• Title/Summary/Keyword: Cross Utilization

Search Result 301, Processing Time 0.027 seconds

Study on Mechanical Properties of Rice Culm (벼줄기의 기계적(機械的) 특성(特性)에 관(關)한 연구(硏究))

  • Hur, Yun Kun;Lee, Sang Woo
    • Korean Journal of Agricultural Science
    • /
    • v.9 no.2
    • /
    • pp.569-575
    • /
    • 1982
  • Mechanical properties of rice plants were tested to determine compressive force, bending force, tensile force and shear force for improvement of harvesting machines and for efficient utilization of rice culm during the proper harvesting period. Rice varieties used in this study were two Japonica varieties with Irri 348 and Jinju, and two $Indica{\times}Japonica$ hybrids with Seogwang and Taebaeg, which were grown in the standard fertilization field of Chungnam Rural Development Office. Also Jinju and Taebaeg were tested to elucidate the shearing characteristics which included shear force-strain relationship, shear force and shear energy according to the position from the ground level, the shearing angle to the rice culm, and the moisture content. 1. Compressive force, bending force, tensile force and shear force were higher In Japonica varieties than $Indica{\times}Japonica$ hybrids. 2. Shear force to overall culm length decreased progressively to upper positions in Jinju variety but a constant shear force was approximately showed between the ground level and the position of 21cm in Taebaeg variety. 3. Shear force and shear energy increased with increase of the cross sectional area, and the rates of increase were high in general up to the cross sectional area of $10mm^2$ and then they became dull very much. 4. Shear force and shear energy decreased with decrease of moisture content of rice culm after cutting up to the moisture content of 60% (w. b.) and then they did not change significantly.

  • PDF

Cross-layer Design of Joint Routing and Scheduling for Maximizing Network Capacity of IEEE 802.11s based Multi-Channel SmartGrid NAN Networks (IEEE 802.11s 를 사용한 스마트그리드 NAN 네트워크의 최대 전송 성능을 위한 다중 채널 스케쥴링과 라우팅의 결합 설계)

  • Min, Seok Hong;Kim, Bong Gyu;Lee, Jae Yong;Kim, Byung Chul
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.53 no.5
    • /
    • pp.25-36
    • /
    • 2016
  • The goal of the SmartGrid is to maximize energy efficiency by exchanging bi-directional real-time power information with the help of ICT(Information and Communication Technology). In this paper, we propose a "JRS-MS" (Joint Routing and Scheduling for Multi-channel SmartGrid) algorithm that uses numerical modeling methods in IEEE 802.11s based STDMA multi-channel SmartGrid NAN networks. The proposed algorithm controls the amount of data transmission adaptively at the link layer and finds a high data-rate path which has the least interference between traffic flows in multi-channel SmartGrid NAN networks. The proposed algorithm improve transmission performance by enhancing network utilization. By comparing the results of performance analysis between the proposed algorithm and the JRS-SG algorithm in the previous paper, we showed that the JRS-MS algorithm can improve transmission performance by maximally utilizing given network resources when the number of flows are increasing in the multi-hop NAN wireless mesh networks.

디자인 지식창출을 위한 검색시스템 구축

  • 임옥수;오민권;정인수;유의상
    • Archives of design research
    • /
    • v.16 no.1
    • /
    • pp.35-44
    • /
    • 2003
  • In the past era, acquisition and utilization of useful information was the main origin of competition. Nowadays, unlike that era, is the era of knowledge information(management) in which we should create a new knowledge on the basis of information and apply it to the field of practice. And more acquisition of information is no more the competitive power of any person, any company and any nation because in such the era of knowledge management, anyone can access and get the information he needs, utilizing internet-based searching system. Such demands of the times of knowledge management change rapidly in each field through knowledge management system and researches about knowledge management are actively processed in various academic branches. However, in our field of design, researches about those demands(knowledge management) still remain on the level of one-dimensional searching service for general data about design. Therefore, in this study, we developed building database of researches on form, color, aesthetical elements, preference image word, satisfaction etc. about CI/BI of home electronics goods, living goods, apparels, and food goods companies, also suggesting searching system through which you can obtain useful data and information helpful for designers to process CI/BI works of new product by using that database. Especially, in case of developing specific CI/BI, various search results through help of suggested system will supply a useful design concept. And more, cross table which is the result of analysis two-dimensional categorical data about existing design factors(such as form, color, aesthetical elements, preference image word, and satisfaction) will make contribution for designers to create a new design knowledge.

  • PDF

Diversity and origin of bottle gourd, Lagenaria

  • Yuasa, Hiroshi
    • Proceedings of the Plant Resources Society of Korea Conference
    • /
    • 2002.11a
    • /
    • pp.96-97
    • /
    • 2002
  • Bottle gourd, Lagenaria siceraria, is one of the oldest cultivated plants. To bigin with, its fruit was used as a complete liquid bottle or container. It was a very widespread cultivated plant in prehistoric times, for example (there) is a report from Peru as early as between 13,000 B.C and 11,000 B.C. The dug-out finds in Japan proved to be about 95,000 years old according to the /sup 14/C analysis. The bottle grourd was the most important plant before the invention of pottery in many areas of Asia, New Guinea, Polynesia, America, and Africa. I would like to suggest that there should be "The Bottle Gourd Age" prior to the Pottery Age. Bottle gourds are also used for various purposes such as food, masks, pipes, musical instruments, medicine, symbols, artistic products and also as penis-sheaths of men's attire. Their purposes number more than 220 including 70 varienties of containers or bottles. I consider that its utilization should be called a culture, as it were, "The gourd culture." The shape and the size of the fruit of bottle gourd have a larger variety than those of any other plant. As for the size, it is reported that they range from those that are shorter than 3cm to those that are ovoid and longer than 60cm in diameter. With regard to the shape of its fruit, the bottle gourd can be classified into 7 groups and even more than 30 races, considering the difference of the size. The seeds are so variable without two horn-like projections, with smooth surface or longitudinalines, white or brown, with smooth corky margin. Generally, it seems that there is no correlation between seem shape and fruit shape. My study shows that the seeds of gourd. My study shows that the seeds of gourd in Asia are so simple in shape and in color except for the size. But the seeds of those in Africa are various and seem to be beyond the confines. Explaining the great diversity of the seeds of those in Africa therefore, they appear to have no correlation among the types of fruit of the bottle gourd with African origin. It might be supposed that another 4 wild Lagenaria spp. distribute only in Africa. The intraspecies hybrid is confirmed between the bottle gourd, Lagenaria siceraria, and wild L. spehaerica. And Fl hybrid is sterile: it has no fertility. However, even though the shapes of the fruit and the seeds are different, they can cross with each other. Moreover, their hybrids grow up to be extremely vigorous and have normal fertility. Fruit shapes of Fl plants are similar to those of their parents, if they have the same character. Whereas, the fruit shape often became different from each other when the cross occurs between those with different fruit shapes. It is shown that dumbbell shapes, HYOTAN in Japanese, is recessive while its bitterness is dominant. Thus the character of F2 hybrids Is segregative. I'll give further particulars of the heredity of the groud in my lecture.

  • PDF

Application of Methodology for Microbial Community Analysis to Gas-Phase Biofilters (폐가스 처리용 바이오필터에 미생물 군집 분석 기법의 적용)

  • Lee, Eun-Hee;Park, Hyunjung;Jo, Yun-Seong;Ryu, Hee Wook;Cho, Kyung-Suk
    • Korean Chemical Engineering Research
    • /
    • v.48 no.2
    • /
    • pp.147-156
    • /
    • 2010
  • There are four key factors for gas-phase biofilters; biocatalysts(microorganisms), packing materials, design/operating techniques, and diagnosis/management techniques. Biofilter performance is significantly affected by microbial community structures as well as loading conditions. The microbial studies on biofilters are mostly performed on basis of culture-dependent methods. Recently, advanced methods have been proposed to characterize the microbial community structure in environmental samples. In this study, the physiological, biochemical and molecular methods for profiling microbial communities are reviewed, and their applicability to biofilters is discussed. Community-level physiological profile is based on the utilization capability of carbon substrate by heterotrophic community in environmental samples. Phospholipid fatty acid analysis method is based on the variability of fatty acids present in cell membranes of different microorganisms. Molecular methods using DNA directly extracted from environmental samples can be divided into "partial community DNA analysis" and "whole community DNA analysis" approaches. The former approaches consist in the analysis of PCR-amplified sequence, the genes of ribosomal operon are the most commonly used sequences. These methods include PCR fragment cloning and genetic fingerprinting such as denaturing gradient gel electrophoresis, terminal-restriction fragment length polymorphism, ribosomal intergenic spacer analysis, and random amplified polymorphic DNA. The whole community DNA analysis methods are total genomic cross-DNA hybridization, thermal denaturation and reassociation of whole extracted DNA and extracted whole DNA fractionation using density gradient.

A Comparative Study on the Administration and Utilization of UNESCO's Intangible Cultural Heritage - Kimjang and Washoku in Korea and Japan - (유네스코 인류무형문화유산의 관리와 활용 현황에 대한 한일 비교 연구 - 김장문화와 와쇼쿠(和食)를 중심으로 -)

  • Kim, Hyun-Jung
    • Cross-Cultural Studies
    • /
    • v.50
    • /
    • pp.197-224
    • /
    • 2018
  • Korea's Kimjang and Japan's Washoku were listed in the UNESCO's Intangible Cultural Heritage of Humanity in 2013. Kimjang and Washoku not only have the meaning of a long tradition or national representative food. Additionally, UNESCO admitted the value of Kimjang and Washoku that allows members of society to share together and strengthen their solidarity through the use of it. And the identity of each nation is well represented in the Kimjang and Washoku effort. The Kimjang is managed by the Intangible Cultural Properties Department of the Cultural Heritage Administration. Likewise, the Washoku is managed by the Department of Washokusitsu of Japan's Agriculture Ministry. In regards to festivals, they are the most representative of Kimjang's contents in Korea. Kimjang can participate with a consensus of all people and must do it before the coming winter months. In this way, it is very suitable for the presentation of a festival. And there are many festivals related to Washoku in Japan, mainly manifested with local specialties. We have seen that Japan has many kinds of festivals, which encourages it to be called and known as the country of festivals. And Washoku is being fostered as the core content of the 'Cool Japan Strategy' because it has become world-renowned since it was listed as an intangible cultural heritage.

An Analysis the Relationship between User characteristics by Forest Welfare Facilities: Focusing on Correspondence Analysis (산림복지시설별 이용객 특성과의 관계 분석: 대응분석을 중심으로)

  • Dong-Hoon Kim;Byung-Hoon Kang;Eun-Jee Lee;Hee-Ji Kang;Jeong-Hee Lee
    • Journal of Korean Society of Forest Science
    • /
    • v.113 no.1
    • /
    • pp.1-13
    • /
    • 2024
  • This study used the results of the 2022 national survey of forest welfare facilities and space users conducted in the Republic of Korea to identify the associations and combination patterns among use of forest welfare facilities and various user characteristics. In addition, a correspondence analysis-namely, a categorical data analysis-was performed regarding four facilities: National Natural Recreation Forest, National Soopchewon, National Forest Trail, and National Healing Forest. The cross-analysis revealed highly significant differences (p < .001) in the age, household income per month, means of transportation, companion type, path to information acquisition, and purpose of visit among the users of forest welfare facilities. Moreover, the results of the correspondence analysis demonstrated that users of National Soopchewon and National Healing Forest were distinguished from users of the other forest welfare facilities based on demographic characteristics such as age and household income per month. In addition, the means of transportation of National Forest Trail users differed from that of users of the other forest welfare facilities. Moreover, users of National Soopchewon were associated with the type of public group visit, acquisition of information from the websites of related institutions and facilities and via online portals, and the purpose of participating in education and experiencing education programs. Therefore, the companion type, path to information acquisition, and purpose of visit on the part of users of National Soopchewon could be differentiated from those of users of other forest welfare facilities. The findings of this study revealed the associations and combinations among forest welfare facilities and the characteristics of users of such facilities, with the scope of utilization of the forest welfare facility user data being expanded via correspondence analysis.

Preparation of EVA/Intumescent/Nano-Clay Composite with Flame Retardant Properties and Cross Laminated Timber (CLT) Application Technology (난연특성을 가지는 EVA/Intumescent/나노클레이 복합재료 제조 및 교호집성재(Cross Laminated Timber) 적용 기술)

  • Choi, Yo-Seok;Park, Ji-Won;Lee, Jung-Hun;Shin, Jae-Ho;Jang, Seong-Wook;Kim, Hyun-Joong
    • Journal of the Korean Wood Science and Technology
    • /
    • v.46 no.1
    • /
    • pp.73-84
    • /
    • 2018
  • Recently, the importance of flame retardation treatment technology has been emphasized due to the increase in urban fire accidents and fire damage incidents caused by building exterior materials. Particularly, in the utilization of wood-based building materials, the flame retarding treatment technology is more importantly evaluated. An Intumescent system is one of the non-halogen flame retardant treatment technologies and is a system that realizes flame retardancy through foaming and carbonization layer formation. To apply the Intumescent system, composite material was prepared by using Ethylene vinyl acetate (EVA) as a matrix. To enhance the flame retardant properties of the Intumescent system, a nano-clay was applied together. Composite materials with Intumescent system and nano - clay technology were processed into sheet - like test specimens, and then a new structure of cross laminated timber with improved flame retardant properties was fabricated. In the evaluation of combustion characteristics of composite materials using Intumescent system, it was confirmed that the maximum heat emission was reduced efficiently. Depending on the structure attached to the surface, the CLT had two stages of combustion. Also, it was confirmed that the maximum calorific value decreased significantly during the deep burning process. These characteristics are expected to have a delayed combustion diffusion effect in the combustion process of CLT. In order to improve the performance, the flame retardation treatment technique for the surface veneer and the optimization technique of the application of the composite material are required. It is expected that it will be possible to develop a CLT structure with improved fire characteristics.

Entry Types and Locational Determinants of North Korean Workers in Cross-border Regions between North Korea and China (중국 대북 접경지역의 북한 노동력 진입 유형과 요인)

  • Lee, Sung-Cheol;Lee, Yong-Hee;Kim, Boo-Heon
    • Journal of the Economic Geographical Society of Korea
    • /
    • v.22 no.4
    • /
    • pp.438-457
    • /
    • 2019
  • The main purpose of this paper is to identify the entry types and locational determinants of North Korean workers in cross-border regions between North Korea and China. More specifically, the paper has attempted to divide the entry type of them in the regions into two; 1) entry via transactions between Chinese traders with North Korea and North Korea trade companies, and 2) entry via transactions between Korean-Chinese middlemen and North Korean trade companies. Also, it has analyzed main factors of their locational determinants in the spatial contexts of the regions. There have been changes in two perspectives in terms of the entry paths and types of them in accordance with the transformation of characteristics of United Nations sanction against North Korea from 'call-upon' to 'decide' after UN Security Council Resolution 2094 in 2013. Firstly, main agents who have dealing with North Korean trade companies which have right to dispatch North Korean workers have been changed from Chinese traders into Korean-Chinese brokers who are specialized in the introduction of North Korean workers with one-stop service from visa administrative to labor managements. Secondly, there has been a transfer of North Korean workers in the regions from formal to informal workers who has been admitted into China with a short stay or a tourist visa, and then remained illegally to be employed in China. Therefore, as demands on service which is able to guarantee the security of North Korean informal workers and their managements have increased, Korean-Chinese brokers have been stimulated in the regions after the operation of real international sanctions against overseas North Korean workers. In addition, the main factors of their locational determinants in cross-border regions between North Korea and China are could be analyzed in three perspectives; 1) an increase in real wages in accordance with the reform of the Chinese social insurance system after 2011, 2) the structural vulnerability of labor markets in the regions, 3) the utilization of stable and manageable workers.

A Study on the Calculation Method for Flexural Strength of One-way Hollow Slabs (일방향 중공슬래브의 휨강도 산정방법에 관한 연구)

  • Kim, Hyun-Su;Lim, Jun-Ho;Kang, Joo-Won
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.25 no.6
    • /
    • pp.541-548
    • /
    • 2012
  • The hollow slab has advantages that its self-weight does not greatly increase notwithstanding the increase of its thickness and its flexural performance does not significantly degrade in comparison with general reinforced concrete slab. However, the utilization of the hollow slab is currently being underestimated in spite of structural system that enables economic design of building and construction of eco-friendly structure. the significant reasons for this situation is that the method of structural analysis and design for hollow slab is not generalized. In this study, to consider practical compressive zone of hollow slab, the equation for its flexural strength is proposed by the volume of compressive stress block according to neutral axis location in hollow section assumed. Existing estimation method of flexural strength of hollow slab considering only compressive zone above hollow part is evaluated as the most conservative method and the method estimating flexural strength by two alternative cross-section of hollow slab is evaluated as more practical method.