• Bulletin of the Korean Chemical Society
• /
• 제15권3호
• /
• pp.241-245
• /
• 1994

A method has been developed to estimate the kinetic energy release originating from the reverse critical energy in unimolecular ion dissociation. Contribution from the excess energy was estimated by RRKM theory, the statistical adiabatic model and the modified phase space calculation. This was subtracted from the experimental kinetic energy release distribution (KERD) via deconvolution. The present method has been applied to the KERDs in $H_2$, loss from $C_6H_6^+$ and HF loss from ${CH_2CF_2}^+$. In the present formalism, not only the energy in the reaction coordinate but also the energy in some transitional vibrational degrees of freedom at the transition state is thought to contribute to the experimental kinetic energy release. Details of the methods for treating the transitional modes are found not to be critical to the final outcome. For a reaction with small excess energy and large reverse critical energy. KERD is shown to be mainly governed by the reverse critical energy.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 학술대회 논문집
• /
• pp.75-77
• /
• 2003

We have measured the escape rates of the Nb Josephson junction from its zero-voltage state. The critical current measurements were carried out in repeatedly sweeping the current-voltage characteristics of the junction with a current ramp. From the distribution of the critical current the escape temperature was determined by applying the thermal activation model.

• 한국IT서비스학회지
• /
• 제15권3호
• /
• pp.173-193
• /
• 2016

Start-ups do not have enough resources such as financial capital and established customer base. Knowledge base of start-up team members is the crucial and unrivaled resource. This study tries to explicate the knowledge sharing process occurring in this knowledge base of start-up teams. Adopting the knowledge process view, detail process of knowledge sharing process model is constructed consisting of knowledge sharing speed, quality and quantity in a form of nomological net and empirically tested. In addition, preceding antecedents and consequential outcomes of this knowledge sharing is also posited as part of the research model : knowledge state of the team leading to team creativity and agility via the explicated knowledge sharing process model. Also, as this knowledge based view are triggered by the advance of IT in general, IT support is conceptualized as an antecedent and measures are operationalized. 230 data points were collected from start-up teams. Via data analysis using PLS, theoretical relationships from knowledge state, IT support, knowledge sharing process and knowledge consequences are found to be empirically supported except a few not supported. Most of all, team agility and team creativity are theoretically supported and empirically validated as critical outcome variables beyond performance measures. Though agility and creativity has been discussed as critical construct in start-up teams, it has not be much validated empirically. Also, interestingly, IT support are found to be significantly impacting the knowledge sharing process as expected. Academic contributions and implications for practice are discussed at the end with limitations and further research.

• Nuclear Engineering and Technology
• /
• 제52권4호
• /
• pp.755-763
• /
• 2020

The critical flow phenomenon has been studied because of its significant effect for design basis accidents in nuclear power plants. Transition points from thermal non-equilibrium to equilibrium are different according to the geometric effect on the critical flow. This study evaluates the uncertainty parameters of the critical flow model for analysis of DBA (Design Basis Accident) with the MARS-KS (Multi-dimensional Analysis for Reactor Safety-KINS Standard) code used as an independent regulatory assessment. The uncertainty of the critical flow model is represented by three parameters including the thermal non-equilibrium factor, discharge coefficient, and length to diameter (L/D) ratio, and their ranges are determined using large-scale Marviken test data. The uncertainty range of the thermal non-equilibrium factor is updated by the MCDA (Model Calibration through Data Assimilation) method. The updated uncertainty range is confirmed using an LBLOCA (Large Break Loss of Coolant Accident) experiment in the LOFT (Loss of Fluid Test) facility. The uncertainty ranges are also used to calculate an LBLOCA of the APR (Advanced Power Reactor) 1400 NPP (Nuclear Power Plants), focusing on the effect of the PCT (Peak Cladding Temperature). The results reveal that break flow is strongly dependent on the degree of the thermal non-equilibrium state in a ruptured pipe with a small L/D ratio. Moreover, this study provides the method to handle the thermal non-equilibrium factor, discharge coefficient, and length to diameter (L/D) ratio in the system code.

• 한국지반신소재학회논문집
• /
• 제12권1호
• /
• pp.11-19
• /
• 2013

조립재료는 댐, 철도, 교량 구조물 건설시 제체, 성토재, 뒤채움재, 배수재 등으로 널리 사용되고 있으며, 이러한 구조물의 거동해석을 위한 수치해석을 위해 구성모델에 대한 연구가 다양하게 진행되어 왔다. 본 논문에서는 조립재료의 거동을 예측하기 위해 개발된 구성모델에 대한 변수 연구를 수행하였다. 구성모델은 한계상태이론에 근간한 bounding surface 모델로서 한 세트의 모델 정수를 활용하여 배수 조건, 구속압, 간극비에 상관없이 조립재료의 거동을 구현할 수 있는 장점을 지니고 있다. 구성모델은 탄성 파라미터, 한계상태 파라미터, 모델 고유파라미터를 활용하여 재료의 거동을 분석하며, 본 연구에서는 모델 고유 파라미터에 대한 변수 연구를 수행하였다. 변수 연구를 통해 구성모델이 조립재료의 가장 큰 특징인 비관계유통법칙(non-associative flow rule)에 따른 체적팽창 및 응력경로 변화에 따른 이동경화 현상을 적절히 모사할 수 있음을 파악하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1606-1609
• /
• 2002

MAC state models appeared with an effort to overcome technical demerits of CDMA in provisioning packet data service. In the scenario of sojourn and transition on MAC states, the design of state sojourn time is a critical issue for an efficient utilization of limited recource; a longer sojourn time leads to more resource being preserved for inactive stations, while more connection components should be recovered with a shorter sojourn time. Thus, the sojourn time at each MAC state must be optimized in consideration of these two conflicting arguments. In this paper, we first present a generic MAC state model. Secondly, based on the generic model, we reveal a relation of inactive period and the delay time of the last packet served in pre- ceding active period and specify a loss function reflect-ing two antinomic features that result from a change of state sojourn time. Using the proposed loss function, we construct a decision problem to find an optima3 rule for state sojourn times. Finally, we present a way of computing Bayes rule by use of the posterior distribution of inactivity duration for given observation on the delay time of last packet. Furthermore, Bayes rules are explicitly expressed for special arrival processes and investigated with respect to traffic load and loss parameters.

• 조명전기설비학회논문지
• /
• 제22권6호
• /
• pp.34-43
• /
• 2008

상태 공간 평균화 모델은 강압형, 승압형 및 승 강압형 DC/DC 컨버터에 적용이 가능하며, 특별한 계산이 필요 없는 높은 정밀도가 증명된 모델이다. 이러한 모델은 전류연속모드(CCM) DC/DC 컨버터에서 확립되었으며, 본 논문에서는 컨버터의 전류연속모드(CCM) 모델로부터 의미 있는 결론을 유도하고자 한다. 본 논문에서는 스위치 평균모델을 이용한 DC/ DC 컨버터의 전류불연속모드(DCM) 모델링 및 임계특성에 관하여 논하였다. 스위치 평균 모델은 전류연속모드(CCM)와 전류불연속모드(DCM) 사이의 DC/DC 컨버터의 경계 조건에 대한 모델로부터 유추할 수 있으며, 시뮬레이션과 실험에 의해서 스위치의 평균 모델의 주파수 응답 특성을 예측할 수 있었다. 본 연구에서는 MOSFET를 사용하여 입력전압 15[V], 출력전압 24[V], 출력전력 24[W]급 시스템을 제작하여 실험하였다.

• Wind and Structures
• /
• 제7권3호
• /
• pp.173-186
• /
• 2004

Flutter derivatives provide the basis of predicting the critical wind speed in flutter and buffeting analysis of long-span cable-supported bridges. In this paper, one popular stochastic system identification technique, covariance-driven Stochastic Subspace Identification(SSI in short), is firstly presented for estimation of the flutter derivatives of bridge decks from their random responses in turbulent flow. Secondly, wind tunnel tests of a streamlined thin plate model and a ${\Pi}$ type blunt bridge section model are conducted in turbulent flow and the flutter derivatives are determined by SSI. The flutter derivatives of the thin plate model identified by SSI are very comparable to those identified by the unifying least-square method and Theodorson's theoretical values. As to the ${\Pi}$ type section model, the effect of turbulence on aerodynamic damping seems to be somewhat notable, therefore perhaps the wind tunnel tests for flutter derivative estimation of those models with similar blunt sections should be conducted in turbulent flow.

• Journal of Advanced Research in Ocean Engineering
• /
• 제1권1호
• /
• pp.36-43
• /
• 2015

Since the crack generation and its propagation caused by welding defects is one of the main hull damage patterns, the simulation of crack propagation process has an important significance for ship safety. Based on interface element method, a finite element model to simulate crack propagation is studied in the paper. A Lennard-Jones type potential function is employed to define potential energy of the interface element. Tensile tests of steel flat plates with initial central crack are carried out. Surface energy density and spring critical stress that are suitable for the simulation of crack propagation are determined by comparing numerical calculation and tests results. Based on a large number of simulation results, the curve of simulation correction parameter plotted against the crack length is calculated.

• 대한교통학회지
• /
• 제27권6호
• /
• pp.129-137
• /
• 2009

첨단교통체계의 기술발전과 교통 분석의 수준이 상세해짐에 따라 동적 교통 분석에 대한 필요성이 증가하고 있다. 기존의 정적인 분석이 하루 평균 개념의 통행특성과 네트워크 상태를 묘사한 반면, 동적 분석에서는 시간흐름에 따른 네트워크의 상태를 분석한다. 본 논문에서는 교통시스템 동적 분석의 필요성을 인식하여, 고속도로망을 대상으로 FTMS 자료를 활용한 분석 방법론을 개발하였다. 개별 차량의 실제 통행기록 자료인 TCS 자료를 이용하여 전국 고속도로망을 대상으로 동적 기종점 통행량을 구축하였으며, 시뮬레이션 연산시간 문제 해결을 위해 분석범위를 설정한 Subarea 분석을 활용하였다. 이를 위해 전국 고속도로망을 대상으로 구축된 시간대별 기종점 통행량을 Subarea 기종점 통행량으로 전환하기 위한 방법론을 개발하였다. 구축된 모형의 적용을 위해 시나리오 분석을 실시하였으며, 이를 통해 각각의 시나리오에 대하여 기존의 단편적인 효과분석과 달리 하루 중 시간대별 교통여건에 따른 네트워크 상태분석을 수행하였다. 본 연구는 동적 교통 분석의 초기 시도라는 점과 실제 기종점 자료인 FTMS 자료를 활용한 분석이라는 점에서 의미를 가지며, 현재 교통 분석의 큰 흐름인 동적 교통 분석의 필요성을 부각시키고자 한다. 향후 고속도로뿐만이 아닌 기타 도로를 포함한 모형 구축이 필요하며, Hybrid 모형 및 프로그램 개발을 통해 궁극적인 목표인 실시간동적 분석 모형 개발을 위한 연산시간 문제 해결이 필요할 것이다.