• Plant Resources
• /
• v.8 no.1
• /
• pp.9-12
• /
• 2005

TO select the most suitable crop and variety of forage for productivity at the southern part of Korea, The crops of wheat, barley and rye were grown from Oct. 1999 to June 2000. Paldanghomil variety of rye crop was shown to have the highest productivity in comparison to other varieties of crops used in this experiment. It showed relatively high plant height, number of tiller, forage yield and dry matter yield. There fore, it was concluded that Paldanghomil of rye crop was the most suitable crop with high yield in the southern part of Korea. The heritabilities of all characters were estimated to be high.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.132-132
• /
• 2022

The application of direct seeding cultivation reduces time, labor, and cost. However, this application often has poor seedling establishment and leads to lower yield as compared to transplanting system. The tolerance to anaerobic and low temperature germination is important to improve seedling establishment and the wide-spread application of direct seeding method. This study was carried out to evaluate the responses of three japonica cultivars to different temperatures (15℃, 18℃, 21℃, 24℃, and 27℃) and different flooding levels (1 cm, 4 cm, 7 cm, 10 cm) during germination and seedling development. The mean survival percentage significantly increased (P<0.05) when the flooding level decreased and when temperature increased. There were significant effects of the interaction between temperature and water depth on survival percentage and seedling height. When temperature decreased from 27℃ to 15℃, the germination duration significantly increased from 6.4 days to 16.3 days while the germination speed, survival percentage, and seedling height decreased from 5.3 seeds day^-1, 61.9% and 190.6 cm to 2.2 seeds day^-1, 33.2%, and 47 cm, respectively. The increase in temperature under submergence condition was associated with the increased expression of Amy3D and ALDH2a but the decreased expression of ADH1 and PDC1. The results of this research would be used for further studies and breeding programs to improve rice seedling establishment and the application of direct seeding cultivation.

• Korean Journal of Medicinal Crop Science
• /
• v.5 no.3
• /
• pp.191-195
• /
• 1997

This study was conducted to obtain the basic information on setting up selection procedure using seedling characteristics in Angelica gigas Nakai lines. Morphological characteristics of the seedlings including height, leaf and petiole length among lines tested showed difference significantly, meaning that earlier selection was possible. Bolting rate at maturity ranged from 0.6 to 74.6% and root yield did from 350 to 3,893kg/ha. Root yield was increased in the lines with below 5% bolting rate. Heritabilities of petiole length, seedling height and leaf length in seedling stage bolting rate and root yield were high, while those of leaf length, root diameter and root length were relatively low. Bolting rate at maturity was positively correlated with seedling height, leaf length, leaf width, petiole length and number of leaves. A highly significant negative correlation was showed between root yield and seedling height, leaf length and width, petiole length, number of leaves, root length or bolting rate. From the above results the selection markers were found to be height, leaf length and petiole length in seedling stage.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.6
• /
• pp.705-711
• /
• 2016

Crimson clover, a legume crop, is a landscape crop and green manure crop that can be sowing in spring and autumn. Its red flower blooms in May, and serves various roles such as landscape composition, weeds suppressing, prevention of soil loss and nutrient on sloping land and supplying nitrogen and organic matter in soil. Thus, in order to utilize this crop in agriculture land, we evaluated the growth characteristics of crimson clover cultivated in four different soil textures; sand, sandy loam, loam, and clay loam. The nitrogen content of crimson clover was $15.8g\;kg^{-1}$ and C/N ratio was 20.3. Its plant height was 42.5 cm in sandy loam and 49.5 cm in loamy, respectively, approximately 20 cm longer than the sand and clay loam. The crimson clover in sandy loam and loam bloomed about seven days earlier than those in sand and clay loam. Regarding number of flower per hill and flower length, there were no difference among the soil textures. Dry weight of crimson clover for sandy loam and loam was $2.5Mg\;ha^{-1}$ and $2.3Mg\;ha^{-1}$, respectively, $0.8{\sim}1.1Mg\;ha^{-1}$ higher than that of sand and sandy loam. Plant height and dry weight of crimson clover increased with delaying harvest time. Nitrogen contribution in loam and clay loam was $51.3kg\;ha^{-1}$ and $53.5kg\;ha^{-1}$, respectively. Therefore, in terms of flowering properties and dry weight, the proper soil texture for the growth and development of crimson clover was sandy loam and loam.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.275-275
• /
• 2022

One of the most widely grown food crops in the world, wheat, is increasing more lodged since for increased rains and winds caused by abnormal climate. During the Green Revolution, shorter wheat cultivars were bred using many Rht genes to increase lodging resistance. However, since only some Rht genes were used for breeding shorter wheat, it may have had a limited impact on wheat breeding and reduced genetic diversity. Therefore, it is essential to search for genes that have breeding potential and affect dwarfism in order to increase the genetic diversity of dwarf characteristics in wheat. In this study, we performed the RNA-seq between 'Keumkang' and 'Komac 5' ('Keumkang' mutant) to analyze the difference in plant height. Differentially expressed genes (DEGs) analysis and Gene function annotation were performed using 265,365,558 mapped reads. Cluster set analysis was performed to compress and select candidate gene DEGs affecting plant height, stem and internode. Gene expression analysis was performed in order to identify the functions of the selected genes by condensing the results of the DEG analysis into a cluster set analysis. This analysis of these plant height-related genes could help reduce plant height, improve lodging resistance, and increase wheat yield. Its application to wheat breeding will also affect the increased genetic diversity of wheat dwarfism.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.276-276
• /
• 2022

Wheat is one of the most widely grown food crops worldwide. Extreme precipitation and wind disturbances increased due to the abnormal climate, which resulted in increased lodging. Introduction of dwarf genes in wheat significantly increased lodging resistance and productivity in wheat breeding. In this study, we performed the genotyping of dwarfing genes between 'Keumkang' and 'Komac 5' ('Keumkang' mutant). In addition, we investigated the relationship between plant height and several phenotypic characters using F₂ segregation populations derived from crosses between the two varieties. There was no significant difference in phenotypic characters between the two varieties except for plant height. In the genotyping analysis using dwarfing genes, mutations of two dwarfing gene were found to be induced between the two varieties. The four genotypes of the F₂ populations from a crossing between 'Keumkang' and 'Komac 5' were used to compare and evaluate the effects of two dwarfing genes. Plants with two single mutant dwarfing gene and double mutant dwarfing gene revealed reduced plant heights than control plants by 4.5%, 6.9%, and 33.2%, respectively. The phenotype analysis showed that double mutant dwarfing gene affected wheat stem growth as the length decreases from the second node, resulting in decreased plant height. However, there were no significant differences in the agronomic traits between mutant plants and control plant. These results may provide novel information about the effect of double mutant dwarfing gene on plant height, and may help improve lodging tolerance and wheat yield.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.2
• /
• pp.130-133
• /
• 2001

The purpose of this study was to investigate the decreased ratio of growth and yield by delayed seeding and flowering because drought of spring season often cause to delay seeding and sprout emergence. Equation of linear regression, y=-11.914x＋818.61 ($R^2$=0.916) and y=-16.96lx＋913.98 ($R^2$=-0.885) were derived from relationship between sowing date and yield of leading variety, Yangbaeckkae in 1999 and 2000, respectively. Yield was decreased by 7, 24, 40, 57, 74%, respectively, according as sowing date was delayed more 5, 15, 26, 36, 46 days than May 15, standard sowing date under the culture mulched with black P.E. film. Number of capsules per plant and length of stem bearing capsule were greatly decreased, while plant height, stem diameter, and day to flowering were affected little by delayed seeding date. Equation of linear regression, y=-0.7081x＋41.04 ($R^2$=0.861) was derived from relationship between flowering date and yield of 33 accessions. Yield was decreased by 7.7, 8.3, 9.2, 10.1, 11.2%, respectively, according as flowering date was delayed more 1, 2, 3, 4, 5 days than July 3, normal flowering date of Yangbaeckkae when it was sown on May 15, and the more flowering date was delayed, the more yield was decreased. Number of capsules per plant and length of stem bearing capsules were greatly decreased, but plant height and harvest index were decreased little by delay of flowering date

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.43 no.3
• /
• pp.129-137
• /
• 2023

Corn silage is extensively utilized in ruminant feeding on a global scale, with substantial research efforts directed towards enhancing its nutritional worth and managing moisture content. The purpose of this study was to assess the impact of normal cutting height and elevated cutting height on whole-crop corn silage. Corn was harvested at heights of 15 cm and 45 cm above the ground, respectively, 45 days after heading. The harvested corn was cut into 2-3 cm lengths and packed into 20-liter plastic silos in triplicate. The results showed that dry matter (DM), crude protein (CP), water soluble carbohydrates (WSC), and in vitro dry matter digestibility (IVDMD) of C45 were significantly higher than those of the control, while the neutral detergent fiber (NDF) was significantly lower in C45 (p<0.05). The C15 had higher yields than C45 (p<0.05). There was no significant difference in the total digestible nutrients (TDN) yield of whole-crop corn silage. The increase in cutting height resulted in a larger change in moisture content and NDF per centimeter. After 60 days-ensiling, C45 showed significantly lower NH₃-N concentrations. Moreover, C45 had significantly higher lactic acid concentration, lactic acid/acetic acid ratio, and lactic acid bacteria count compared to the control. Mold was not detected and the yeast count was less than 2 log10 cfu/g fresh matter in both control and C45. In summary, C45 improved the feeding value and fermentation quality of whole-crop corn silage at the expense of forage productivity.

• Journal of Biosystems Engineering
• /
• v.36 no.3
• /
• pp.180-186
• /
• 2011

The objective of this research was to establish the estimation method of growth information on potato using Multi-Spectral Image Sensor (MSIS) and Global Positioning System (GPS). And growth estimation map for determining a prescription map over the entire field was generated. To determine the growth model, 10 ground-truth points of areas of $4m^2$ each were selected and investigated. The growth information included stem number, crop height and SPAD value. In addition, images information involving the ground-truth points were also taken by an unmanned helicopter, and reflectance value of Green, Red, and NIR bands were calculated with image processing. Then, growth status of potato was modeled by multi-regression analysis using these reflectance value of Green, Red, and NIR. As a result, potato growth information could be detected by analyzing Green, Red, and NIR images. Stem number, crop height and SPAD value could be estimated with $R^2$ values of 0.600, 0.657 and 0.747 respectively. The generated GIS map would describe variability of the potato growth in a whole field.

• Korean Journal of Breeding Science
• /
• v.51 no.4
• /
• pp.496-503
• /
• 2019

The soybean cultivar, 'Saegeum', has been developed for preparing soy-paste and tofu. The soybean cultivars 'Daepung' and 'SS98207-3SSD-168' were crossed in 2003 to obtain 'Saegeum'. Single seed descent method was used to advance the generation from F₃ to F₅, and the plant lines with promising traits were selected from F₆ to F₇ by pedigree method. The preliminary yield (PYT) and advanced yield trials (AYT) were conducted from 2009 to 2010, and the regional yield trial (RYT) was conducted in 12 regions between 2011 and 2013. The morphological characteristics of 'Saegeum' were as follows: determinate plant type, white flower, tawny pubescence color, and brown pod color. Flowering and maturity dates were August 2, XXXX and October 17, XXXX, respectively. Plant height, first pod height, number of nodes, number of branches, and number of pods were 79 cm, 18 cm, 16, 2.3, and 44, respectively. The seed characteristics of 'Saegeum' were as follows: yellow spherical shape, yellow hilum, and the 100-seed weight was 25.4 g. 'Saegeum' was resistant to bacterial pustule and SMV in the field test, and its lodging resistance was mildly strong, whereas its shattering resistance was excellent. The ability of this cultivar to be processed into tofu, soybean malt, and other fermented products was comparable with that of 'Daewonkong'. The yield of 'Saegeum' in the adaptable regions was 3.02 ton ha^-1. Thus, 'Saegeum' is adaptable to mechanized harvesting because of its high first pod height, as well as lodging and shattering resistance. (Registration number: 5929)