• Journal of the East Asian Society of Dietary Life
• /
• v.13 no.1
• /
• pp.25-38
• /
• 2003

This study was conducted to establish the microbiological quality standards applying the HACCP system on sushi items of Japanese restaurant in Korea. The study evaluated hygienic conditions of kitchen and workers, pH time-temperature relationship, and microbial assessments during whole process of sushi making in 2001. Overall hygienic conditions were normal for both kitchen and for workers by 3 point scale, but hygienic controls against the cross-contamination were still needed. Each process of sushi making was performed under the risk of microbial contamination, since pH value of most of ingredients was over pH 4.6 and also production time(3.5~6 hrs) were long enough to cause problems. Microorganisms were high enough to cause foodborne illness ranged 8.0$\times$10$^2$~3.3$\times$10$^{6}$ CFU/g of TPC and 1.0$\times$10$^1$~1.6$\times$10$^3$CFU/g of coliforms, although TPC, coliforms and Staphylcoccus aureus were within the standard limits (TPC 10$^2$~10$^{6}$ CFU/g, coliforms 10$^3$CFU/g). However, Salmonella and Vibrio parahaemolyticus were not detected. High populations TPC and coliforms were also found in the cooks' hands and cooking utensils(TPC 10$^2$~10$^{6}$ CFU/100cm$^2$and Coliforms 10$^1$~10$^3$CFU/100cm$^2$). Based on the CCP decision tree analysis, the CCPs were the holding steps far six sushi production line except the tuna and the thawing step for tuna sushi. In conclusion, overall state of sushi production was fairly good but much improvement was still needed.

• Economic and Environmental Geology
• /
• v.41 no.6
• /
• pp.645-655
• /
• 2008

The Cr(VI) concentrations at the shallow aquifer well (MPH-0-1) of the Moonpyung groundwater monitoring station were in the range of 0.5 to 3.1 mg/L exceeding 10 to 62 times the guideline for drinking-water quality, indicating continuous contamination. However, Cr was not detected at the deep bedrock well and the other subsidiary monitoring wells except for MPH-1 and 6. Cross-correlation analyses were conducted for rainfall and groundwater level time series, resulting in the mean time of recharge after precipitation events to be 5.6 days. For rainy season, the water level was raised and the Cr(VI) concentration was several times lower than that during dry season at well MPH-0-1 well. Correlation of the Cr(VI) concentration with the groundwater-level showed that the Cr(VI) reduction was closely related with the groundwater-level rise in the well. However, the groundwater level rise during high water season induced the lateral migration of the Cr(VI)-contaminated groundwater at well MPH-4. We enriched and isolated a chromium reducing bacteria, Enterobacter aerogenes, from the Cr(VI)-contaminated groundwater in the wells MPH-0-1 and MPH-1. The bacteria may play an important role for immobilizing Cr(VI) in the Cr(VI)-contaminated groundwater. Therefore, the migration of the contaminant (Cr(VI) must has been restricted because of the natural attenuation by microbial reduction of Cr(VI) in the groundwater. This research suggests that the bioremediation of the Cr(VI)-contaminated groundwater by the indigenous bacteria may be feasible in the Cr(VI) contaminated groundwater.

• Journal of Food Hygiene and Safety
• /
• v.31 no.4
• /
• pp.258-263
• /
• 2016

The risks of sanitary indicative bacteria, heavy metals and chlorinated derivatives in 94 cases of sanitary wet towels used in food services (39 from sanitary wet towel treatment business, 55 from food services) were assessed in the present study. Lead was detected in the range of N.D.~0.41 mg/kg (75 cases were not detected), N.D.~0.25 mg/kg of arsenic (93 cases were not detected), N.D.~0.01 mg/kg of cadmium (7 cases were lower than limit of quantitation; 87 cases were not detected), 0.003 mg/kg ~ 0.09 mg/kg of mercury. And chromium (VI) was not detected from all samples. The level of lead was the highest among the tested heavy metals, and the highest concentration of lead was 0.41 mg/kg. However, it was only 2.1% of legal limit (less than 20 mg/kg). The average moisture content of the samples was 61.9% (50.0% ~ 77.0%) and it showed no relevance to the detection of bacterial counts. Escherichia coli was not detected. Bacterial counts were detected 43 cases and among them, 24 cases were exceeded the legal limit. It was verified that the packaging conditions of sanitary wet towel (whether it is packed by a piece or not and sealed or not) are critical factors to cause the germ contamination and cross contamination in the wet towels. The chlorinated derivatives (chlorites and chlorates) were detected in 17 (19.3%) out of 88 cases. The results would be used as preliminary information to establish the programs of "Safety education for manufacturers and public policy of safety".

• Journal of dental hygiene science
• /
• v.8 no.4
• /
• pp.275-281
• /
• 2008

Background: This research aims to provide basic data for dental hygienists to implement the infection control after understanding the level of their implementation of infection control in case they have been trained of infection control or not. Method: The respondents in this research are the dental hygienists who worked in the Incheon or Gyeonggi areas between June 16 and July 5, 2008 and who attended complementary training conducted by the Seoul Branch of Korean Dental Hygienists Association in April 2008. A total of 191 questionnaires were distributed to them, and the frequency of the collected data was analyzed using SPSS WIN 12.0. Moreover, cross-tabulation analysis (${\chi}^2$) whose significance level was 0.05, was applied to the data in order to verify the statistical significance of the survey method. Result: There was significant difference in their practice to wear gloves and/or a mask, use a disposable apron and the time to change the apron depending upon the respondents' workplace. There was significant difference in the time to change their apron depending upon the respondents' time of service. 91.6% had been trained in the infection control: of them, 70.7% trained at their school. It was found that 68.6% of the respondents who had been trained in the infection control would wash their hands before treating a patient. 50.3% of the respondents who had been trained in the prevention of contamination would wear their gloves as needed for a basic treatment. Conclusion: Considering the above results of this research, it is concluded that it is necessary to provide practicing dental hygienists with many opportunities for systematic and practical training so that they may faithfully follow the guidelines for the prevention of contamination and to encourage hospitals to have a greater store of relevant facilities, equipment and supplies.

• Journal of Food Hygiene and Safety
• /
• v.27 no.4
• /
• pp.420-426
• /
• 2012

The purpose of this study was to identify control points through microbiological hazard analysis in the manufacturing processes of starch noodles. Samples were collected from the ingredients, manufacturing processes, equipment and environment. Microbiological hazard assessments were performed using aerobic plate counts (APC), Enterobacteriaceae (EB), E. coli and five pathogens including B. cereus, E. coli O157:H7, L. monocytogenes, Salmonella spp., and S. aureus. The APC levels in raw materials were from 2.12 to 3.83 log CFU/g. The contamination levels after kneading were 4.31 log CFU/g for APCs and 2.88 log CFU/g for EB counts. APCs decreased to 1.63 log CFU/g and EB were not detected after gelatinization, but their levels slightly increased upon cooling, cutting, ripening, freezing, thawing, and separating. The reuse of cooling and coating water would be a critical source of microbial increase after cooling. After drying, APCs and EB counts decreased to 5.05 log CFU/g and 2.74 log CFU/g, respectively, and the levels were maintained to final products. These results suggest that the cooling process is a critical control point for microbiological safety, and the cooling water should be treated and controlled to prevent cross contamination by pre-requisite program.

• Journal of Food Hygiene and Safety
• /
• v.27 no.4
• /
• pp.432-441
• /
• 2012

In this study, the transfer rate of wild type Listeria mon, ytogenes (LM) was investigated to establish the standard of safety management during pork meat pr, essing for meat to meat and meat to food contact surfaces contamination at 5 and $10^{\circ}C$. The transfer rate of LM from meat to meat during the pr, essing increased from 0.02% after 30 min to 0.42% after 120 min at $5^{\circ}C$, while for conveyor belt and stainless steel, it decreased from 0.015% and 0.013% after 30 min to 0.002% and 0.0003% after 120 min at $5^{\circ}C$, respectively (p < 0.05). When temperature increased to $10^{\circ}C$, the transfer rates of LM from meat to meat, conveyor belt and stainless steel were the highest at 60 min exposure, and all decreased after 120 min. In reverse, the transfer rate from food contact surface to pork meat was significantly higher than that from pork meat to food contact surface (p < 0.01). Also, the transfer rate to conveyor belt was significantly higher than stainless steel (p < 0.05) and it was highest at 30 min exposure time in both 5 and $10^{\circ}C$. This study indicates that the transfer and adherence rates of LM are influenced by the contact time and temperature. Consequently, these results were utilized to develop a predictive model with a high level of confidence which can lead to prevent cross-contamination during pork meat processing.

• Journal of agriculture & life science
• /
• v.44 no.6
• /
• pp.121-132
• /
• 2010

Soybean farms in Changnyeong were selected for hazard analysis to establish the Good Agricultural Practices (GAP) model of soybean, and physical, chemical(heavy metal) and biological(sanitary indications, foodborne pathogens) hazard analysis for cultivation environment (soil, water) was carried out. First, bow which is able to be mixed in soil and water was confirmed as physical hazard. Levels (Cd:0.01~0.103, Cu:0.001~6.036, As:0.006~3.045, Hg:ND~0.041, Pb:0.003~3.952, $Cr^{+6}$:0.007~0.496, Zn:0.001~66.500, Ni:0.003~18.010) of heavy metals in soil and water were appropriate for GAP criteria. In biological hazard, APC and coliform in soil were detected at the levels of $6.0{\pm}0.3$ and $3.6{\pm}1.6$ log CFU/g, and levels of water were $3.5{\pm}0.7$ and $1.9{\pm}0.7$ log CFU/mL, while E. coli wasn't detected in all sample. However, coliform in water wasn't appropriate for criteria, and E. coli O157 was detected about 22% in some farms, so it needs ways to prevent contamination by human and animals excrements. In conclusion, it needs proper management to prevent cross-contamination of hazards although physical and chemical hazard level were appropriate for GAP criteria while biological hazard wasn't.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.314-315
• /
• 2012

최근들어 반도체 및 디스플레이 소자의 구조가 복잡해짐에 따라 다층 박막 증착에 대한 중요성이 날로 증가하고 있다. 본 연구에서는 다층 박막을 효율적으로 증착하기 위해 회전이 가능한 육각건을 개발하였고, 이를 이용하여 에너지 절약형 단열 유리 증착 공정을 구현 하였다. 개발된 회전형 육각건은 기존 플래너형 스퍼터링 건의 확장형으로서 최대 6개의 물질을 하나의 챔버에서 증착이 가능하도록 구성되었다. 기존 공정의 경우 서로 다른 물질 증착을 위해서는 각각의 챔버가 필요한 반면, 회전형 육각건을 이용할 경우 하나의 챔버에서 공정을 진행할 수 있어 원가 절감이 가능하다. Fig. 1은 개발된 회전형 육각건의 모식도로서, 스퍼터링 타겟이 장착 가능한 건과, 회전부로 구성되어 있다. 이를 이용하여 투명전극-금속-투명전극-금속-절연체로 구성되어 있는 에너지 절약형 단열 유리용 다층 박막 증착 공정을 개발하였다. 이때 알루미늄이 도핑된 ZnO (AZO)는 RF 마그네트론 스퍼터로, 금속 박막은 DC 스퍼터, $SiO_2$ 및 SiN과 같은 절연 박막은 $O_2$와 $N_2$ 분위기에서 반응성 RF 스퍼터로 각각 증착하였다. Base pressure는 $10^{-7}$ torr였으며, 증착 시 공정 압력은 1~3 mTorr로 조정하였다. 증착 균일도 향상을 위해 20 rpm의 속도로 기판을 회전시켰다. Fig. 2(a)는 ZnO-Ag-ZnO 구조로 이루어진 다층 박막의 단면을 관찰한 투과전자 현미경 사진으로 각 층간의 계면이 뚜렷하게 나타남을 확인할 수 있으며, 각 층간의 intermixing 현상이 발생하지 않음을 확인 가능하다. 이를 보완하기 위해 Fig. 2(b)에서 보는 바와 같이 XPS를 이용하여 depth profile을 측정하였다. 각 층에서 서로 다른 물질이 발견되는 현상, 즉 교차 오염이 발생함에 따라 나타나는 intermixing 없이 거의 순수한 형태의 ZnO, Ag 박막 성분이 검출되었다. 이는 6개의 서로 다른 물질이 장착된 회전형 육각건을 이용하여 고 품질의 다층 박막 증착이 가능함을 제시하는 결과이다. 증착된 다층 박막의 균일도는 3.8%, 가시광선 영역에서 80% 이상의 투과도, 면저항 값은 3 ${\Omega}/{\Box}$ 이하를 보임으로서 에너지 절약형 단열 유리로서의 사양을 만족시키는 결과를 제시하였다.

• Journal of dental hygiene science
• /
• v.8 no.3
• /
• pp.183-187
• /
• 2008

The objective of this study was to assess the level of contamination of dental equipment surfaces by Staphylococcus aureus and to obtain basic information for the prevention against cross infection between students and outpatients. Human samples were collected by rubbing the oral cavity, anterior noses, and lip of students and outpatients with sterile cotton swabs. Environmental samples were collected from 11 sites at practical laboratory, 4 sites at seminar room, and 5 sites at sterilizing room before, during, and after clinical procedures. These samples were cultured on brain-heart infusion agar at $37^{\circ}C$ for 24 hours. Gram-stained and identified as S. aureus colonies were counted each period and these results were analyzed by t-test and ANOVA test. In human, oral cavity showed the greatest S. aureus counts and there were no statistically significant differences between students and outpatient. Practical laboratory revealed the greatest S. aureus among all environmental groups. The greatest number of S. aureus was observed during clinical procedures (P < 0.05) and light handles, chair head, and spittoon showed a high level of statistically significant differences. In conclusion, S. aureus was dispersed in human and dental clinical environment and increased their number during clinical procedures.

• Journal of the Korean Dietetic Association
• /
• v.9 no.3
• /
• pp.219-232
• /
• 2003

The purposes of this study were to assess the child care centers' foodservice facility, and to develop the kitchen facility model based on the general sanitation standards and guidelines in order to provide basic information for a plan review to build or renovate child care centers' foodservice facility. The scopes of the study include : 1) field assessment of the foodservice management practices and facilities in 8 public child care centers, and 2 private child care centers which they are subsidized from the government as public child care centers, 2) development of child care centers' kitchen facility model based on the General Sanitation Standards and Guidelines. The results of this study can be summarized as follows : 1. Field Assessment of the Child Care Centers' Foodservice Facility Average number of children in child care centers was 78.0$\pm$24.20, the average space of kitchen was 15.13$\pm$4.25($m^2$). Especially, the average space of kitchen was 18.49$\pm$4.35($m^2$) with enrollment capacity of 90～120 children in child care centers. The inventory level of most foods was relatively low except rice and kimchi. Kitchen facilities and equipments were similar to those of home kitchen and did not meet the standards of institutional practice. Therefore, the director in child care centers should recognize the importance of the sanitation management and pay more attention to the renovation of foodservice facilities as well as sanitation management practices. 2. Development of the Kitchen Facility Model based on the General Sanitation Standards and Guidelines The kitchen facility plan model with enrollment capacity of 100 children was developed based on the results of field assessment and literature review. Suggested kitchen space was 34.16$m^2$(6,100mm×5,600mm). This space was bigger than the results of field survey or precedent study, considered appropriate to implement the general sanitation standards. The main feature of the developed kitchen facility plan and model was product flow in one direction from the arrival of the raw material to the finished product in order to prevent cross contamination and to improve working efficiency.