• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8B
• /
• pp.657-666
• /
• 2008

The intersection collision avoidance service among various telematics application services is regarded as one of the most critical services with regard to safety. In such safety applications, real-time, correct transmission of service is required. In this paper, we study on efficient infrastructure architecture for intersection collision avoidance using a cooperative mechanism between vehicles and wireless infrastructure. In particular, we propose an infrastructure, called CISN (Cooperative Infrastructure associated with Sensor Networks), in which proper numbers of sensor nodes are deployed on each road, surrounding the intersection. In the proposed architecture, overall service performance is influenced by various parameters consisting of the infrastructure, such as the number of deployed sensor nodes, radio range and broadcast interval of base station, and so on. In order to test the feasibility of the CISN model in advance, and to evaluate the correctness and real-time transmission ability, an intersection sensor deployment simulator is developed. Through various simulations on several environments, we identify optimal points of some critical parameters to build the most desirable CISN.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1360-1363
• /
• 1996

EPD(End Point Detection) is used to decide etching degree of layer which must be removed at wafer etching process in plasma etching process which is one of the most important process in semiconductor manufacturing. In this thesis, the method which detects malfunction of etching process in real-time will be discussed. Several EPD signal traces are collected in normal plasma etching condition and used as reference EPD signal traces. Critical points can be detected by applying differentiation and zero-crossing techniques to reference EPD signal. Mean and standard deviation of critical parameters which is memorized from reference EPD signal are calculated and these determine the lower and higher limit of control chart. And by applying statical control chart to EPD signals which are collected in real etching process malfunctions of process are detected in real-time. By means of applying this method to the real etching process we prove our method can accurately detect the malfunction of etching process and can compensate disadvantage of current industrial method.

• Journal of information and communication convergence engineering
• /
• v.16 no.1
• /
• pp.31-37
• /
• 2018

In this work, we propose an analytic framework for evaluating the quality of service and dimensioning the link capacity in the gateway router of a smart farm with a greenhouse eco-management system. Specifically, we focus on the gateway router of an IoT network that provides an access service for smart farms. We design the link capacity of a gateway router that is used for the remote management of the greenhouse eco-management system to accommodate both time-critical and delay-tolerant traffic in a greenhouse LAN. For this purpose, we first investigate the ecosystem for smart farm, and we define the specification and requirements of the greenhouse eco-management system. Second, we propose a system model for the link capacity of a gateway that is required to guarantee the delay performance of time-critical applications in the greenhouse LAN. Finally, the validity of the proposed system is demonstrated through a series of numerical experiments.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.609-611
• /
• 1999

The purpose of this research is on figuring out the optimal PID parameter using critical gain and critical frequency that are obtained by relay feedback. The operating has been done under the condition that the least information about the object plant is given and also the operating is processed within the limit which dose not give rise to bad influence on the object plant. For simulation auto-tuning PID controller using relay feedback which also works on on-line at the same time is developed by the upper procedure. This algorithm is tried to apply to level-temperature control plant on a real time with PC Interface Card.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.74.1-74
• /
• 2001

In this paper, we deal with an allocation model of vertical type container yard for minimizing the total ATC work time and the equivalence of ATC work´s load in each block on automated container terminal. Firstly, a layout of automated container terminal yard is shown. The characteristic of equipment which is operated in the terminal and basic assumption are given. Next, an allocation model which concerns with minimizing the total work time and the equivalence of work´s load is proposed for the effectiveness of ATC work in automated container terminal. Also, a weight values on critical function are suggested to adjust the critical values by evaluating the obtained allocation plan. To find the solution of allocation model in given terminal yard situation, a GA is applied, where the real information of container is used ...

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.152.1-152
• /
• 2001

This paper presents a high performance and cost effective way by using an FPGA circuit to implement torque controller so that the SRM can operate at high speed. In order to increase the operating speed, we need to implement both the torque and the current controllers by using an FPGA. However, it is difficult to implement all of the torque controller in the FPGA. Moreover, implementation of a time critical part is sufficient for improving the performance. One of the time critical part is the switching angle control. In this study, torque controller which calculate the switching on and commutation angles is implemented in PC because these angle are a function of rotor velocity which is varied slowly, and switching angle controller ...

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.404-409
• /
• 2000

Characteristics of secondary vortices is topologically investigated in the near-wake region of a circular cylinder where the Taylor hypothesis does not hold. The three-dimensional flow fields in the wake-transition regime were measured by a time-resolved PIV. For the analysis in a moving frame of reference, the convection velocity of the Karman vortices is evaluated from the trajectory of vortex center which is defined as the centroid of the vorticity field. Then, a saddle point is obtained by applying the critical point theory. Science the distributions of fluctuating Reynolds stresses defined by triple-decomposition are closely related with the existence of secondary vortices. the physical meaning of them is explained in conjunction with vortex center and saddle point trajectories. Finally, the temporal evolution of streamwise vortex is also discussed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.516-520
• /
• 1996

This paper focues on development of a timer selection algorithm for IEEE802.4 token bus networks to serve large-scale integrated manufacturing systems. Such factory automation networks have to satisfy delay constraints imposed on time-critical messages while maintaining as much network capacity as possible for non-time-critical messages. Therefore, the object of this paper is to develop timer selection algorithm to minimize a certain penalty function. This paper presents an algorithm based on Genetic Algorithm. The efficacy of the algorithm has been demonstrated by a series of simulation experiments.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.1014-1017
• /
• 2000

Reliability engineering is regarded as the major and important roll for all industry. And advanced manufacturing systems with high speed and intelligent have been developed for the betterment of machining ability. In this study, we have systemized evaluation of reliability for machinery system. We proposed the reliability assessment and design review method using analyzing critical units of high speed and intelligent machine system. In addition, we have not only designed and developed test bed system for acquiring reliability data, but also have constructing WEB system for suppling reliability which is provided in design phase. From this study, we will expect to guide and introduce the reliability engineering in developing and processing phase of high quality product.

• Computational Structural Engineering : An International Journal
• /
• v.1 no.1
• /
• pp.71-80
• /
• 2001

A reliability approach to evaluate structural performance has gained increased acceptability and usage over the past two decades. Most reliability analyses are based on the reliability of an individual component without examining the entire structural system. These analyses often result in either unnecessary repairs or unsafe structures. This study uses examples of series, parallel, and series-parallel models of structural systems to illustrate how the component reliabilities affect the reliability of the entire system. The component-system reliability interaction can be used to develop optimum lifetime inspection and repair strategies for structural systems. These examples demonstrate that such strategies must be based on the reliability of the entire structural system. They also demonstrate that the location of an individual component in the system has a profound effect on the acceptable reliability of that component. Furthermore, when a structure is deteriorating over time, the reliability importance of various components is a1so changing with time. For this reason, the most critical component in the early life of the structure may not tie the most critical later.