• Steel and Composite Structures
• /
• 제30권3호
• /
• pp.281-292
• /
• 2019

In this paper, analysis of critical fluid velocity and heat transfer in the nanocomposite pipes conveying nanofluid is presented. The pipe is reinforced by carbon nanotubes (CNTs) and the fluid is mixed by $AL_2O_3$ nanoparticles. The material properties of the nanocomposite pipe and nanofluid are considered temperature-dependent and the structure is subjected to magnetic field. The forces of fluid viscosity and turbulent pressure are obtained using momentum equations of fluid. Based on energy balance, the convection of inner and outer fluids, conduction of pipe and heat generation are considered. For mathematical modeling of the nanocomposite pipes, the first order shear deformation theory (FSDT) and energy method are used. Utilizing the Lagrange method, the coupled pipe-nanofluid motion equations are derived. Applying a semi-analytical method, the motion equations are solved for obtaining the critical fluid velocity and critical Reynolds and Nusselt numbers. The effects of CNTs volume percent, $AL_2O_3$ nanoparticles volume percent, length to radius ratio of the pipe and shell surface roughness were shown on the critical fluid velocity, critical Reynolds and Nusselt numbers. The results are validated with other published work which shows the accuracy of obtained results of this work. Numerical results indicate that for heat generation of $Q=10MW/m^3$, adding 6% $AL_2O_3$ nanoparticles to the fluid increases 20% the critical fluid velocity and 15% the Nusselt number which can be useful for heat exchangers.

• 한국응용과학기술학회지
• /
• 제35권3호
• /
• pp.579-586
• /
• 2018

본 연구에서는 지방 알코올을 이용하여 탄소 길이에 따른 술폰산계 음이온 계면활성제를 합성하였으며, 합성한 계면활성제들의 구조를 FT-IR과 $^1H$ NMR 분석을 통하여 확인하였다. 음이온 계면활성제의 임계미셀농도(critical micelle concentration: cmc)는 $10^{-5}{\sim}10^{-3}mol/L$이며, 임계미셀농도에서의 표면장력 값은 26~32 mN/m이었다. 합성한 술폰산계 계면활성제의 분자당 최소 영역값은 $1.68{\sim}1.30nm^2$이다. 음이온 계면활성제의 분자당 최소 영역이 감소하였다. 합성한 계면활성제의 물성은 임계 미셀농도, 기포력, 유화력, 접촉각을 측정하였다.

• 한국자기학회지
• /
• 제1권2호
• /
• pp.15-21
• /
• 1991

고온초전도체 $Y_{1}Ba_{2}Cu_{3-x}Sn_{x}O_{7-y}$에서 Cu 대신에 Sn 을 치환하면서 이들의 조성변화에 따른 자기적 특성을 vibrating sample magnetometer(VSM)와 torque magnetometer를 이용 하여 측정하였다. Cu 대신에 Fe, Ni 등의 원소를 치환했을 때와는 달리 x=0.36 까지 되어도 초전도 전이온도가 90 K 이상을 나타냄을 알 수 있었다. 온도와 외부자기장에 따른 자기 모우먼트 측정을 통하여 각 조성에 따른 lower critical field ($H_{c1}(T)$)과 upper critical field ($H_{c2}(T)$)를 측정하였다. 이 결과를 이용해 $H_{c1}(0)$과 $H_{c2}(0)$를 계산했으며, 간섭길이 (${\varepsilon}_{0}$), 침투깊이 (${\lambda}_{0}$), Ginzburg-Landau 상수 k등을 얻을 수 있었으며, 시료의 flux pinning 효과도 확인할 수 있었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제17권2호
• /
• pp.25-30
• /
• 2015

In order to realize economical applications, it is important to reduce the ac loss of 2G high-temperature superconductor coated conductors. It seems to be reasonable that a multi-filamentary wire can decrease the magnetization loss. In this study, we prepared two samples of YBCO coated conductors with striations. We measured local superconducting properties of both samples by using Low Temperature Scanning Laser and Hall Probe Microscopy (LTSLHPM). The distribution of the local critical temperature of samples was analyzed from experimental results of Low Temperature Scanning Laser Microscopy (LTSLM) near the superconducting transition temperature. According to LTSLM results, spatial distributions of the local critical temperature of both samples are homogeneous. The local current density and the local magnetization in samples were explored from measuring stray fields by using Scanning Hall Probe Microscopy (SHPM). From SHPM results, the remanent field pattern of the one bridge sample in an external magnetic field confirms the Bean's critical state model and the three bridge sample has similar remanent field pattern of the one bridge sample. The local magnetization curve in the three bridge sample was measured from external fields from -500 Oe to 500 Oe. We visualized that the distribution of local hysteresis loss are related in the distribution of the remanent field of the three bridge sample. Although the field dependence of the critical current density must be taken into account, the relation of the local hysteresis loss and the remanent field from Bean's model was useful.

• 한국가스학회지
• /
• 제12권1호
• /
• pp.1-6
• /
• 2008

샤피충격시험은 동적하중 하에 있는 고분자 재료의 거동을 이해하는데 가장 널리 사용되고 있는 방법이다. 본 연구에서는 샤피충격시험장치에서 얻어지는 파단에너지를 사용하여 나일론 소재 샤피 시편의 노치각도에 따른 에너지 해방율을 구하는 방법을 제시하였다. 또한 샤피충격시험장치를 계장화하여 최대 하중과 파단 시까지 소요되는 에너지 등의 파손인자들을 산출하였다. 그리고 노치각도에 따른 동적파괴 인성치와 유한요소법을 사용하여 중앙집중 하중 하에서 사피 시편의 노치각도에 따른 응력분포를 산출하였다.

• 공업화학
• /
• 제30권1호
• /
• pp.102-107
• /
• 2019

본 논문은 탄소 길이에 따른 지방족 알코올과 사코진과 타우린을 이용하여 음이온 계면활성제를 합성하였으며, 합성한 계면활성제들의 구조를 $^1H$ NMR 분석을 통하여 확인하였다. 합성 음이온 계면활성제의 임계미셸농도는 $10^{-2}{\sim}10^{-4}mol/L$이며, 임계미셸농도에서의 표면장력 값은 21~39 mN/m이었다. Ross-Miles 방법에 의하여 탄소 12개일 때의 합성계면활성제가 좋은 기포력과 기포안정성을 갖는 것을 확인하였다. 또한, 사코진을 이용한 계면활성제는 대두유에서 타우린을 이용한 계면활성제는 벤젠에서 유화력이 좋음을 알 수 있었다. 합성한 계면활성제의 물성은 임계미셸농도, 기포력, 유화력을 측정하여 평가하였다.

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1248-1254
• /
• 2018

Magnetization versus temperature and magnetic-field measurements, M(T, $H_a$), have been carried out to study the magnetic and critical properties of polycrystalline $La_{1-x}Ba_xCoO_3$ (x = 0.3 and 0.5) cobaltites. These compounds with the density of ${\sim}6.2g/cm^3$ crystallized in the $R{\bar{3}}c$ rhombohedral and $Pm{\bar{3}}m$ cubic structures, respectively. With an applied field $H_a=200Oe$, M(T) data have revealed that the samples with x = 0.3 and 0.5 exhibit the ferromagnetic-paramagnetic (FM-PM) phase transition at the Curie temperature points $T_C=202$ and 157 K, respectively. At 4.2 K, the saturation magnetization ($M_{sat}$) decreases from 35.9 emu/g for x = 0.3-26.1 emu/g for x = 0.5. Particularly, the critical-behavior analyses in the vicinity of $T_C$ reveal all samples undergoing a second-order phase transition, with critical exponent values (${\beta}=0.328$ and ${\gamma}=1.251$ for x = 0.3, and ${\beta}=0.331$ and ${\gamma}=1.246$ for x = 0.5) close to those expected for the 3D Ising model. This proves short-range magnetic order existing in $La_{1-x}Ba_xCoO_3$. We believe that magnetic inhomogeneities due to the mixture of hole-rich FM regions (confined in the trivalent-cobalt hole-poor anti-FM matrix) and uniaxial anisotropy prevent long-range order in $La_{1-x}Ba_xCoO_3$.

• Korean Chemical Engineering Research
• /
• 제43권5호
• /
• pp.632-636
• /
• 2005

본 실험은 화학적 표면처리된 탄화규소(SiC)가 PMMA 나노복합재료의 열안정성 및 기계적 계면특성에 미치는 영향에 대하여 고찰하였다. 표면처리된 SiC의 표면특성은 산 염기도, 접촉각 측정 그리고 FT-IR을 사용하여 알아보았으며, SiC/PMMA 나노복합재료의 열안정성은 열중량 분석을 통하여 알아보았다. 또한, 기계적 계면물성은 임계응력 세기인자(critical stress intensity factor, $K_{IC}$)와 임계 변형에너지 방출속도(critical strain energy release rate, $G_{IC}$) 측정을 통해 고찰하였다. 실험결과, 산성 용액으로 표면처리한 SiC(A-SiC)의 표면 산도가 염기성(B-SiC) 또는 표면처리 하지 않은 SiC(V-SiC)보다 높았으며, 접촉각 측정 결과, 산성 용액으로 표면처리는 극성요소의 증가에 기인하는 A-SiC의 표면자유에너지를 증가시켰다. $K_{IC}$와 $G_{IC}$같은 기계적 계면성질은 A-SiC가 향상되었는데, 이러한 결과는 충전재와 고분자 사슬간의 산 염기 상호작용에 의한 계면결합력의 향상에 의한 것으로 판단된다.

• Journal of Pharmaceutical Investigation
• /
• 제29권3호
• /
• pp.193-203
• /
• 1999

In order to investigate systematically the steady shear flow properties of aqueous po1y(ethylene oxide) (PEO) solutions having various molecular weights and concentrations, the steady flow viscosity has been measured with a Rheometrics Fluids Spectrometer (RFS II) over a wide range of shear rates. The effects of shear rate, concentration, and molecular weight on the steady shear flow properties were reported in detail from the experimentally measured data, and then the results were interpreted using the concept of a material characteristic time. In addition, some flow models describing the non-Newtonian behavior (shear-thinning characteristics) of polymeric liquids were employed to make a quantitative evaluation of the steady flow behavior, and the applicability of these models was examined by calculating the various material parameters. Main results obtained from this study can be summarized as follows: (1) At low shear rates, aqueous PEO solutions show a Newtonian viscous behavior which is independent of shear rate. At shear rate region higher than a critical shear rate, however, they exhibit a shear-thinning behavior, demonstrating a decrease in steady flow viscosity with increasing shear rate. (2) As an increase in concentration and/or molecular weight, the zero-shear viscosity is increased while the Newtonian viscous region becomes narrower. Moreover, the critical shear rate at which the transition from the Newtonian to shear-thinning behavior occurs is decreased, and the shear-thinning nature becomes more remarkable. (3) Aqueous PEO solutions show a Newtonian viscous behavior at shear rate range lower than the inverse value of a characteristic time $1/{\lambda}_E$, while they exhibit a shear-thinning behavior at shear rate range higher than $1/{\lambda}_E$. For aqueous PEO solutions having a broad molecular weight distribution, the inverse value of a characteristic time is not quantitatively equivalent to the critical shear rate, but the power-law relationship holds between the two quantities. (4) The Cross, Carreau, and Carreau-Yasuda models are all applicable to describe the steady flow behavior of aqueous PEO solutions. Among these models, the Carreau-Yasuda model has the best validity.

• Journal of Biosystems Engineering
• /
• 제30권6호통권113호
• /
• pp.360-365
• /
• 2005

Precision agriculture attempts to improve cropping efficiency by variable application of crop treatments such as fertilizers and pesticides, within field on a point-by-point basis. Therefore, a more complete understanding of the relationships between yield and soil properties is of critical importance in precision agriculture. In this study, the functional relationships between measured soil properties and rice yield were investigated. A supervised back-propagation neural network model was employed to relate soil chemical properties and rice yields on a point-by point basis, within individual site-years. As a results, a positive correlation was found between practical yields and predicted yields in 1999, 2000, 2001, and 2002 are 0.916, 0.879, 0.800 and 0.789, respectively. The results showed that significant overfitting for yields with only the soil chemical properties occurred so that more of environmental factors, such as climatological data, variety, cultivation method etc., would be required to predict the yield more accurately.