• Title/Summary/Keyword: Cross Structure

Search Result 2,457, Processing Time 0.03 seconds

Quantitative Study on the Forms and Distributions of Gapyoungchon Potholes (가평천 포트홀의 형태 및 분포에 관한 정량 연구)

  • JEON, Hongkun;PARK, Jongkwan
    • Journal of The Geomorphological Association of Korea
    • /
    • v.18 no.4
    • /
    • pp.213-221
    • /
    • 2011
  • The purpose of this study is to clarify the characteristics of forms and distributions of Gapyoungchon potholes. Different sizes of 153 potholes were distributed in the upper stream marginal area that was 30×25m, and over 70 percent among them were egg-shaped potholes. A development of joint in pothole was not important to make potholes in the stream but the mean size of potholes with joint was larger than without joint. Moreover, the schistosity structure of the bedrock was more important factor to develop potholes in this area. Finally, four cross sectional faces were found in this study area. From the reason, Gapyoungchon potholes are distributed on the rock terraces.

William Blake and the Network of Knowledge: Centering on the Communication of Poetry and Science (윌리엄 블레이크와 지식의 네트워크 -시와 과학의 소통을 중심으로)

  • Lee, Sungbum
    • Journal of English Language & Literature
    • /
    • v.58 no.4
    • /
    • pp.723-752
    • /
    • 2012
  • Although his mythic poetry deals with the fall and resurrection of Albion as the origin of humankind, William Blake (1757-1827) simultaneously links it to the professionalization and unification of disciplinary knowledge itself. He particularly takes a great interest in the cross-referential relation of poetry to science. He argues for the communication of poetry and science on equal footing with each other without the former's prioritization over the latter, or vice versa. In his works Vala, or The Four Zoas (1797-1807) and Jerusalem: The Emanation of the Giant Albion (1804-1820), on which I focus in this essay, Blake's primary problematic is to display strong conflicts among different systems of knowledge. I approach this issue in light of the ideological clash of Newtonian thought, Romantic thought, and postmodern thought. In his poetry, Blake thematizes the very clashes of these different thought patterns. From the standpoint of Romantic thought, first of all, Blake problematizes Newtonian Enlightenment. He criticizes abstract universalization both in poetry and science, which Urizen, one of four Zoas, propagates. Protesting against Urizen's Newtonism, Los values "living form." Thus, Blake demonstrates, through this figure, that poetic imagination and scientific organicism are discursively communicative. Blake, however, also questions the network of Romantic science and Romantic poetry so as to suggest what current critics would call postmodern thought. Blakean postmodernism pursues the self-similarity of organic structure in science and poetry. Precisely, Blake sees polypus as a proliferation of organic body; he arranges four Zoas' self-repetitive stories in a non-linear way. Blake aspires for the conflicting coexistence of different thought patterns.

Advances of Self-incompatibility Genetics in Genus Fagopyrum

  • Woo Sun-Hee;Soo-Jeong Kwon;Sung-Hyun Yun;Min-Young Park;Probir Kumar Mittra;Swapan Kumar Roy;Seong-Woo Cho
    • Proceedings of the Korean Society of Crop Science Conference
    • /
    • 2022.10a
    • /
    • pp.191-191
    • /
    • 2022
  • Heterostyly continues to fascinate evolutionary biologists interested in heredity, evolution, breeding, and adaptive function. Polymorphism demonstrates how simply inherited developmental changes in the location of plant sexual associations can have important consequences for population pollination and mating biology. In contrast to homozygous self incompatibility, only a small number of mating phenotypes can be maintained in the population because insect pollinators have limitations in achieving multiple segregation sites for pollen deposition. Field studies of pollen tube growth have shown that reciprocal style-stamen polymorphisms function to increase the capacity of insect-mediated cross-pollination. The genetic pattern of style morphs is well established in various taxa, but despite recent advances, the identity, number, and structure of the genes controlling the heteromorphic syndrome have been poorly elucidated. The phenomenon of heterostyly in buckwheat has been controlled by gene complex concentrate to S-locus. Homomorphic autogamous buckwheat strains were established by the interspecific hybridization. Backcrossing of this line to the common buckwheat (pin) and selecting homostylar progenies made it possible to introduce the self-compatible gene into common buckwheat. In the result, we obtained the BC9F2 generation, and defined the strong linkage between flower type and self-incompatibility by microscopic observation of pollen tube growth. This finding suggests that self-incompatibility character is not controlled by one gene. Moreover, we defined the strong linkage between flower type and self-incompatibility. It strongly supports the S supergene theory. Therefore, we have plan to elucidate the heterostyly self-incompatibility by using molecular genetics, proteome analysis and apply to exploitation of buckwheat improvement. In near future, the expression of heterozygous syndromes in genus Fagopyrum with single isolated heterozygous species may provide clues to early stages of polymorphic assembly and shed light on evolutionary models of heterozygous strains.

  • PDF

Evaluation of Cross-Sectional Damage for RC Column Subjected to Axial Loading and Steel Corrosion (철근 부식과 축방향 하중을 받는 철근-콘크리트 기둥 단면의 손상 평가)

  • Changyoung Kim;Ki Yong Ann
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.11 no.4
    • /
    • pp.476-483
    • /
    • 2023
  • The present study concerns modelling the structural behaviour for concrete structure into the crack initiation at corrosion of steels. The degradation source included the axial load and steel corrosion. A development of the rust formed on the steel surface was considered with the interfacial gap between steel and concrete. As a result, the tensile damage could occur on the surface of concrete into the cracking with no steel corrosion, which could be further developed by the increasing rust formation, while the cracking at the steel-concrete interface was mainly attributed to the compressive deformation, being restricted within the interfacial zone.

Reshaping the FDI Network in the Global Economic Environment (글로벌 경제 환경과 해외직접투자 네트워크의 공간적 재편)

  • Kisoon Hyun
    • Journal of the Economic Geographical Society of Korea
    • /
    • v.26 no.3
    • /
    • pp.256-273
    • /
    • 2023
  • This study analyzed the structural changes in the global foreign direct investment (FDI) network using stock data from the International Monetary Fund's Coordinated Direct Investment Survey (CDIS) for 2009~2021. The results showed that the COVID-19 pandemic had a negative impact on the FDI links between countries and the activities of reciprocal relationships. The United States, the Netherlands, and the United Kingdom consistently play central roles in the global FDI network. The degree centrality of China has changed significantly over time in confronting the volatile situation of the world economy. Cross-tabulation analysis revealed a significant association between FDI clusters and geographic regions. Within each cluster, the linkage structure of FDI partners of closely connected individual countries has exhibited differential characteristics as the global economic environment changes.

Analysis of Electrical Characteristics due to Deep Level Defects in 4H-SiC PiN Diodes (4H-SiC PiN 다이오드의 깊은 준위 결함에 따른 전기적 특성 분석)

  • Tae-Hee Lee;Se-Rim Park;Ye-Jin Kim;Seung-Hyun Park;Il Ryong Kim;Min Kyu Kim;Byeong Cheol Lim;Sang-Mo Koo
    • Korean Journal of Materials Research
    • /
    • v.34 no.2
    • /
    • pp.111-115
    • /
    • 2024
  • Silicon carbide (SiC) has emerged as a promising material for next-generation power semiconductor materials, due to its high thermal conductivity and high critical electric field (~3 MV/cm) with a wide bandgap of 3.3 eV. This permits SiC devices to operate at lower on-resistance and higher breakdown voltage. However, to improve device performance, advanced research is still needed to reduce point defects in the SiC epitaxial layer. This work investigated the electrical characteristics and defect properties using DLTS analysis. Four deep level defects generated by the implantation process and during epitaxial layer growth were detected. Trap parameters such as energy level, capture-cross section, trap density were obtained from an Arrhenius plot. To investigate the impact of defects on the device, a 2D TCAD simulation was conducted using the same device structure, and the extracted defect parameters were added to confirm electrical characteristics. The degradation of device performance such as an increase in on-resistance by adding trap parameters was confirmed.

Comparative Analysis of DTM Generation Method for Stream Area Using UAV-Based LiDAR and SfM (여름철 UAV 기반 LiDAR, SfM을 이용한 하천 DTM 생성 기법 비교 분석)

  • Gou, Jaejun;Lee, Hyeokjin;Park, Jinseok;Jang, Seongju;Lee, Jonghyuk;Kim, Dongwoo;Song, Inhong
    • Journal of The Korean Society of Agricultural Engineers
    • /
    • v.66 no.3
    • /
    • pp.1-14
    • /
    • 2024
  • Gaining an accurate 3D stream geometry has become feasible with Unmanned Aerial Vehicle (UAV), which is crucial for better understanding stream hydrodynamic processes. The objective of this study was to investigate series of filters to remove stream vegetation and propose the best method for generating Digital Terrain Models (DTMs) using UAV-based point clouds. A stream reach approximately 500 m of the Bokha stream in Icheon city was selected as the study area. Point clouds were obtained in August 1st, 2023, using Phantom 4 multispectral and Zenmuse L1 for Structure from Motion (SfM) and Light Detection And Ranging (LiDAR) respectively. Three vegetation filters, two morphological filters, and six composite filters which combined vegetation and morphological filters were applied in this study. The Mean Absolute Error (MAE) and Root Mean Square Error (RMSE) were used to assess each filters comparing with the two cross-sections measured by leveling survey. The vegetation filters performed better in SfM, especially for short vegetation areas, while the morphological filters demonstrated superior performance on LiDAR, particularly for taller vegetation areas. Overall, the composite filters combining advantages of two types of filters performed better than single filter application. The best method was the combination of Progressive TIN (PTIN) and Color Indicies of Vegetation Extraction (CIVE) for SfM, showing the smallest MAE of 0.169 m. The proposed method in this study can be utilized for constructing DTMs of stream and thus contribute to improving the accuracy of stream hydrodynamic simulations.

GoAsap: A Proposal for a Golang New Version Detection and Analysis System from a Static Analysis Perspective (GoAsap: 정적분석 관점에서 바라보는 Golang 신버전 탐지·분석시스템 제안)

  • Hyeongmin Kang;Yoojae Won
    • Journal of the Korea Institute of Information Security & Cryptology
    • /
    • v.34 no.4
    • /
    • pp.707-724
    • /
    • 2024
  • Recently, Golang has been gaining attention in programming language rankings each year due to its cross-compilation capabilities and high code productivity. However, malware developers have also been increasingly using it to distribute malware such as ransomware and backdoors. Interestingly, Golang, being an open-source language, frequently changes the important values and configuration order of a crucial structure called Pclntab, which includes essential values for recovering deleted symbols whenever a new version is released. While frequent structural changes may not be an issue from a developer's perspective aiming for better code readability and productivity, it poses challenges in cybersecurity, as new versions with modified structures can be exploited in malware development. Therefore, this paper proposes GoAsap, a detection and analysis system for Golang executables targeting the new versions, and validates the performance of the proposed system by comparing and evaluating it against six existing binary analysis tools.

Development of the Structure for Enhancing Capillary Force of the Thin Flat Heat Pipe Based on Extrusion Fabrication (압출형 박판 히트파이프의 모세관력 향상을 위한 구조 개발)

  • Moon, Seok Hwan;Park, Yoon Woo
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.40 no.11
    • /
    • pp.755-759
    • /
    • 2016
  • The use of heat pipes in the electronic telecommunication field is increasing. Among the various types of heat pipes, the thin flat heat pipe has relatively high applicability compared with the circular heat pipe in the electronic packaging application. The thin flat heat pipe based on extrusion fabrication has a simple capillary wick structure consisting of rectangular cross sectional grooves on the inner wall of the pipe. Although the groove serves as a simple capillary wick, and many such grooves are provided on the inner wall, it is difficult for the grooves to realize a sufficiently high capillary force. In the present study, a thin flat heat pipe with a wire bundle was developed to overcome the drawback of poor capillary force in the thin flat heat pipe with grooves, and was evaluated by conducting tests. In the performance test, the thin flat heat pipe with the wire bundle showed a lower thermal resistance of approximately 3.4 times, and a higher heat transfer rate of approximately 3.8 times with respect to the thin flat heat pipe with grooves as the capillary wick respectively. The possibility of using the wire bundle as a capillary wick in the heat pipe was validated in the present study; further study for commercializing this concept will be taken up in the future.

Eine Structure of the Pineal Body of the Snapping Turtle (자라 송과체의 미세구조)

  • Choi, Jae-Kwon;Oh, Chang-Seok;Seol, Dong-Eun;Park, Sung-Sik;Cho, Young-Kook
    • Applied Microscopy
    • /
    • v.25 no.2
    • /
    • pp.39-52
    • /
    • 1995
  • Pinealocytes in the lower vertebrate are known to have photoreceptive function. These photoreceptor cells have been characterized morphologically in various species of lower vertebrates. No such ultrastructural studies, however, were reported in fresh water turtle. The purpose of this study is to characterize the pinealocytes and the phylogenetic evoluton of these cells is discussed in terms of functional analogy. I. Light microscopy: The pineal body was divided into incomplete lobules by connective tissue septa containing blood vessels, and parenchymal cells were arranged as irregular cords or follicular pattern. In the lobules, glandular lumina were present and contained often densely stained materials. II. Electron microscopy: The pineal parenchyma had three categories of cells: photoreceptor cells, supportive cells and nerve cells. The photoreceptor cells had darker cytoplasm compared to the supportive cells, and the enlarged apical cytoplasm(inner segment) containing abundant mitochondria and dense cored vescles protruded into the glandular lumen in which lamellar membrane stacks(outer segment), dense membranous materials, and cilia were present. Some of these lamellated membrane stacks appeared to be dege-nerating while others were apparently newly formed. Constricted neck portion of the photoreceptor cells contained longitudinally arranged abundant microtubules. centrioles and cross-striated rootlets. Cell body had well developed Golgi apparatus, abundant mitochondria, dense granules($0.5{\sim}1{\mu}m$), dense cored vesicles($70{\sim}100nm$), and rough endoplasmic reticulum occasionally with dense material within its cisterna. Basal portion of the photoreceptor cells had basal processes often with synaptic ribbons, which terminate in the complicated zone of cellular and neuronal processes. Synatpic ribbons often made contact with the nerve processes and the cell processes of neighboring cells. In some instances, these ribbons were noted free within the basal process and were also present at the basal cell mem-brane facing the basal lamina. Obvious nerve endings with clear and dense cored vesicles were observed among the parenchymal cells. Photoreceptor cells of the snapping turtle pineal body were generally similar in fine structure to those of other lower verterbrates reported previously, and suggested to have both photoreceptive and secretory functions which were modulated by pinealofugal and pinealopedal nerves. The supportive cells were characterized by having large dense granules($0.3{\sim}1{\mu}m$), abundant ribosomes, well developed Golgi apparatus and rough endoplasmic reticulum. These cells were furnished with microvilli on the luminal cell surfaces, and often had centrioles, striated rootlets, abundant filaments especially around the nucleus, and scattered microtubules. Some supportive cells had cell body close to the lumen and extended a long process reaching to basal lamina, which appeared to be a glial cell. Nerve cells within the parenchyma were difficult to identify, but some large cells located basally were suspected to be nerve cells, since they had synaptic ribbon contact with photoreceptor cells.

  • PDF