• Asian-Australasian Journal of Animal Sciences
• /
• v.7 no.2
• /
• pp.165-169
• /
• 1994

Forty cross bred ($168\;{\pm}\;28\;kg$) bull calves were offered either untreated (US) or urea ammonia treated (TS) rice straw at five levels of feeding, namely; 60, 80, 100, 120 140% of ad libitum. Ad libitum level for each animal was estimated over a period of one month, which was followed by a preliminary period of 21 days and a collection period of 15 days. The maximum organic matter intake (OMI-kg/100 kg BW) were 2.08 and 3.35 for US and TS, respectively and urea treatment increased the maximum OMI by 61% than for US. In order to reach maximum intake the amount feed refusal should be 25% for US, but with TS maximum intake was not reached even when the amount of feed refused was 39% of that consumed. The OMD of US significantly decreased with increase in OMI, whereas with TS the decrease was not significant. The inability of animals to select between stems and leaves particularly in TS might be one of the reasons for its constant digestibility. Considering the substantial increases in intake and the negative effect on digestibility of US, further trials are warranted, as well as studies to determine the practical implications.

• Asian-Australasian Journal of Animal Sciences
• /
• v.7 no.2
• /
• pp.159-164
• /
• 1994

Two studies were conducted using 40 cross-bred bulls to study the effect of chopping, moistening with water or common salt solution on the nutritive value of rice straw (variety BG-400). Moistening with water did not significantly effect digestibility or intake of rice straw. As compared to straw fed in the long form, chopping did not significantly influence intake (2.33 vs 1.97kg $100kgBW^{-1}day^{-1}$, respectively), but significantly (p<0.05) decreased the digestibility (41.6 vs 37.4%) and intake of digestible dry matter (0.99 vs 0.74kg $100kgBW^{-1}day^{-1}$). Rice straw moistened with 2 or 4% common sea salt solution and directly fed to animals (Exp. 1) did not significantly effect its digestibility (43.9 and 43.1%, respectively) or intake (2.66 or 2.59kg $100kgBW^{-1}day^{-1}$, respectively), but over night storing of 2% salt solution sprayed straw (Exp. 2) significantly reduced its digestibility (33.6%). The latter is difficult to explain because the sodium concentration (mg/g straw dry matter) was lower than 4% salt solution treatment used in experiment 1 (3.30 vs 5.22). It is concluded that chopping, moistening with water or NaCl salt solution did not significantly improve the nutritive value of rice straw.

• Journal of Korean Academy of Nursing Administration
• /
• v.17 no.2
• /
• pp.209-215
• /
• 2011

Purpose: This study was done to examine the level of use of essential oriental nursing terms and related characteristics among nurses in oriental medicine (OM) hospitals. Method: A cross-sectional survey design with convenience sampling was employed. Questionnaires were used to collect data from 315 nurses in seven university-affiliated OM hospitals. The questionnaire included 174 oriental nursing terms about actions, tests, drugs, and theories. Multiple regression analysis was performed to determine factors associated with the level of use. Results: The response rate was 98.1% (n=309). Overall mean score for use of essential oriental nursing terms was 2.7(${\pm}\;0.7$) on a five-point Likert scale. Significant factors associated with the level of use were workplace and knowledge of oriental nursing theory terms. Nurses who worked in nursing care wards and those who had a higher level of knowledge of oriental nursing theories had a higher level of use. Conclusions: These findings indicate that level of use of essential oriental nursing terms were below average. Educational programs to enhance knowledge of oriental nursing theories need to be implemented for nurses in OM hospitals, considering their workplace, in order to facilitate nursing data sharing and communication among healthcare providers.

• Journal of Korean Academy of Nursing Administration
• /
• v.13 no.3
• /
• pp.345-351
• /
• 2007

Purpose: The purpose of this study was to identify the relationship between patient characteristics and patient satisfaction. Methods: A cross-sectional questionnaire survey was conducted in an acute care hospital. The subjects were 317 patients discharged from general medical and surgical nursing care units during September, 2005. Patient satisfaction was measured using the short-form satisfaction scale of Hwang and Park(2001). Additional information about patient characteristics, including general demographics and health care utilization variables, was collected from the hospital information systems. Multiple regression analysis was performed to determine patient characteristics influencing patient satisfaction. Results: Patients were satisfied with hospital care with an average of 4.10 on a five-point Likert scale. Patient characteristics explained 13.5% of the variance of patient satisfaction. The significant factors influencing patient satisfaction were patients' age and perceived health status. There was no significant relationship between structural variables and patient satisfaction. Conclusion: This study showed that patients' characteristics were significant factors explaining patient satisfaction. Therefore, these characteristics should be adjusted in reporting patient satisfaction as an indicator for hospital-level or department-level rating.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.6
• /
• pp.729-743
• /
• 1989

A spread spectrum(ss) communication system has a lot of advantage, such as realzation of asynchronous code division multiplexing(CDM), robutness to narrow-band interference, impulse noise, privacy function, and so on. We have considered utilization of these advantage to develop a local area network(LAN) using such a transmission channel as power-line. In a power-line, however, restricted bandwidth under the law makes it difficult to carry out CDM, and in a radio channel the sysstem has a near-far problem. These problems originate in co-channel interference, which is due to cross-correlation among pseudo-noise sequences of every channel in CDM. In this paper, we propose a new scheme of easily cancelling co-channel interference and investigate its performance by constructing a LAN using SS technique.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.1
• /
• pp.56-63
• /
• 1999

Machinability of three Korean domestic bamboo species, Phyllostachys pubescens Mazel, Phyllostachys nigra var. henonis Stapf. and Phyllostachys bambusoides S. et Z., was studied to investigate the possibility of utilization of Korean domestic bamboo species as raw material for industry. Splitting force reached a maximum within the first inch of knife travel and diminished thereafter. Parallel-sided wedge-type knife with sharpness angle of 15 degree required the lowest maximum splitting force. Roughnesses of surfaces developed during planing and sawing of bamboo were lower than those of Pinus radiata D. Don and quality of ripped surface was better than that of cross-cut surface on bamboo. 62.5 hours were required to dry 12mm-thick Phyllostachys pubescens Mazel from moisture content of 60% to moisture content of 10% at $70^{\circ}C$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3144-3154
• /
• 2009

Recently, people seek to recognize organizationally and cross sectionally the period work of a company such as manufacturing, retail, distribution, accounting, and personnel management in order to maximize company profit. Also, the ERP system, which is used as a management concept for plan management designed to optimize the utilization of management resources in an enterprise like manner, has been introduced for the same purpose. This study has examined the ERP system, which has been currently set up, for the parent company, S. The study has evidentially analyzed the system efficiency and satisfaction level of customers by examining implementation effects after onsite application and by seeking ways of improvement after recognizing the difficulty linked with use discovered after onsite application of the system and rejection by customers by conducting a questionnaire survey.

• The Korean Journal of Health Service Management
• /
• v.8 no.2
• /
• pp.139-148
• /
• 2014

The purpose of this study was to analyze the factors affecting the unmet dental needs of Koreans. In relation to the subjects and methodology for this study, the data from the 5th national health nutrition survey which had been conducted between 2010 and 2012 were analyzed by using the PASW statistics 18.0 (SPSS Inc., Chicago, IL, USA), a statistical program, through the frequency analysis of complex samples, cross analysis of complex samples, and logistics regression analysis of complex samples. The results of analysis showed that the rate of unmet dental needs stood at 35.3% of all subjects. Moreover, to determine the factors related to the unmet dental needs, the logistics regression analysis of complex samples was conducted. The results of analysis showed that the demographic and socio-economic factors and oral health condition factors had relationship with unmet dental needs. It is necessary to consider all the objective dental treatments that reflect specific dental diagnosis from a comprehensive standpoint.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.1
• /
• pp.58-65
• /
• 2013

Currently, many high-rise buildings are built in Korea for land-efficient utilization and vista. In high-rise buildings this tall, the use of high-strength concrete is essential to reduce the cross-section of structure members and secure axial load. However, this high strength concrete is vulnerable to spalling by fire, due to the water vapor pressure caused by the very high temperature in fire. To prevent this, the main method used is to reinforce the concrete with fiber. However, there has been little research on the pumpability of fiber reinforced high strength concrete. For this reason, this study features a performance review based on the properties and pumpability of fiber reinforced high strength concrete. In addition, the parameter of rheology was measured by extracting mortar from the concrete, and friction factor was measured through a 400 m horizontal pipe pumping test using the fiber reinforced high strength concrete. The basic information on fiber reinforced high strength concrete that we obtain through the experiments and review will contribute to the field.

• Korean Journal of Occupational Health Nursing
• /
• v.24 no.4
• /
• pp.340-351
• /
• 2015

Purpose: This study was conducted to identify the job competencies of HIV counseling nurses and to figure out the importance, level of difficulty, and performance frequency of the competencies. Methods: The job competencies were drawn from 22 HIV counseling nurses by developing new models and utilizing specialist groups. The importance, level of difficulty, and performance frequency of the competencies were analyzed using the average and deviation. Results: The results of this study identified 6 job competencies such as counseling performance, expertise utilization, cooperation, support, administration, and self-development, 28 sub-competencies, and 48 job descriptions. Out of the 6 job competencies, counseling performance recorded high levels in the importance, level of difficulty, and performance frequency. Conclusion: The study results will be used as the basic data of the training programs for strengthening the job competencies of HIV counseling nurses. Furthermore, it is expected that the results will contribute to the prevention of HIV/AIDS transmission, the core of the national HIV/AIDS control programmes, and the improved health and quality of life in people living with HIV.