibrations and wave propagations in waveguide structures can be analysed efficiently by using waveguide finite element (WFE) method. The WFE method only models the 2-dimensional cross-section of the waveguide with finite elements so that the size of the model and computing time are much less than those of the 3-dimensional FE models. For cylindrical shells or pipes which have simple cross-sections, the external coupling with fluids can be treated theoretically. For waveguides of complex cross-sectional geometries, however, numerical methods are required to deal with external fluids. In this numerical approach, the external fluid is modelled by the boundary elements (BEs) and connected to WFEs. In order to validate this WFE/BE method, a pipe submerged in water is considered in this study. The dispersion diagrams and point mobilities of the pipe simulated are compared to those that theoretically obtained. Also the acoustic powers radiated from the pipe are predicted and compared in both cases of air and water as an external medium.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.3
• /
• pp.62-68
• /
• 2000

In order to automate straightening process of deflected beams an adaptive three-point bending controller is studies which estimates and controls springback of beams under three-point bending. An analytical load-deflection model for three-point bending of beams with circular cross sections is derived nondimensionally. In spite of variation of material and process parameters this model can be applied to springback estimation by measuring real-time values of reactive load and deflection of the beam. A hydraulic punch stroke controller is designed to take real-time controls of the permanent deflection of the beam. The validity of the proposed system is verified through experiments.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1A
• /
• pp.125-133
• /
• 2008

According to longer and longer span, dynamic instability of stay cable should be prevented. Dynamic instability occurs mainly symmetric 1st mode and antisymmetric 1st mode in stay cable. Especially symmetric 1st mode has a lot of influence on sag. Therefore fundamental frequency of stay cable is different from that of taut sting. Irvine, Triantafyllou, Ahn etc. analyzed dynamic behavior of taut cable with sag through analytical technical and their researches give important results for large bounds of Irvine parameter. But each research shows mutually different values out of characteristic (cross-over or mode-coupled) point and each solution of frequency equations of all researchers can be very difficultly found because of their very high non-linearity. Presented study focuses on fundamental frequency of stay cable. Generalized mechanical energy with symmetric 1st mode vibration shape satisfied boundary conditions is evolved by Rayleigh-Ritz method. It is possible to give linear analytic solution within characteristic point. Error by this approach shows only below 3% at characteristic point against existing researches. And taut cable don't exceed characteristic point. I.e. high accuracy, easy solving techniques, and a little bit limitations. Therefore presented study can be announced that it is good study ergonomically.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.24 no.1
• /
• pp.165-170
• /
• 2010

This study assessed effects of magnetic acu-point therapy as an add-on to conventional antihypertensive managements such as medication or lifestyle modification for hypertensive or pre-hypertensive subjects. This study was conducted with the purpose to evaluate the decreasing effect of the blood pressure on the hypertensive patients who were given to magnetic acu-point therapy. A single-blind, placebo-controlled trial by cross matching was conducted at Daejeon University Oriental Hospital. The washout periods of cross matching are 10 days. 22 hypertensive (systolic BP>140 mmHg or diastolic BP>90 mmHg) volunteers were recruited and treatments were donemagnetic acu-points on Oegwan(TE 5), Jogimeup(GB 41), Naegwan(PC 6), Gongson(SP 4), Hugye(SI 3), Sinmaek(BL 62). The treated group was statistically significant decrease of the blood pressure, while control group show no statistically significant difference of BP. From the results, magnetic acu-point therapy seems to offer a benefit to the treatment of hypertensive patients.

• Journal of Fashion Business
• /
• v.15 no.5
• /
• pp.178-194
• /
• 2011

Due to the population growth of the old aged, Korea is also entering into an aging society. But a research on the pattern design to the old aged is much to be desired. The purpose of this research is to design skirt pattern fitted for each body type by categorizing the lower body type of the old aged woman. For the way of research, categorized the body type by using the female measuring size from the 65 years old to 99 years old which has been measured by the Korean body size research as an assay data, and base on this data, a suitable skirt pattern for each body type of the old aged woman was designed by practicing the exterior evaluation. The data analysis was done with the statistical treatment in SPSS 12.0, and the results are as follows. The lower body type of the old aged woman were divided into the type 1. The circumference article is the biggest compared to the height article regarding to the lower body type of the old aged woman. The type 2. The height article and the circumference and thickness articles are the poorest. The type 3. The height article is the biggest and the hip width and calf circumference are thicker than the waist width. The type 4. The height article is the lowest and the waist width is thicker instead the hip and leg are thinner. In type 1, The pattern was modified by increasing 1cm a length of the dart and raising up 1.2cm at the cross point between side line and waist line. In type 2, the basic pattern was used, and in type 3, using the outline of the basic pattern however, increased 1cm a length of the dart and modified the amounts of dart by handling the art in curve, and modified the waist line to be more three-dimensional curves by raising up 1 cm at the cross point between waist line and side line and falling down 0.5cm at the cross point between the back center line and the waist line. In type 4, modified the amounts of front and back dart to 1.25cm, and raised up 0.8cm at the cross point between side line and waist line, and modified the waist line and the side seam line in a gentle curve by reducing circumference of the skirt tail to 1cm from the side seam line.

• Journal of Energy Engineering
• /
• v.26 no.3
• /
• pp.78-89
• /
• 2017

Spontaneous combustion propensity of various coals of carbonization grade as a pulverized fuel of coal fired power plant has been tested from an initial temperature of $25^{\circ}C$ to $600^{\circ}C$ by heated in an oven with air to analyze an self oxidation starting temperature. This tests produce a CPT(Cross Point Temperature), IT(Ignition temperature) and CPS(Cross Point Slope) by calculated as the slope of time taken a rapid exothermic oxidation reaction at CPT base. CPS show a carbonization rank dependence, whereby wood pellet has the highest propensity to spontaneous combustion of $20.995^{\circ}C/min$. A subbituminous KIDECO coal shows an CPS values of $15.370^{\circ}C/min$ whereas it of pet coke of the highest carbonization rank has $20.950^{\circ}C/min$. The nature of this trend is most likely a concentration of volatile matter and oxygen functional groups of coal surface that governs the available component for oxidation as well as surface area of fuel char, and constant pressure molar heat.

• Cross-Cultural Studies
• /
• v.19
• /
• pp.149-179
• /
• 2010

This article is concerned about the symbolic meaning of the transvestism Renaissance perspective through analysis of Triumph Over Persecution work and The Merchant of Venice, and Jealous Ioan Tornese. The transvestism is frequently present in the comedies of the golden age. A woman author Maria de Zayas has a special interest in female identity with critical and defying view. Also the subject of the transvestism in Spanish literature originated in Italian tradition. In Italian literature, there were two types of disguised women, who urge for love and warrior-heroine(amazon). Both types are also listed in Spanish literature. The dress-crossing heroine of Triumph Over Persecution displays a type of heroine, who corrects a male prejudice and reset a harmonious order. Shakespeare is also one of the Renaissance writers under the influence of the Italian Renaissance novel. Heroine of Merchant of Venice symbolizes a triumphant challenge against the blocks of the patriarchal system. In spite of the social system blocks, cross-dressing women may receive in the patriarchal scenes without problems. Based on the notion of paradox and irony, the Italian novel reflects popular psychology of the time when the link between the internal identity and social outside puts into question. The cross-dressing Torneses' wife, symbolizes the mockery or renaissance deception. Their deception emphasis on an ironic way in the point view of inhuman man who consider women material belongs to the man without any free-will. The costume of the characters make it possible to change their original identity into the other. From this point of view, we can say that the transvestism in these works could be interpreted in two ways: first, the destruction of the traditional categories of women's identity and second, the burlesque contempt on the patriarchal renaissance society.

• Proceedings of the Korean Statistical Society Conference
• /
• 2002.05a
• /
• pp.1-5
• /
• 2002

We consider the problem of optimal bandwidth choice for nonparametric classification, based on kernel density estimators, where the problem of interest is distinguishing between two univariate distributions. When the densities intersect at a single point, optimal bandwidth choice depends on curvatures of the densities at that point. The problem of empirical bandwidth selection and classifying data in the tails of a distribution are also addressed.

• Proceedings of the Korean Printing Society Conference
• /
• 2002.05a
• /
• pp.10-18
• /
• 2002

On the process of cross-media color reproduction, a key feature is the use of gamut mapping techniques to adjust the different color gamuts between displays and printers. Even though a number of GMAs have been published, but there are no method satisfactory enough for more exect color reproduction. In this paper, the gamut mapping methods of nearest point clipping(NPC), centroid clipping (SLIN), straight clipping and cusp clipping(CUSP) were tested and analyzed with color difference, and a new gamut mapping algorithm based on variable anchor point method was proposed.