• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.736-742
• /
• 2000

Mass removed from crystalline silicon samples during high power single-pulse laser ablation was studied by measuring the resulting crater morphology with a white light interferometric microscope. The volume and depth of the craters show a strong nonlinear change as the laser irradiance increases across a threshold value, that is, approximately $2.2{\times}10^{10}\;W/cm^2$. Time-resolved shadowgraph images of the ablation plume show the ejection of large particulates from the sample for laser irradiance above the threshold, with a time delay of about 300-400 nsec. The thickness of superheated liquid layer near the critical temperature was numerically estimated, considering the transformation of liquid metal into liquid dielectric near the critical state (i.e., induced transparency). The estimated thickness of the superheated layer at a delay time of 200 nsec agreed with the measured crater depths, suggesting that induced transparency promotes the formation of a deep superheated liquid layer which leads to an explosive boiling responsible for the sudden increase of crater volume and depth.

• Progress in Superconductivity and Cryogenics
• /
• v.16 no.4
• /
• pp.26-30
• /
• 2014

We investigate the upper critical field anisotropy ${\Gamma}_H$ and the magnetic penetration depth anisotropy ${\Gamma}_{\lambda}$ of a high-quality $FeSe_{1-x}$ single crystal using angular dependent resistivity and torque magnetometry up to 14 T. High quality single crystals of $FeSe_{1-x}$ were successfully grown using $KCl-AlCl_3$ flux method, which shows a sharp superconducting transition at $T_C{\sim}9K$ and a high residual resistivity ratio of ~ 25. We found that the anisotropy ${\Gamma}_H$ near $T_C$ is a factor of two larger than found in the poor-quality crystals, indicating anisotropic 3D superconductivity of $FeSe_{1-x}$. Similar to the 1111-type Fe pnictides, the anisotropies ${\Gamma}_{\lambda}$ and ${\Gamma}_H$ show distinct temperature dependence; ${\Gamma}_H$ decreases but ${\Gamma}_{\lambda}$ increases with lowering temperature. These behaviors can be attributed to multi-band superconductivity, but different from the case of $MgB_2$. Our findings suggest that the opposite temperature dependence of ${\Gamma}_{\lambda}$ and ${\Gamma}_H$ is the common properties of Fe-based superconductors.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.315-318
• /
• 1988

THE STUDY ABOUT CHARACTERISTICS OF PHOTO RESIST ITSELF (MINIMUM RESOLUTION, DEPTH OF FOCUS MARGIN AND CRITICAL DIMENSION CONTROL LATITUDE) WAS DONE AND REPORTED. THREE TYPES OF PHOTO RESISTS WERE TESTED. THE FIRST IS THE LOW MOLECULAR WEIGHT PHOTO-RESIST SHOWING THE NARROW DISTRIBUTION OF MOLECULAR WEIGHT (LOW MOLECULAR WEIGHT CONTROL TYPE), THE SECOND IS A PHOTO-RESIST CONTAINING THE INNER CONTRAST ENCHANCEMENT MATERIAL (INNER CEM TYPE) AND THE THIRD IS A NORMAL PHOTO-RESIST (HIGH MOLECULAR WEIGHT TYPE). THE INNER CEM TYPE AND THE LOW MOLECULAR WEIGHT CONTROL TYPE PHOTO-RESIST ARE MORE IMPROVED PHOTO-RESISTS. IT PROVED THAT THE MINIMUM RESOLUTION WAS IMPROVED BY 0.2 - 0.3 um, THE DEPTH OF FOCUS MARGIN WAS IMPROVED BY 0.8 - 1.2 um AND THE C.D. CONTROL LATITUIDE WAS IMPROVED.

• Journal of Korean Critical Care Nursing
• /
• v.14 no.3
• /
• pp.99-112
• /
• 2021

Purpose : This study aimed to comprehensively understand the work experience of the person in charge of the adequacy evaluation of small-and medium-sized hospitals and explore its meaning and essence in-depth. Methods : This was a descriptive qualitative study. The study participants were 10 nurses who understood the purpose of this study and participated voluntarily. Data collection was conducted via in-depth interviews in January 2021. The interviews were conducted 1-2 times per participant and lasted approximately 40-50 minutes per session. Data analysis was performed using a qualitative content analysis. Results : The work experience of the person in charge of the adequacy evaluation of small-and medium-sized hospitals included four themes: "difficulty in preparing for evaluation," "negative views on evaluation," "lack of a support system," and "positive improvements and changes due to an evaluation." Conclusion : Based on the above results, an education program and support system should be developed to strengthen the competence of nurses in charge of the adequacy evaluation of small- and medium-sized hospitals.

• Journal of agricultural medicine and community health
• /
• v.48 no.3
• /
• pp.189-204
• /
• 2023

Objectives: The goals of this study are to exploring critical factors and methods to improve Korean Community Care through the cases of GyeongsangNamdo. Methods: For this study, we performed in-depth interviews with 90 people involved in Community Care services of 6 regions, and the collected data were analyzed. The collected data were analyzed utilizing NVivo12. In the end, we reconfirmed the process through Topic Modeling analysis. Results: We conducted descriptive statistics and qualitative data analysis collected through surveys and in-depth interviews. In the case of qualitative analysis, we extracted principle codes (Need, Lack, Absence), and sorted the contents into sub-categories. The response rate of 'Need to strengthen capabilities' was the highest, 'Need to communicate and share information' was the second, and 'Need for integrated operation and a control tower' was the third. Conclusion: As a result, we find the critical factors to improve Community Care. Based on them, we should conduct follow-up researches to propose concrete methods to apply to diverse regions.

• Journal of the Korean Institute of Navigation
• /
• v.13 no.3
• /
• pp.21-36
• /
• 1989

The submarine played an active part in military operation during the last of nineteenth century. Today, as an aid to science and technology and technology m the submarine is being utilized in the fields of deep sea investigation and sight-seeing as well as military activities. When the stability and the maneuverability of a submarine is studied, the problems arise on the vertical plane as well as the horizontal plane. However, the horizontal plane has been dealt with in the study of surface vessels. The author attempts to look into the hydrodynamic directional stability at high speeds (above 10knots) on the vertical plane, and to clarify the submarine's depth-rate as related to the factors that affect it : the distance from the center of buoyancy to the center of gravity, the speed of the submarine, and the position and the area ratio of hydroplane. In this study, the author considered the two groups of dimensionless derivatives of submarine. It is confirmed that the depth-rate of a submarine is decreased when the length, of BG is increased under the continuous submerging status. But the depth-rate is increased when the area ratio of hydroplane is enlarged. It is also confirmed that a submarine has only one critical speed in accordance with the shape of its hull, but unconcerned with its speeds.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.17-22
• /
• 2006

Shear modulus is directly linked to material's stiffness and is one of the most critical engineering parameters. Seismically, shear-wave velocity (Vs) is its best indicator. Although methods like refraction, down-hole, and cross-hole shear-wave surveys can be used, they are generally known to be tougher than any other seismic methods in field operation, data analysis, and overall cost. On the other hand, surface waves, commonly known as ground roll, are always generated in all seismic surveys with the strongest energy, and their propagation velocities are mainly determined by Vs of the medium. Furthermore, sampling depth of a particular frequency component of surface waves is in direct proportion to its wavelength and this property makes the surface wave velocity frequency dependent, i.e., dispersive. The multichannel analysis of surface waves (MASW) method tries to utilize this dispersion property of surface waves for the purpose of Vs profiling in 1-D (depth) or 2-D (depth and surface location) format. The active MASW method generates surface waves actively by using an impact source like sledgehammer, whereas the passive method utilizes those generated passively by cultural (e.g., traffic) or natural (e.g., thunder and tidal motion) activities. Investigation depth is usually shallower than 30 m with the active method, whereas it can reach a few hundred meters with the passive method. Overall procedures with both methods are briefly described.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.3
• /
• pp.121-125
• /
• 2016

The effect of temperature and pressure in the nitrogen ambient furnace on bulk micro defect (BMD) and denuded zone (Dz) is experimentally investigated. It is found that as pressure increases, Dz depth increases with a small decrease of BMD density in the range of temperature, $100{\sim}300^{\circ}C$. BMD density with hot isostatic pressure treatment (HIP) at temperature of $850^{\circ}C$ is higher than that without HIP while Dz depth is lower due to much higher BMD density. As the pressure increases, BMD density is increased and saturated to a critical value, and Dz depth increases even if BMD density is saturated. The concentration of nitrogen increases near the surface with increasing pressure, and the peak of the concentration moves closer to the surface. The nitrogen is gathered near the surface, and does not become in-diffusion to the bulk of the wafer. The silicon nitride layer near the surface prevents to inject the additional nitrogen into the bulk of the wafer across the layer. The nitrogen does not affect the formation of BMD. On the other hand, the oxygen is moved into the bulk of the wafer by increasing pressure. Dz depth from the surface is extended into the bulk because the nuclei of BMD move into the bulk of the wafer.

• Journal of Information Processing Systems
• /
• v.16 no.1
• /
• pp.155-170
• /
• 2020

Passive ranging is a critical part of machine vision measurement. Most of passive ranging methods based on machine vision use binocular technology which need strict hardware conditions and lack of universality. To measure the distance of an object placed on horizontal plane, we present a passive ranging method based on monocular vision system by smartphone. Experimental results show that given the same abscissas, the ordinatesis of the image points linearly related to their actual imaging angles. According to this principle, we first establish a depth extraction model by assuming a linear function and substituting the actual imaging angles and ordinates of the special conjugate points into the linear function. The vertical distance of the target object to the optical axis is then calculated according to imaging principle of camera, and the passive ranging can be derived by depth and vertical distance to the optical axis of target object. Experimental results show that ranging by this method has a higher accuracy compare with others based on binocular vision system. The mean relative error of the depth measurement is 0.937% when the distance is within 3 m. When it is 3-10 m, the mean relative error is 1.71%. Compared with other methods based on monocular vision system, the method does not need to calibrate before ranging and avoids the error caused by data fitting.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.623-626
• /
• 2004

The purpose of this paper is to determinate and to confirm p-n junction depth with nondestructive method by using electron beam. By measuring the critical short circuit current on the p-n junction which induced by electron beam and calculating generation range, the diffusion depth can be obtained. It ran be seen that values destructively measured by constant angle lapping and nondestructively by this study almost concur. As this result, it is purposed that diffusion depth of p-n junction can be easily measured by non-destruction. And this nondestructive method ran be recommended highly to the industrial analysis.